nissan titan oil cooler/warmer leak 

Thanks for uploading the video. I fixed my leak after I'd changed oil and filter. I replaced the seal without draining of oil just removed the filter only. I lost a half quart of oil that's all. I noticed that the old seal was in good shape but the bolt that holds the oil cooler was out of torque not tighten at all. Possibly all I needed was to re-torque the bolt at 36 ft-lb that may fix the leak. Oil pressure at idle is only 14 psi and at 2000 rpm is 43 psi that low.

Really nice video, I appreciate you posting this I’m just about to go do this job right now. Update: job went smooth thanks to your video. Cleaned up the area really well and looks good down there now. No leaks!

Awesome job. Worked great. No more leak. Thank You

Don't get Thomas started on what one of these is called 🤣 definitely a heat exchanger. Always satisfying cleaning up oil leaks 👍

Great video. Thanks so much. I’ll be doing this repair next oil change.

Huge help!!!

I love your videos, they allow me to learn tips and tricks about certain parts and cars as i work on them, I just started to work on other peoples cars, I'm currently working with someone who owns a Chrysler 300 and its a project thats for sure, keep up the great work!

Perfect repair Jonathan! It would have been nice if the owner would have brought you the correct amount of oil though lol.

Great job Jonathan! Sometimes those messy jobs can be really therapeutic! Unless it's winter and you're out on the driveway freezing your ass off 👍😂

Nicely done and clean. 👍 I think most oil coolers up here are oil warmers in the winter as the coolant sure get hot faster than the engine oil ever does. Cheers

Nice detailed work. I think a lot of people overlook the importance of cleaning.

Thanks! I have an oil leak on my Titan and I suspect it's coming from this part.

Nice editing 👍

Thanks

Use some grease to hold it in place oil ring is over sized.

I just replaced an oil cooler on my 1999 E150 Econoline Explorer Limited Camper Van. I thought I would mention for those reading these and watching this video.. that I did not see a single drop leaking after I changed the oil cooler for three days.. not a drop but the fourth day... it started to leak.. so I am about to remove the cooler and check it and put it back on it is leaking from the top of the cooler where the gasket it.. the gasket / O Ring on this one is attached.. so it may be it just needs to be a little tighter.. I will see soon.

Awesome video nic.

Ive heard these titan's are known to mix oil an coolant once the oil cooler goes bad 🧐🧐

i replaced my oil coolant seal today and noticed a factory defect on my 07 titan when try to tighten the housing with the seal on it to the motor there was a bur which was not allowing the housing to properly seat causing it to leak just a little light file job fixed it nomore oil leak

So the part for sale at autozone and orallys is not the proper one???????????

What are you using to clean the areas ? And what would you recommend for a good engine wash ?

I wonder if you can just re-torque the nut without removing the assembly as the o-gasket always seems to be intact

I noticed oil leaking on my 2007 Nissan Armada but it seems like it doesn’t leak much … could it be that it’s just starting to leak?

My o ring was tight almost hard to get on

Bro do you torque everything

For an 04 armada, I put a new filter but keeps leaking, would it be another faulty filter?

Is this big o-ring or the small gasket? or do you happen to know the size of that gasket is?

Waiting for ppl debating whether or not you should use tools to tighten filter or else it'll fall out ...

What size socket did you use?

How much was the o ring

Hoses have oil in them not antifreeze

So the part for sale at autozone and orallys is not the proper one???????????