Тёмный
No video :(

Nikon Coolpix L820: Disassembly and Repair 

C. David Graves
Подписаться 3,4 тыс.
Просмотров 25 тыс.
50% 1

The Nikon Coolpix L820 is a mid level, semiprofessional digital camera. It takes 16 MP still images and 1080p video. It has a 30x Nikon Telescopic lens. It was manufactured in 2013. A user manual is available from Nikon:
cdn-10.nikon-c...
This Nikon Coolpix L820 digital camera was completely dead. It is likely that the camera was dropped. The battery cover is partially broken.
This is a "how to" video on disassembly, trouble shoot and repair. It is a step-by-step guide intended for a general audience. More advanced users may find it a bit slow.
The camera was approximately 60% disassembled. Disassembly was not taken to completion because the cause of the failure was discovered. Specifically, there was a loss of ground to the circuit board. A jumper wire was soldered in which fixed the problem. The disassembly did not include removal of the front cover and the telescopic lens was not exposed.
A note of caution: This is a difficult camera to work on. The main circuit board is soldered to the camera. There is a daughter board which is soldered to the main board at a 90 degree angle. I suggest you do not attempt to do this unless you have good soldering skills and equipment.

Опубликовано:

 

24 июн 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 34   
@praveentechnic
@praveentechnic 2 года назад
Thanks a lot, i had one of these not working and completely dead for years. i took it apart today as per your instructions and noticed the same problem as you. fixed it with a jumper wire and works great. Thanks a lot for this video
@c.davidgraves4848
@c.davidgraves4848 2 года назад
Fantastic. It must be a common design flaw.
@richardfrankel1181
@richardfrankel1181 2 года назад
A really well produced video, with excellent commentary of the tech. detail / screw sizes etc. I have an earlier version of the same camera (L310), which has an intermittent power problem, so I’m going to try the same strip down.
@stevemarlow4738
@stevemarlow4738 Год назад
superb guide - thanks so much for posting
@mimojapan
@mimojapan Год назад
Thanks much for the detailed information! I've got the same model and that battery door seems like a design flaw. Nine too is broken at the very same spots. Still haven't figured out how to fix it, Cheers!
@gabrielmendez4124
@gabrielmendez4124 3 месяца назад
Excelente amigo!!!... gracias x tu tiempo!!!...super prolijo y detallado!!!..saludos desde Argentina!
@Lee-haw
@Lee-haw Год назад
Very good walkthrough 👍 Many thanks
@Mikesdrumchannel-kj8qv
@Mikesdrumchannel-kj8qv 3 месяца назад
I have a question about the battery terminals. At some point in that procedure was would there have been an opportunity to repair a battery terminal in the bottom of the battery compartment that was broken while cleaning corrosion? Great video and much appreciated.
@troytaylor1913
@troytaylor1913 28 дней назад
I find the parts and fix them. After you have done it a few times it's not that hard. For my personal cameras, I was using Olympus but I switched to Nikon, I get broken cameras on eBay the same model then I take one apart and put it back together for practice because every camera is different, and then I have spare parts and extra cameras. I like to have sacrificial cameras because they might get destroyed. It's good to have spare parts, I just got a P520 18-megapixel for 18 bucks, I think it might work because I diagnosed the problem before.
@troytaylor1913
@troytaylor1913 28 дней назад
I'm not a camera tech. I'm an electronics engineering technician. The newer cameras are easier to work on just like everything else. The goal is to make assembly faster with less labor. Less soldering, fewer failures. It just makes things easier to work on.
@KamenRider82
@KamenRider82 Год назад
Is equal processo for l810?
@user-qr4xb7im9y
@user-qr4xb7im9y 2 месяца назад
Hey, do you remember if this camera has something like a internal battery that keeps the settings memory? I have the same camera and recently, whenever I open the battery cover (e.g. to remove the memory card), all settings are reset and I have to set the date, time, time zone, etc. again.
@wendytrezise1277
@wendytrezise1277 2 месяца назад
8:42 can you still be able to attach the lcd ribbon if the white (small) flip lock top is lost? If so how? I have looked for a replacement with no luck.
@ezkwipezkwip4581
@ezkwipezkwip4581 Месяц назад
