NO WELD Container Cabin Window Frames| I Wish They Would Have TOLD ME THIS | Bear Bottom Acres

Подписаться 3,1 тыс.

Просмотров 113 тыс.

50% 1

Check out these ZERO WELD tips we learned for cutting and framing windows and doors for our shipping container cabin. You don't need a plasma cutter or welding supplies and advanced building knowledge to carry off this project. Don't you hate it when you go onto RU-vid to learn a new skill and they gloss over some important steps? We do too. That's why were sharing with you what we've learned AFTER doing the project, so you can make better choices for your container cabin build. No welding required. You can do this with a wood frame, an angle grinder and other basic tools. No metal frame needed. Easy for the inexperienced builder and can be done with two people.
These tips and tricks for your do it yourself shipping container cabin build project will save you so many headaches and save you time. A must watch before you start your own step by step build project. This no weld, wood frame method is more inexpensive than other methods and beginning builders, amateur builders and do it yourself weekend warriors can do this! A great idea for homesteaders, hunters or anyone starting with raw land. Can be used as a DIY hunting cabin. A great land to homestead project. Shelter is a must have. Watch our entire shipping container cabin conversion project for more hot tips and building hacks. Do it yourself!
Subscribe to our channel and hit the bell to be notified about when our latest video is released.
You can follow us:
Instagram: / bearbottoma. .
Facebook: / bearbottomac. .
Website: www.bearbottomacres.com/

Хобби

Опубликовано:

4 ноя 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@rayhill1855 Год назад

Dude I just run a 2x6 border flat inside and out bolted together caulked the hell out of it. Next i ripped a 1x6 to fit for a jam and just hung the window and door as normal. Been a carpenter for 45 years. I did two doors and two windows on two containers in a day. and I'm 68 years old. I did buy a metal blade for my 40-year-old Skilsaw and it cut like butter.

@zengirl43 3 года назад

Love your video. What not to do is so so important. Thank you.

@curtwarkentin2887 Год назад

At my farm one of the very first things we purchased after our seacan was a riding mower to maintain the area we relax in. Second purchase was a generator. Our seacan came with an A/C installed since our summers can get hot and winters are brutally cold. We bought a generator that is big enough to run a few heaters or our ac. I'm a carpenter by trade so already have tons of tools. The generator allows me to run any tools I need to use plus keeps us comfortable during bad weather.

@America12412 3 года назад

Thanks yall !! Also.. the end of the video cracks me up

@pauljames9056 5 месяцев назад

Thanks, you for sharing your experiences.!!!

@BroadcastYR 6 месяцев назад

You have got to be loving a HONEST debrief. Love it, subscribed !

@HamiltonvilleFarm 4 года назад

This is an excellent video for people needing to know do's and dont's when building a container. Well done.

@BearBottomAcres 4 года назад

Hamiltonville Farm thanks Hank! Heather and I really appreciate your support!~Kevin

@jflow5601 4 года назад

Great advice. Some day I will get the courage to go out and build a container home in the hills. Hope I will be lucky enough to get a neighbor such as yourself.

@binoybcompany2012 3 года назад

I just saw that video just before I came across your's & bro u had saved me with this seriously, I was thinking of the same idea & it would have been a nightmare. Thanks buddy

@grannybee6805 4 года назад

You are proving that people can always find a way to get things done. Trial and error, but keep at it. You are doing a good job.

@BearBottomAcres 4 года назад

granny bee is there any other way then trial and error when you are a weekend warrior?😜. Thanks always for you support. ~Kevin

@BrewCityGardener 4 года назад

Ha! Great tips here. It sucks to learn the hard way but glad you're sharing your experience. Thanks!

@BearBottomAcres 4 года назад

I really believe the value of our channel will be to not act like an expert but instead be honest about what you would do differently. ~Kevin

@ogdad6664 3 месяца назад

Thanks bro! So helpful!!😊

@rjoetting7594 7 месяцев назад

I've watched a couple of videos and they used a sawzall, of course with metal cutting blades and it appeared to work quite well. I just got a 20' shipping container I'm going to use to store and work on my Harleys. I'm not putting in windows, but I will install a couple of vents with a fan and a door, and possibly a small 110 air-conditioner. (Portable heating to) I've also purchased 2x4s for framing the interior and insulation. Hope to be done next month.

