Nobody knows you can do this with a jigsaw. Hidden Features of Jigsaw 

This was really helpful!! The trick will be me remembering some of these tips the next time I grab the saw!!

The table jigsaw was great!

Great vid. thanks for not talking and getting right to the good stuff.

Great video! I learned a few new things today. Thank you.

Thank you very much. Didn't think of using a couple of these til i saw them in this video....

This was a really informative video, thank you for posting it. I can't wait to try out some of the things you showed here. Also thank you for not having loud and obnoxious music. You did each thing very easy to understand and to do.

Very useful collection of simple tips. Well done and thanks

The bandsaw hack is pretty neat.

That was better than I expected, lol!! Nice tips!

You missed an important one; How to start a cut in the middle of a board without a hole to insert the blade into.

Great tips! Thank you for sharing

Okay, that's a hell of a tip. I'm definitely going to be using that!

My jigsaw came with clear plastic inserts that snap in to prevent the wood splinters . You could even see through it for a few seconds. It’s a Bosch and very old . Has the black plastic piece to tighten the blade but I preferred the earlier model that required a screwdriver to change blades

One of the best tutorials I've seen on RU-vid with regard to any subject matter. Well done ! Can't wait to try some of these cuts.

Good stuff. Right to the point.

Useful ideas, thank you!

Very smart stuff. Thanks.

LOL. there is a lever on the side of the saw which helps prevent splintering that the makers put on. It restricts the vibration of the blade.

Table saw idea was fantastic 👌🏻🫡

Wow, that drill bit built into the saw is an amazing hidden feature

Outstanding! Thank you. New subscriber.

Great ideas 💡 appreciate the advice

Sweet!!! I'll remember this!!

Yes that breakout splintering does spoil the job. I will try masking tape on a sample piece of plywood tomorrow.

stanley's jigsaw and the dewalt's model have the same parents. even the color scheme. best one i've had....

Nice tips. Thank you for making & sharing your video. God[Bible] Bless.

Try a downcut blade .

Great! 👍 cool! 😎😎

I learned some new things thank you

thank you 😊

The umpteen-thousandth re-invention of the wheel ...

As a Master carpenter and Joiner O.N.C AND H.N.C now retired, I waited patiently to see what "Nobody Knows" I was not surprised not to see anything we have not known or used before. There are many ways to stop splintering and each pro has his favoured way. Also do realise folks although cutting a straight cut with a jigsaw is of course possible the machine is principally designed and made to cut curves, circles and shapes. Any "straight" cut is liable to wander and deviate, and of course the right blade for the right job is essential.

Wow!

Neat tip thanks

From a DIYer of many many years standing, it just goes to show that you can teach an old dog new tricks. Thanks.

すばらしい。凄い。

Excellent

Супер! 👍

Nice!

Hot damn. I’m learning.👍🇺🇸subbed.👍👍

Put styro-foam underneath and you can cut safely and easily anywhere. Started when I had to to do cursive lettering.😢 Works the same with a circular saw.

Does the tape trick work with router ?

Not putting your saw on the orbital setting will save you from a lot of tearout.

Ich finde diese Tipps und Tricks super!!! (...aber es gleich "versteckte Funktion" zu nennen, ist etwas übertrieben! Versteckte Funktion wäre, wenn man plötzlich zB tapezieren könnte😉)

The last one is my straight cut 😳

methods are definitely good for masking tape sales.......

Somebody does!

You do know the jigsaw comes with a zero clearance insert for just this reason…

Should have made a tiny push stick for the table saw'

Yea ..I knew that.

Need to use a foot pedal off/on switch just for safety.

Hey here’s an idea, use correct blade and not splinters.

What's the real difference between a jigsaw and a saber-saw?

The under table jigsaw seems a little dangerous.

Get a down cut blade?

NOBODY KNOWS THE TROUBLE I'VE SEEN

User manuals are handier than a forked stick.

Really, you start out with the zero insert mentality then you drill out a hole to make the upside down contraption when you could have sawn an inch past the hole before screwing it down to have another zero clearance solution.

i guess everybody knows now!

When do you get to the part "no one knows"? My 15 year old Festool jigsaw has a zero clearance insert system and a bench top mode...

Didn't see any hidden features, just hacks...

You must be new to woodworking,we know this from years ago

Hidden features...yes it cuts wood!

yeah. fall on that and it'll be comfy wont it he who uses a tool not as it was intended or must bear the consequences there was reason why the blade was tucked away outof site IT WAS SAFER

I knew you could do that with a jigsaw.

No body knows only you right…🤣😂🦆🦆

First hack…just score it with a razor knife..

so where was the hidden feature of the jigsaw? not one of those was a feature of the jigsaw, not a single 1

I wouldn’t even use a jigsaw for a cut like that first one and I would use my bandsaw or table saw instead of trying to hang a jig saw upside down

So, if "nobody knows" is this AI generated and published

where's the part that I didn't know?

Hey, you need to get that line under your thumbnail checked out by a dermatologist if you haven’t already. It could be nothing, but it also could be very serious. Please Google it. Thx.

Lane

I didn't see a single hidden feature! It was titled "nobody knows you can do this" and i knew you could do all of it as did the person who made the vid, so that's at least 2 people. I'm sure there are many millions more who do.

Dont see anything nobody doesn't already know....

Ridiculous , use the proper tool and you won't get tear out .

That was a joke !!!

Why aren’t you talking?

Love that I didn’t have to listen to some guy chatter on before and between each demonstration

If you use the correct blade for the application you will not get tear out

Lol is that a Dewalt paddle pop stick

Buy some down cutter blades same results

Number one, that’s not a jigsaw! It’s is in fact a Sabre saw!

Why can’t you talk

Wow!