Тёмный

No Talk, Just Wrenching - Swapping Transmissions on a B18 CRX - Let's hope it works! ASR 6/8/24 

Garage Built Hondas
Подписаться 95 тыс.
Просмотров 1,9 тыс.
50% 1

Find all the Jackspania parts here!
linktr.ee/gara...
Jackspania 10% off code - GarageBuiltHondas
jackspaniaraci...
PCI LCAs - jhpusa.com/pro...
PCI Compliance bushings - jhpusa.com/pro...
Exhaust - amzn.to/3lEU2bG
Front Lip - amzn.to/3JNwSJy
Taillights - amzn.to/3Fz6e4E
Headlight Set - amzn.to/3yMUHuz
Maxpeedingrods - 10% off code GBH
www.maxpeeding...
Advan Wheels - jhpusa.com/pro...
My Favorite Products
Wheel Bearing Tool - amzn.to/33IplZZ
Milwaukee Ratchet -amzn.to/3EtpNJp
Jack Stands - amzn.to/3lvA5A2
Cameras used in this video
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFF
Decals available for purchase here - garagebuilthon...
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ garagebuilthondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support!

Опубликовано:

 

24 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@soundboydesign1373
@soundboydesign1373 3 месяца назад
Best line..."...before lunch..." lolol...big up lads
@TONI5-25
@TONI5-25 3 месяца назад
Nothing better than building Hondas.
@novathao5322
@novathao5322 3 месяца назад
That b18 was screaming!!💯
@GarageBuiltHondas
@GarageBuiltHondas 3 месяца назад
It's solid and fun to drive!
@CesarsCarCorner
@CesarsCarCorner 2 месяца назад
Check the dentent spring in the transmission. Those usually wear out and cause popping. $20-$30 fix; if it still happens, you have synchro issues.
@drmstudio5050
@drmstudio5050 3 месяца назад
Sweet!
@mcef9117
@mcef9117 3 месяца назад
Kicking some more honda butt! Awesome
@throughmyeyesmedia6492
@throughmyeyesmedia6492 3 месяца назад
Some Wrench time is always fun. 💪🏽
@GarageBuiltHondas
@GarageBuiltHondas 3 месяца назад
Always!
@TheVas1968
@TheVas1968 3 месяца назад
GRASIAS [POR CONPARETIR
@Givelasagna
@Givelasagna 3 месяца назад
Isn't pop out caused by a worn pilot bearing or synchros? That wouldn't be hard to repair. you'd just have to tear into the transmission
@GarageBuiltHondas
@GarageBuiltHondas 3 месяца назад
Usually. He's going to have it completely rebuilt and then probably the same with the new one
@SlowDelSol
@SlowDelSol 3 месяца назад
@@GarageBuiltHondasI’m about to order a rebuild kit for my S20 B000. I think I’m going with the Syncrotech kit at $500 do you think that’s the best option? Anything else I should consider or know?
@Busydadgarage717
@Busydadgarage717 3 месяца назад
The sycro kits with the bearings are a great option. Replacing the bearings is a good choice if in there. I have a bad input shaft bearing in my YS1. The thing to note on that is there is shaft tolerance specification. Check the width of your old bearings vs new. If same, no issue. If different, take to a machine shop or trans shop to have them check the tolerance.
@accordingtokevin7501
@accordingtokevin7501 3 месяца назад
Where is this track?
@GarageBuiltHondas
@GarageBuiltHondas 3 месяца назад
www.racingcircuits.info/north-america/usa/arroyo-seco.html
@scarlettohara2609
@scarlettohara2609 3 месяца назад
Would you, or anyone you know, be interested in buying a 99 Teggy?
@GarageBuiltHondas
@GarageBuiltHondas 3 месяца назад
What's the deal with it?
@scarlettohara2609
@scarlettohara2609 3 месяца назад
@@GarageBuiltHondas LS, Auto, needs lots of work under the hood, hasn't run since '09. I'm in EPT.
@GarageBuiltHondas
@GarageBuiltHondas 3 месяца назад
How much do you want for it?
@scarlettohara2609
@scarlettohara2609 3 месяца назад
Uncertain on price. I'd rather you check it out first. Got lots of potential, but it's been through a lot. Are you free sometime next week to check it out?
Далее
The joker favorite#joker  #shorts
00:15
Просмотров 23 млн
Истории с сестрой (Сборник)
38:16
Honda CRX Build in 20 Minutes
20:01
Просмотров 18 тыс.
We make a custom duralumin crankshaft for a Lada
15:02
Просмотров 294 тыс.
Why you should NEVER brake while hitting a pothole
22:33
We Drove Every Honda!
24:52
Просмотров 133 тыс.
K Swapping My Honda Civic - Episode 2
16:25
Просмотров 1,7 млн