Could you please explain the oillevel control again in detail for everyone? The filling level is said to be particularly important and many have also asked in other videos. Best regards
i have nissan xtrail 2014 petrol 2.0. i just drained oil without changing filter and added 4l ns3. should i must need to level check? i cant because i havent the tool lol. or is it ok just with 4l oil? i can remove oil from top with medical syreng. if i need minus how many ml i need to remove.? pls help.
Highly appreciated with this video, very good information, one question , in end of the video, what kind function for remove 14 mm bolt to remove oil through slowly ? Its mandatory or just option?
You have to open the 14mm .He poured in 4 qts. Full is 3.5qts. With the car running and warmed up a little you open it up and it will chug out a little and then a thin stream. It basically self levels.Then you put it back in
What is temperature of transmission when you drain from overflow bolt? Why no change of filter in transmission pan? Should the fluid change not be done twice as per Nissan spec?
With out removing the oil fan you need only 4 liters,if you remove the oil fan you need 6 liters then level it while the engine is running if you have scan tool check the oil temp to 45 degree before checking the level if no scan tool warm up the engine 10 to 15 minutes then check the level...
@@kasagpi thank you for the reply. However I saw in the video that you drained the CVTF + replacing the filter but you just poured a gallon (4 liters) of the NS-3?
And there’s another filter when you drop the pan. Make sure you get the correct one. I learned there’s two different sizes, which sucks because both sizes look identical LOL Basically a size for the 18 bolt pan and a size for the 19 bolt pan lol