@jackvillan5151 3 года назад

Caulking spatulas my friend, the right tool for the right job sorta thing

@adamlux8245 3 года назад

I used a 20 Volt Worx Drill and drilled 1/2” holes (3/16 pilot) in the 4 corners 5 minutes and then a 20 Volt Worx Recip to cut a 36” x 36” Window with 1 shared battery and 2 blades in 5 minutes also. I tried a Grinder for my solar vent hole and back to that skinny blade Recip.

@Citystead 4 года назад

Nothing is more manly smelling that metal and fire! Loving this seties on the build, so much great information packed into these videos. Yeah the metal frame looked tiresome to build.

@BearBottomAcres 4 года назад

He was literally covered with metal! I'd be too intimated to do metal work. ~Heather

@TheNakidGardeners 4 года назад

Oh, there are many ways to skin a cat. When I was building and remodeling cold storage facilities, we would trim that with metal for the industrial look. Just have the metal guy form it. Great learning and information. Thanks for sharing.

@BearBottomAcres 4 года назад

Thanks. I'm glad you liked it.

@williamforsythe5850 4 года назад

I had exactly the same problem with my grinding, that corton steel is insane. Apparently using a sawzall or jigsaw with a metal cutting bit will make it SO fast. Took me 2 hours to cut out my vent hole with my angle grinder and it looked terrible. Then went to cut another hole and used a sawzall and it took me 10 mins. >.< The trick for straight lines on the container walls is a piece of thick poster board or cardboard. It conforms to the corrugation without losing it's straight edge. GL with your build. If I had to do mine again I would have skipped windows altogether as they are a pita and just break the wind and water tightness of the building.

@justinkatipa9577 Год назад

My hilti 2000w grinder chewed through the container walls

@galecooney2337 3 года назад

Generator for charger n straight edge cardbord for lines

@williamhigdon8728 5 месяцев назад

There's a guy in Canada that makes a nice inexpressive window frame

@HoustonR6ryda 3 года назад

GOOD LUCK.

@brianswelding 2 года назад

They make these amazing new things called a generator. 🤯🤯🤯

@21lindarae 3 года назад

Where’s your container located? Great video

@FernandoRamirez-yi6kr 4 года назад

Are u making a tips video on insulating?

@BearBottomAcres 4 года назад

Fernando Ramirez we will be might it might have to be next year. Our hard drive physically crashed and we lost some footage. I know it sucks. We probably need to do a video on backing up your data which is the project I am working on now.

@jesseguzik 2 года назад

Thank you Kevin. I had watched the same video and have had the same concerns, which unfortunately you lived out! Learning from you though as I plan my build. I am also in MN, a little north of the twin cities. Have you see any good resources or tutorials in regards to attaching a wood frame in a quality manner while making sure it's water and air tight without adding siding to the container afterwards? Thanks again for the great video.

@BearBottomAcres 2 года назад

You don’t need to attach a wood frame to the container. You screw in to the floor then everything gets pounded and wedged in as you go and screw it together so it becomes solid. As far as water and air tight you need to think about heating and cooling. I bought a combo unit and it’s exhaust fits in the window nicely but the air intake is within the room which is small. You open the window and it whistles until you open it far enough. I might make a path from the garage area to the living area to pull air from. Other wise on really cold nights it doesn’t heat up fast enough because of opening the window. I would put some type of roof on it because the windows and door are not made to have water sit on top there usually some type of over hang.

@jesseguzik 2 года назад

@@BearBottomAcres Thanks Kevin. I’ll keep building prototypes in CAD and researching until I’m ready to start buying everything and cutting holes! I appreciate the help and input.

@AlmostHomestead 4 года назад

I'm really enjoying this series as we are considering a container cabin build in the future. Appreciate the information. You smell like metal and fire. Haha!

