Тёмный

No Stitch Leather Koozies, Lasers, Cricut or Hand Cut Patterns - With the Xtool P2 Laser 

This Is How I Made It
Подписаться 17 тыс.
Просмотров 6 тыс.
50% 1

Hello everyone! Magic Koozies. Or "Mathic" Koozies. No-Stitch tho - for sure! I use Fusion 360 and a parametric model, that allows me to do some really crazy things, like generating these no-stitch patterns! All the patterns are available on my Etsy shop, link below!
Special thanks to Xtool for sending me a new P2 cO2 Laser to test! They gave me no restrictions or approval requirements on the unit, so all opinions are my own. I do like the system, and the software. Look forward to working with it more in the future! If you are interested in this laser, here is a link for a discount!
goaff.pro/rmdl...
For you Cricut people - here is a link to the video where I made an entire no-stitch leather purse on the Cricut Maker. Instructions are also in the Etsy file, but please watch this video if you are a Cricut user. Lots of tips and tricks!! • Cricut Made No-Stitch ...
If you are interested more in the designing process, please check out this list. In several videos I go in depth about my design, and later updating that design to a version 2: • No-Stitch
So what were my power settings?? Well - I will tell you, but also tell you that yours will likely be different. I engraved this leather at 600 speed, and 25 power. I cut at 30 to 36 speed, depending on how thick the leather was, and 75 to 80 power. But every type of leather is different. Even applying the finish beforehand makes it much more difficult to engrave or cut, so you will need to increase power and slow speed accordingly.
ETSY
If you would like the patterns for these, they are available on my Etsy shop here:
thisishowimade...
Use this code for the next two weeks for 30% off the koozies. IWATCHEDTHEVIDEO - ore use this link: thisishowimade...?coupon=IWATCHEDTHEVIDEO
Here are links to everything I use in the video!
Nano Water Sprayers
amzn.to/44aqt1V
amzn.to/3QCYiWn
Money Clip Hardware for this design
amzn.to/47rFhMq
Tokenole
amzn.to/44eYzBX
Burnishing Tool
amzn.to/44rTSoF
Fiebings Pro Leather Dye Red
amzn.to/47t6crn
Fiebings Pro Leather Dye Various Colors
amzn.to/3DWvWic
Fiebings Pro Leather Dye Yellow
amzn.to/3OXpe0H
Barge Contact Cement
amzn.to/4565zlQ
Music by: Bensound
License code: FZYXS8EL7VREM2LQ
License code: OIUQ85D8Y2LZH0LY
License code: ZAEY84OVGO2J5T8F
License code: QF3YFTMEKBSOIQAF