I have a L840 Coolpix that I have changed batteries and sd card with new. The camera is hardly used in nice shape but when you turn on within 4-5 seconds a message comes on the screen. Camera will shut down to prevent overheating. Even happens with external power supply. Any suggestions where to look
@letitiamariacretoiu641
@letitiamariacretoiu641 Месяц назад
Hi , so I have a question , my camera witch is a nikon coolpix b500 has sort of a problem with the power button, I think it gets stuck and when I try to turn on the camera it doesn't work and the lens dont come out but the button light is on , what should I do?
@badri13ful
@badri13ful 27 дней назад
I got b500 coolpix and suddenly my lens got stuck after zooming completely and it's dead like that is there any solution?
@craniusfawkes
@craniusfawkes 5 месяцев назад
I'd like some advices on how to solder those 2 boards together, since it is really hard to me and I cant find advices about soldering that way because it is really rare to find a project like that!
@babij-jn8qg
@babij-jn8qg 2 года назад
good explaination .
@Lee-haw
@Lee-haw Год назад
I just bought Nikon Coolpix L810, from used market, it's in a good condition and working well with batteries, but i want to connect a Dc power cable with an external power bank, or ac adapter. The problem is the socket is not common, can't find a connector for it, so i want to open the camera and replace the socket with a normal pin or mini usb.
@Theartofemman
@Theartofemman 7 месяцев назад
I opened mine l820 & tried the same thing but the camera stopped working
@Theartofemman
@Theartofemman 8 месяцев назад
Hello, please to where on the board did you connect the jumper wires together i didn't see it clearly, id be glad 😊
@michaelschmidt7415
@michaelschmidt7415 3 года назад
I just bought one of these used for a few bucks the other day. The battery door doesn't shut correctly because those clips are broke off. It works fine but do you have any idea where I could get a replacement part? The door works fine its the clips that the door connects too. Thanks for the video. Hope you have an answer for me.
@c.davidgraves4848
@c.davidgraves4848 3 года назад
Sorry, I do not have a solution. It is very frustrating. The battery door is so easily broken but there is no simple way to fix it.
@SewNome
@SewNome 2 года назад
I have the same problem. Did you manage to fix it?
@KamenRider82
@KamenRider82 Год назад
Tks
@Fuckjaim3
@Fuckjaim3 10 месяцев назад
I have a question are you able to change the lense
@blakout7752
@blakout7752 8 месяцев назад
Trying to know the same thing
@dmariewalker6880
@dmariewalker6880 5 месяцев назад
Not on mine
@JosueQC
@JosueQC 2 года назад
Great video!
@unumprovident101
@unumprovident101 2 года назад
I have the same camera and it fell tonight when I removed it from a tripod and the lens got bent
@ohgary
@ohgary 2 года назад
Old codgers refer to a tripod socket, not a “receptacle.” BTW it is the only non metric thread on the camera, being 1/4-20. I believe this is thanks to WW II, after which the camera factories in both Germany and Japan were destroyed and the surviving market was the U.S. Post war American cameras did not have a tripod socket at all, you could not sell such a camera in Japan, even a very inexpensive one, since Japanese dads always appear in family photos by using a tripod and a self timer. I think I was a grown man before I even encountered a metric fastener, so “quarter twenty” became the standard tripod socket.
@aguslovino402
@aguslovino402 2 года назад
Hello friend, I have a problem with this camera, when I press to take the photo it turns off completely, I turn it on again and everything works fine, but when I press to take the photo it turns off. I hope you have an answer for me
@c.davidgraves4848
@c.davidgraves4848 2 года назад
I do not know "the" answer. Does it die immediately or is there a delay. To trouble shoot, I would consider the possibility that the camera is drawing too much current when the photo button is pushed. I would turn "flash". There could be a short or something in that circuit.
@elzbietasowecka37
@elzbietasowecka37 Год назад
Wettyoyiiok24569
Далее
معركة من أجل العصيدة 👧ضد🪳
00:26
Nikon Coolpix P520 lens replacement or repair
14:04
Просмотров 74 тыс.
Coolpix Charging
2:34
Просмотров 433 тыс.
When A Gang Leader Confronted Muhammad Ali
11:43
Просмотров 7 млн
How does a VCR work?
15:00
Просмотров 5 млн
Nikon Coolpix  l820 external microphone modification
13:32
Nikon Coolpix Disassembly
17:41
Просмотров 8 тыс.
Nikon p510 Gps Lens error Fixing
10:02
Просмотров 20 тыс.