Nibbi Carb Install & Review on YCF 150 Pit Bike

Подписаться 101

Просмотров 17 тыс.

50% 1

24mm model with flange, took it out to track after this video, veerrryy happy with how it runs now. Power all the way through rev range. Came with all parts needed, pulled out 112 main jet, and put in the 108 it came with and stayed there.

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@Eric-kx6mu 3 месяца назад

Tanks a lot fort the tips , run very good on my YCF 150 2022, a new bike !!!

@BeaSTly_Kiila Год назад

I got this carb for my gy6 150 short case mini bike and it’s amazing

@evoquesquad2015 11 месяцев назад

good carb bro i love nibbl

@seanmulvaney5607 2 года назад

That plastic heat shield did look odd, usdually heat shields have a little valley for a rubber gasket to slide into and that side faces the engine, with a normal gasket on top of that against the carb. And I put a vm 26 Nibbi on my 140 engine which I beige is the same engine as that one. Both from zongshen. And the 26 was is almost too much. And I hear they run best without any adjustments right out the box. And 19mm is for a 110. And yeah the the 26 mm has tons of pull out the bottom almost to much. I believe mine was at 130 pilot jet and a 110 or 115 main but the 24 is prolly the best choice as prolly with a foam uni air filter I’m not sure about the box. Now I e gif a Daytona with a 28 keihin and heard I could go up to a 33mm but I’d want an EFI 33mm or a billitron 33, or a yoshimera 33 so it’s not too violent . I bet the smaller carb was put on to please emissions regulators. They ussually are

@BeaSTly_Kiila Год назад

Got a sub from me ty for the help I just needed to change my needle and the spring washer was throwing me off

@MrWins_ 2 года назад

Russia is watching you Very cool

@MrWins_ Год назад

Man, like you! I also put the pe24 on the f150 with a 108 jet, as you recommended. Thank you very much from Russia!

@mafu420pr7 2 года назад

Do you install out of the box or do some tunning before?

@permigs 2 года назад

Hi, what pilot jet did you use?

@professorchucke4087 6 месяцев назад

Did it come with the Nibbi on it? You put a 22 on it ? I want to know what size was on it originally and what size is your new carb? And why did you need the new one? Thanks

@toryharris2142 5 месяцев назад

the nibbi came stock on the bike and it was a 19mm and he put a new 24mm carb on it

@RicardoSilva-qp4bb 2 года назад

I believe the 2020 models (and before) came with a Mikuni 26mm from factory. I wonder what took YCF to make such a big jump on carb "size" for the 2021 model... 🤔 Nice videos. 👍

@randomhobbieschannel 2 года назад

I’m not sure what would have sparked the change (emissions maybe?) but this was definitely an improvement and helped it to rev out and pull gears longer.

@RicardoSilva-qp4bb 2 года назад

@@randomhobbieschannel Appreciate the info. Good to know, for anyone interested in one if these bikes. 👍

@clipsandshortsfn Год назад

I have a 2015 Ycf 150 as a project bike, what is the best gear ratio for top speed? Has perfect power but just wanting somthing that didn’t rev out so hard

@remdog1231 3 года назад

How are you liking the pilot150 as a whole? I just ordered one myself. Should be here next week. Any complaints of quality?

@randomhobbieschannel 3 года назад

I like it, no major complaints really, hoping to do a full review video soon with some riding in it 👍. Only thing was the air box thread inserts come out so I glued them. Make sure to check that so you don’t end up riding with no air filter…

@arturoperez2028 Год назад

Stock Throttle cable? Now trying to install nibbi 26...

@loganchandler4041 3 года назад

where did you buy the carburetor from? i just bought the last pilot 150 from moto d racing! im trying to follow your steps 😄

@randomhobbieschannel 3 года назад

Nice! Your gonna have a blast with it. I just bought it from Amazon like most things 🤣. Search this, B089CRJTVZ, will bring it right up in amazon. Make sure to subscribe! Still need to do full review and some other setup/ride videos

@loganchandler4041 3 года назад

@@randomhobbieschannel hell yeah dude thank you for the help

@zcmx5732 2 года назад

How is the air draw through the factory boot/box? I saw others go to external UNI POD filters but I was recommended not to do so and stay with the airbox. Going to order this for my Pilot 150 today

@randomhobbieschannel 2 года назад

As far as I know and looking at inlet/filter size I'd say it's fine. Even better the box keeps a lot of dirt and contaminants from clogging up the filter and keeps water off it. I'd recommend leaving it as is. Only drawback I see is the design for changing it isn't great, definitely didn't need all the Allen bolts just to hold the cover on

@isozero7265 2 года назад

I cannot find the exact Nibbi carb for my 150 Pilot. I can find a 24mm that looks identical but the stenciled part number is slightly different. Hmmmm I wonder if installing a 26 would be too much?

@randomhobbieschannel 2 года назад

I'm not sure, to clarify this is a 24mm Nibbi Flange model. I don't think a 26 would be too big, but might be harder to get tuned just right with reduced air velocity at lower rpm

@loganchandler4041 2 года назад

Would you recommend the same jetting for a lower elevation? im around 1300ft to 3000ft where i live

@randomhobbieschannel 2 года назад

Yeah it works there too, was just down at 2,000 last weekend and it probably ran even cleaner then here at 5k.

@loganchandler4041 2 года назад

@@randomhobbieschannel oh ok right on, so 108 main jet and did you mess with the air/fuel ratio screw or pilot jet at all?

@randomhobbieschannel 2 года назад

@@loganchandler4041 Just changed the main. Don’t believe I even touched the air screw, and left pilot jet alone as well.

@loganchandler4041 2 года назад

@@randomhobbieschannel Thank you for all your help, I appreciate everything man 👍🏻

@Letsstatethefkinobviousshallwe Год назад

What's the jetting size you use for poilet and main jet

@Ethan12326 Год назад

We’re was the jet located when you changed it?

@kjsmolik 2 года назад

Whats tge part number of this nibbi. I can't seem to find it with the flange

@pnkrckr 2 года назад

Pe24fl

@tylerseabook9423 Год назад

How much was that carb

@carlossaravia8292 2 года назад

Can you show the model of the carb or part number please

@randomhobbieschannel 2 года назад

For sure, it’s a Nibbi PE24FL. This is the way to go for sure, in my opinion, as it bolts right in like the stock one as it’s 80% the same carb. Posted the number to search in Amazon in another comment, takes you right to it.