@BearBottomAcres 4 года назад

Thanks. The cost is so much cheaper than with a trailer and you get to smell like fire!! ~Heather

@AlmostHomestead 4 года назад

@@BearBottomAcres 😁

@usmcoth 3 года назад

I found that using the sawzall went really fast and kept my battery life WAY UP. Containers arrive in all kinds of conditions. We spent a lot of money doing laser leveling on our peers only to find that the container wasn't straight, square nor level.

@obfuscated3090 Год назад

Most containers sold are removed from cargo service because of damage especially corrosion and bad end door gaskets. I warn others against buying them for anything but workshop or rough storage use. For a residence or nicer workshop a "one trip" grade is vastly better but harder to find and more expensive. I made the mistake of using two "Wind and Water Tight" grade shitboxes. Never again and the next two are nice clean 40' High Cubes with doors on both ends. My foundation is steel beams (used of course) so the whole structure will remain easy to jack and shim if it ever shifted which is unlikely. I use recip saws, an OA torch and one of my favorites, 6" thin kerf abrasive cutting disks on an angle grinder. Any local welding supply carries them and I buy by the box. They'll cut steel plate and I've sliced the end off a truck axle (not the housing, the axle which is forged) with them.

@ourselfreliantlife 4 года назад

Great lessons looking back in hindsight. Tool batteries don't last long unfortunately. Besides, you should be using Milwaukee tools.😉👍

@BearBottomAcres 4 года назад

Green Dream Project You know I considered it but I just have this internal angst towards Wisconsin. Hate is too strong and dislike is not strong enough. I will shop at Menard’s because they are close but if I am dropping a couple of hundred or care about the quality of wood then I traveling to Hope Depot. I just hate 🦡 go Gophers! Ski U Mah. I don’t hate the people just their selective memory. You would think they joined the Union when Barry Alvarez became coach. Green Bay fans either remember before the NFL was formed or when The Minister of Defense came to town but they cannot remember when it was the battle of the Bays on who was worst in the league.

@Citystead 4 года назад

Team Dewalt!

@ryanb6658 Год назад

Ya but how does the wood frame attach?

@suzannedu419 3 года назад

thanks for the video. Great information. Wouldn't a reciprocating saw with a metal blade work better for cutting out the windows and doors

@BearBottomAcres 3 года назад

Suzanne Du4 it could be!?! I would have to try it out but any saw with the right blade is a consideration. But you want consistent and true. A small blade leads to inconsistencies. I would go with a big blade that makes a more consistent line.

@Bobbbybags 2 года назад

Dude you should’ve got the flexvolt grinder. You could’ve cut that in one shot without changing the battery.

@MountainCrestFarm 4 года назад

2:36 "More time OR more batteries." That...OR get a smallish (4KW or so) gas or propane (I prefer propane) generator for the heavy duty jobs that typically eat up batteries.

@BearBottomAcres 4 года назад

Mountain Crest Farm yeah I really really really wanted to upgrade to some Dewalt 20 volt max. So I stayed on the course so I didn’t feel guilty for buying myself some toys. Hoping I would get faster and more efficient. I did but not enough.

@rodwellard1890 3 года назад

Do you seal the roof

@BearBottomAcres 3 года назад

No we did not. We will have to do something because we did buy a container that has some dents in the roof but it is over the garage part. I am going to take a 4 X 4 and a hydraulic jack to pop them out. I do think that I am going to put some type of roof on it because when it rains it flows down on all sides so Getting in and out of the front door can be a little wet. I will probably weld on and then make a roof. We do also plan to do a complete paint job with a rubbery paint that acts as another layer of insulation.

@SimonRobertElder 10 месяцев назад

Thanks so much, but where is part 2?

@SimonRobertElder 10 месяцев назад

No worries, found it in a playlist in the end. (y)

@kumark214 10 месяцев назад

Why not use 2 by 4 steel tubes for the frame?

@BearBottomAcres 10 месяцев назад

You have to put it through a I am poor filter and low skill filter. We bought the land. That was 12k out of savings. Then we were not expecting to have to have a shelter solution as soon as we did. We were also buying a lot of other things that I never had before, atv, chainsaw, etc. Like many things you have to scale up. We are just now getting electricity. We put in a well, 100ft. By 200ft deer fence. Now Heather and I are further along in our careers and income so more decisions are invested in for long term more often. Some things we say this is good enough until we can permanently move there.

