No Binding PotHolders|Struggle With Sewing Binding No More |Easy Tutorial|Christmas Remnant Sewing 

I can’t believe l just finished making 116 pot holders with bindings..shoot me now..🇨🇦

Nice! I use pinking shears to trim my edges, that helps with the curves

there used to be a metal template for those corners. You just press it over the template and you are ready to sew it. Great video TFS!

I think I’d make a thin cardboard (think comic book boards) to make a template for my front feature fabric. You would put it down on the wrong side of the fabric and then press your edges over it. Take the cardboard out and give your fabric a final press and any clipping of the corners.

I love this design! Thanks for the video and the great idea. I hate sewing on binding. Still have an unfinished quilt that was supposed to be for my baby granddaughter (who is now 14) because I couldn't do the binding! 😢 This is a lifesaver. I'm going to make some of these for Christmas gifts. ❤🧵🪡

I too hate binding. Thank you for showing this method. I’m going to try it!

Hello SLC, I'm not a fan of putting binding on such a small project and your technique is genius. t'hanks for the detailed video/tutorial because your verbal and visual instruction is a a good pace and well detailed. Nice job.

Thank you for such a great video and not “wasting our time” having to watch you stitch and iron every step of the way! You included just enough details for us to follow your process! :)

I enjoyed making this pattern very much. It was different and my potholders turned out very nice.

I think its very cute but for those of us who dont srw a lot, a complete video would have been appreciated.❤

Thank you for not showing steps we crafters already know. Time is precious and I really appreciate it. Just discovered you today. ❤

FABULOUS method! Thank you so much. I avoid binding at all cost!

Genius! I hate using binding, this is an easy way to make. Mahalo for showing us how! 🤙

Thank you! Just in time to make casserole pot holders! GREAT TUTORIAL!

What a good idea for a framed potholder without the wonky binding. Such a more polished look. Yes, it takes one more srap of fabric , but the results are worth it. Thanks for teaching this old seamstress a new stitch!

Love this tutorial! Thank you…I hate binding.

Love this new way of making potholders💕 Binding is soooo tricky and this finish looks like binding! Very clever. Thank you for sharing!

Great technique. I made one pot holder and only one because I hate sewing on binding.

I love your method, I’ve never seen that before. Do you ever do quilting stitches on your potholders?

Clever.

Love this!

These are great. Thank you. Binding has had me cursing loudly!

I love it!! Looks so good and professional!! I needed this yesterday.😂 I put binding on several homemade hot pads. 😩 I’m now going to only do it this way now! I would love to see more videos from you❤

Brilliant!

Clever, I'm going to try this.

Good idea! I struggle with the binding most times so this is a good way to sew them. Thank you!

Awesome idea!

I love this idea!

adorable!

That is so clever!

Love it

Super cute!

Super design!

I love new ideas! Thanks!

Great idea! Thanks for sharing!

Excellent idea.

Great idea

AWESOME 👏🏻

Fabulous way of making these. Thank you so much for posting this.

Super Cute! Thank you for the lesson.

Fabulous idea ❤

Awesome

Sweet!

Amazing! Definitely gonna try this. Thank you

super cute!

Wow!!! Marvelous! Christmas presents, here I come!!!

That is so clever, thanks for this.

Thanks looks great

Great video!

So cute! Thanks for the great technique. ❤

Yes looks good, Thank you for the instruction. 😊

Nice video. I always enjoy seeing others ideas on how to solve a problem and come up with a new way of doing something. I thought you explained it all very well.

Beautiful work

Thank you! Great tutorial. I can’t wait to make some. I will add a quilting design to them. ❤❤❤❤

I don't mind binding but time is an issue. I also use 2 layers and the shiny side does go to the outer fabric because that's the side to reflect out the heat. If you are making a cozy for a cold drink bottle, put the shiny side to the outside so the cold stays colder with the fleece, (fleece absorbs) between and the shiny side reflects the cold to stay inside, insulated. Only one layer needed there. A potholder needs 2 layers so either side works to reflect the heat, even away from the table source as a hot pad or trivet or hands. As soon as it hits the shiny surface it reflects back, keeping the hot source like a pot or dish hot and not the table top or counter. Hope this makes sense. Amazing job on your bindless potholders. You can also fold one layer, would be an extra red layer with yours, to put a pocket for the hand on the back. One layer to your Christmas fabric and one in the folded half so the oven racks don't burn if you're pan is on the second shelf. Just some ideas... Thanks again, you've blessed my friends, family and volunteers too with this video. I've been making potholders as thank you gifts with binding... You've just saved me alot of time. Babs near Tombstone AZ

Love this video! Thank you!!!

It looks perfect, great project

Great project, very well explained. Thanks!

Thank you for this. I don’t do well with binding. I plan to make some soon.

I love this! So much easier!❤

Genius!

So clever! And a great tutorial. Thanks!

Great video I love the no binding technique!

Great video

Wow great idea. I’ll go for it.. thanks 😊

I'm soooo glad I watched your tutorial today!!❤ I'm going to make a lot of these potholes and put them together with some kitchen tools or goodies for Christmas gifts. THANK YOU !😍

❤ Very Good! They look like they have been binded. 👏👍

I make potholders by putting the two sides facing each other, sewing all around-almost, turning them to right side and sewing a decorative stitich all around about a half or 3/4 inch away from the edge. I don't make them as big anymore. They're easier to use when they are about 7 X 7 inches.

Love this, thank you!!! xo

Excellent video

Nice, I like this one, going to make.

Love it going to make me one

It’s so neat and professional ❤

Thanks for this!

Super cool tutorial! Wonderful new to me way to make potholders!

Awesome job👏👏👏👏👏👏👏😊👏

This is such a cute video thank you!

Thanks for this Chrystal, great technique to save the time and money needed to make and add binding, thanks!

Pretty awesome! I think I will try this method ❤

Great!!!😊🎉❤

Love this idea thank you xx

Thank you so much! 😊I'm a beginner and wanted a pattern that would be easy for me to get to know my machine and not waste my nice material. The potholder seems a perfect match for that but the binding around the edge was keeping me from trying it. This technique makes it such an easy substitute for that. Thanks again. 💖🪡🧵

Great video. I can't wait to make potholders this, so easier and looks great.

Interesting technique

Wow, you really have a great talent for this. I couldn’t conceptualize it at first. Great job. Thanks for sharing ❤

Great tutorial! Thank you for this easy demonstration.

Awesome ❤❤❤

Great idea! I think I will use a decorative stitch.

Interesting technique. I’ll try it. Thank you for sharing.

very clever way to finish these, thank you

So much easier and looks great😀

I love your technique! I will be making pot holders this Christmas!!!

Thank you thank you!

Great video!! Thank you for sharing

Very clever design! Love your fabric choices. Thanks for the excellent tutorial!

I love it! Best tip I've seen in a while. 😊

Super cute! I haven't sewn in 35 yearsbut im gathering an arsenal of great tips for the day i take it back up!

Thank you for this! I don't like making potholders because of binding. I like your way!

What terrific way to make potholders , I hate binding , I can pin , baste the binding & it will be a mess ! Gotta try this !

Thank you!!!