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 53   
@suehenderson9862
@suehenderson9862 Год назад
These are sweet! I really like your sense of style and workmanship.
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Thank you very much!
@totalitarac
@totalitarac 5 месяцев назад
❤Omg I have two cricuts, I do a lot of things, but this is crazy, congratulations, I started making leather bags, but when I saw this, I went crazy 😂
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt 5 месяцев назад
It’s a lot of fun on the Cricut. I need to experiment with HTV and leather too
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt 5 месяцев назад
And if you like this, go back to the first Cricut made purse video of mine and check out the drawing on leather…
@lovinglife3675
@lovinglife3675 4 месяца назад
Thank you so much ! great tutorial and demo … liked it so much i bought the soda pattern as a trial run … kind regards 🙏
@billcs66
@billcs66 26 дней назад
Thank you for the video, you gave me some great ideas.
@cassandraknight6485
@cassandraknight6485 Год назад
What a great project!
@Jwalk195960
@Jwalk195960 3 месяца назад
I'm sorry if I said something wrong. I did buy your pattern for your Kookie holders. Thank you.
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt 3 месяца назад
Just traveling :)
@Jwalk195960
@Jwalk195960 3 месяца назад
Thank you very much. I'm sorry for bothering you. I believe I got it figured out. I'm the guy that lives in NE. Thanks
@ashleytemples6183
@ashleytemples6183 9 месяцев назад
I stumbled across your etsy listing for these. I'm quite intrigued but was wondering your thoughts on using leatherette. I enjoy the 2 tone options (black/silver, brown/silver, etc)
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt 9 месяцев назад
Leatherette should work fine! Let me know!!
@josiedoss3140
@josiedoss3140 Год назад
Great video! Thanks
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Glad you liked it!
@jenkins1979
@jenkins1979 9 месяцев назад
What app do you use to design with and how much do they charge...thank you for sharing ,loved your video
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt 9 месяцев назад
I use fusion 360 and then run the exports through affinity designer. Affinity Designer is about (was?) $50 for a lifetime license
@digitalman269
@digitalman269 Год назад
Just purchased the 5 pack (so I can use them for a 6 pack - LOL). Problem for me now is that my Snapmaker wants to resize the Pint Cuff when importing. If I import the Pint Cuff into LightBurn, it looks small. Is there a guide or scale so I know before I burn?
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Measurements for every panel are in the document. I believe lightburn wants SVG files to be 96 DPI, and these are 72 to be compatible with other programs like Cricut design space. Just look at the pdf that is in the main directory of the zip file. All the exact dimensions are in there, and also down in the product description on Etsy.
@digitalman269
@digitalman269 Год назад
​@@ThisIsHowIMadeIt If I import the .pdf version into Lightburn, then I get the measurements in your documentation (absolute outside area needed). I will try those instead of the .svg files since I can not find a way to change the dpi during import into LB, or doing an export from Adobe Illustrator. Thank you again.
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
@@digitalman269 you don’t have to change the dpi, you just need to resize either the x or y size with the size locked according to the size in the doc….
@evangelineboyles4784
@evangelineboyles4784 Год назад
Are you listing them all individually rather than offering a group?
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Yeah. I when I do a set like this, I list them individually for fairly cheap, and then offer all of them for about half off in a pack…
@evangelineboyles4784
@evangelineboyles4784 Год назад
@@ThisIsHowIMadeIt I found the set listing after I asked you about it. Thanks
@riaingardner9892
@riaingardner9892 2 месяца назад
The official term is "Snarf". Seriously, look it up lol
@efrenmoreno7706
@efrenmoreno7706 13 дней назад
Well you have to buy cheap leather people don't want to pay
@carolchatmon9433
@carolchatmon9433 5 месяцев назад
What do you think of the we creat diode laser? If you can offer an opinion
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt 5 месяцев назад
Check out my latest video :)
@deirdreamacias4636
@deirdreamacias4636 Месяц назад
Absolutely love these. Already have the bundle in my cart. As a (hopeful) possibility...a beer bottle? I know many people who will only drink out of a bottle.
@FredSchmitthammer
@FredSchmitthammer 5 месяцев назад
It would be great to have a video that different leather types and where to source them. I want to start with the purses and wallets. I need to know laser safe, which can be dyed, and other qualities we should look for.
@dangoras9152
@dangoras9152 Год назад
That's a cool project.. Those would be cool too make bigger for planting pots to spice them up.. Keep it up brother....
@joypatrick8057
@joypatrick8057 8 месяцев назад
I made a cuff I modified for a mason jar. It's not quite the right size, it's a bit tight, but the tabs are perfect!
@dvn711
@dvn711 Год назад
Can we purchase the fusion files from you too?
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
I don’t. My fusion files work, but a lot of things aren’t fully parametric. So when I change a few things, I’m often forced to go back through the model and adjust patterns and things. Definitely not for public consumption :)
@dvn711
@dvn711 Год назад
@@ThisIsHowIMadeIt understandable. If you’d ever want a second set of eyes to get things fully parametric, I’d be happy to help.
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Nice! Pattern on path is the biggest offender. If I use parameters to drive the number of tabs, the model breaks if there are more objects…. Makes sense, but that’s one example.
@evagreen1184
@evagreen1184 Год назад
What a great video! I love your no sew products and can’t wait to try this out. I was unsuccessful at trying to engrave stainless steel tumblers so my goal is to make leather sleeves for them instead! :)
@mirisfern
@mirisfern Год назад
What a great idea, I'll definitely try to make it. Tha ks for sharing 😊
@dennissutton2701
@dennissutton2701 Год назад
Very nice, I just picked up your files on Etsy. Any advice on leather thickness for pint glasses to give an "old school" feel?
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
I think 4 to 5 oz is the sweet spot to feel like quality…. Tho I do like the 2 oz 1mm versions I made a lot
@fjohns0812
@fjohns0812 Год назад
Another outstanding project. I just downloader the pack. It seems like I am buying everything you put out lately. Thank you for what you do!
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Thank you!
@dian3145
@dian3145 Год назад
I really enjoy your presentation style! So clear and concise, no waste. I think this is the first time I have seen a laser used with the blades! I will have to try that for my larger pieces. Hate the flashback. I don’t see this as a part of my product assortment, but will be an amazing gift for family and friends…definitely unique.
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Thanks!
@flakk1989
@flakk1989 Год назад
Something kind of different, at least for me. Nicely done!
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Thanks!!
@derekcavan6000
@derekcavan6000 Год назад
Very clever! I would be interested in getting one for standard beer bottles (budweiser/heineken for example), rather than cans. Can you oblige please?
@alishagelman9920
@alishagelman9920 Год назад
I should have watched this before I paid full price 😅
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Oh no! Let me find you on Etsy!
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt Год назад
Sent you the discount back…. Cheers! Hope you like it.
@belindamason8286
@belindamason8286 Год назад
This is genius!!! Fantastic 😍😍
@robbfoster9543
@robbfoster9543 11 месяцев назад
Very cool!
@ThisIsHowIMadeIt
@ThisIsHowIMadeIt 11 месяцев назад
Thanks Robb!!
Далее
No-Sew Leather Purse Set, Laser and Cricut Maker
13:18
Меня Забанили в Steam CS2 / PUBG
19:19
Просмотров 194 тыс.
Laser Mistakes & How the xTool P2 Fixes Them
19:18
Просмотров 13 тыс.
Cricut Made No-Stitch Leather Purse
13:35
Просмотров 15 тыс.
Leather projects with laser engravers-xTool P2
30:31
Просмотров 4,1 тыс.
No-Sew Leather Totes for the Laser or Cricut!
27:32
Просмотров 4 тыс.
TWO New Stitches to Elevate your Leathercraft!
23:11
Просмотров 588 тыс.
25 Products That Let Me Quit My Full-Time Job
8:29