@fireofficer001 Год назад

You should’ve used a 24 inch cut off saw and then used to hand grinder to finish. Would do it in three minutes.

@tommyc.tommyslandscaping2244 Год назад

Where is the insulation video ?

@tacomafan7488 3 года назад

dont forget about gas generators !

@schrodingerscat8621 8 месяцев назад

How did you just learn that now? Cordless stuff is fine for a limited use. But when it comes to working all day long, you need to be plugged into an outlet. That was a naïve oversight. Whether it’s a power station, or a gas generator, remote work requires some kind of power source. Being at the mercy of the neighbor throwing a cord out his garage window is simply bad planning

@Screamingpinesfarm 4 года назад

Turning a container in to a house cost more then you think more then building out of wood. In MN they sweat on the inside do to are wheather, when done you will not see but will smell later (mold). I have remolded pole barns on 6 yrs old with spray foam and were molding on inside.

@BearBottomAcres 4 года назад

Wes where have you been buddy? Nice to see you back. We can see the difference with sweating from the insulated side to the non. We will see how it goes. I like that we got it partially done this year so we can see if there are any opportunities to improve before putting in dry wall. Also we are going to be putting on a roof and other things to reduce the heat induction and reduce the chances of sweating. If it turns out to be a disaster as you are foreshadowing then there will be value in sharing that with folks also. I agree that if you get more than one shipping container and then weld them together and add steel beams for strength then you are just doing it because you like the shipping container aesthetic. It is not cost effective per square foot. For our application, what we need and are using it for we made the best choice. When we move to the land full time then we will build a farm sheik palace of a pole barn on roids.🤪 Love to see your comments again sir!

@MrCanman84 3 года назад

Do you recommend spray foam for a shipping container or some other insulation?

@theinterfaithshepherd9075 Год назад

My friend, you didn't show how to install the door! :)

@ambman6270 3 года назад

Should have used the grinder to cut the metal

@sam-ww1wk Месяц назад

Battery 5" grinder??? You can buy a generator and a 6/7" grinder for the price of those batteries. Batt angle grinders, and 5" or for tiny jobs. Very handy for 80% of stuff. But any real work, you need 110 and big disk.

@NiceAussie Год назад

5 amp not 5 milliamp

@barryhall4977 3 года назад

Plasma cutter ..dual voltage and a generator!!!!!!!

@nicklucero-fear.trembling45 3 месяца назад

Gas generator

@zioncanyons3011 2 года назад

Just show me. This is video.

@scottballin3798 Год назад

2 trademarks of a finnish carpenter and 2 trademarks of an irish carpenter..... a good journeyman carpenter NEVER uses a mitre joint on external window trim as this creates a suck hole for moisture / rain..... always use a butt joint for increased weather resistance.... the other thing that sucks to see is all the people who dont do a plumb cut on rafter ends____ Please.... for Chrise sake, take pride in your work and do it right the 1st time

@chocachips 3 года назад

9" angle grinder on a generater that'll get the whole cut out and put the fear of God into you.

@BearBottomAcres 3 года назад

At the start we were working within a tight budget on borrowed money. I feel guilty buying stuff for myself, but I always wanted to get Dewalt tools and we didn't feel like we had the money for a generator right away. I also was a little scared of having a cord attached while up on a ladder. But in hindsight you are completely correct.

@fastway007 Год назад

🤦‍♂️

@kevinashby3784 3 года назад

You spend most of the video telling us what you learned the hard way as you pave never done this before. Just like those you mentioned in the beginning

@richardrowland7044 11 месяцев назад

10 minutes with a plasma cutter

@dedek222 10 месяцев назад

man du redest nur... solltest du bilder von der arbeit machen... !!!

@robertorojasjr6572 2 года назад

You talk too much and do not show the details on how you did the work....

@BearBottomAcres 2 года назад

Noted. Thank you for the feedback. A bottleneck we have is time. Time to do the project and film the details and balance time with the kids is difficult but again I do appreciate the feedback!