Nucleares - Complete SHUT DOWN Tutorial

Подписаться 2,9 тыс.

Просмотров 14 тыс.

50% 1

This is an All in 1 Complete Shut Down Tutorial & Guide on what you need to do (and how) to get the Reactor Completely Shut down as well as including how to power everything OFF to enable you to fix/repair everything AND how to reset anything needed to bring your Reactor back Online again asap.
Join in on the fun and Comment your own suggestions as 2 heads are better than one (and so forth) so we can work together to create something great and bond along the way... Aussie Aussie Aussie...!!!
Check out all my Designs, Worlds, Collections AND HEAPS MORE, Right Here... :)
🏠 Sharpy101 Games YT Channel: / @sharpy1o1games
📺 My Facebook Page: / sharpy1o1
💎Download from My Steam Workshop:
steamcommunity...
💎Download from My Mod.io:
mod.io/members...
🍫Episode Notes...
There are many updates to this game, almost daily, and the method used seen In this Tutorial may or may not be subject to change over the course of updates/patches of Nucleares... Like for more as I'm currently planning to make a Playthrough in Normal Career as a Solo Nuclear Engineer who's boss just let me there to deal with everything...? 🤯👌
Many tips and hints in this Episode that I hope your listening and learning like me still :)
Please comment any thoughts or opinions on how or what, you, do or don't like about my Survival or Channel or Designs as I'll be sure to reply and apply them in future videos (I make these for YOU, my viewers)
#nucleares #nuclearreactor #simulator

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@peterpanter3580 9 месяцев назад

Yay 🎉 Great job ! Keep it coming !!

@ShArPy1o1Games 9 месяцев назад

Thanks heaps as this was a hard tutorial to make due to the fact of not knowing any of your Game's variables like power output or amount of loops you have available, so I tried to get a good balance between everything and tried to explain as much as I could 😇 Hope it helped 😎🤯

@peterpanter3580 9 месяцев назад

@@ShArPy1o1Games Actually I figured it out myself already....the hard way 😂 Still I love watching your videos . Giving on the point information what is needed, not one second to short or to long . I think you are the best source on RU-vid for Nucleares. Hope your channel grows together with the game 🫰

@ShArPy1o1Games 9 месяцев назад

Thank you so much for the positive feedback and for the Awesome Support to the channel as always... I do have to say that learning the 'hard way' is so much more fun than people realise 🤔😇

@LordCaladus 9 месяцев назад

I had to figure this out by myself. Didn't realize the time skip during heavy maintenance so that was fun. Feels good to get everything fixed up though and ready to go back online

@ShArPy1o1Games 9 месяцев назад

Absolutely, nice clean and fresh start just before doing upgrades to make it all better 👌🤔

@AllegedlyLuca 9 месяцев назад

With the game lacking tutorials or technical guides built-up, I've found your videos very useful. Something I learned which might speed things up-If you are holding either of the shift keys while using a switch, button, or dial, you skip the character/camera animation of them going to the control and save a little time. This doesn't seem to work on the number panels. I learned this by accident, I was still holding shift after running to turn the pressuriser on and the switch toggled without the animation. I repeated this a few times to confirm it wasn't some bug.

@ShArPy1o1Games 9 месяцев назад

I'll give it a go, sounds fun a efficient haha, cheers for the heads up

@AllegedlyLuca 9 месяцев назад

You're welcome. I like the videos on this too, they're very informative and helpful.

@ShArPy1o1Games 9 месяцев назад

Coming out with another soon as an update dropped earlier today that includes a 'Synchro' to the generator

@AllegedlyLuca 9 месяцев назад

The synchroscope is an interesting addition. It doesn't change startup too much that I've seen so far though.

@ShArPy1o1Games 9 месяцев назад

No it doesn't at all other than overall outputting power to the grid... Also shut down hasn't changed in any way as you can ignore the Synchro 100% apon shut down

@GoldenAura32 9 месяцев назад

What better way to start the day.

@ShArPy1o1Games 9 месяцев назад

Haha that's heaps, hope it helps and hope your having fun 😇😎

@Austenmad24 9 месяцев назад

Awesome, Thanks this really help me,,,i can now do my maintenance :) :)

@ShArPy1o1Games 9 месяцев назад

Glad it helped and hope your having fun 😎

@Tyrope 9 месяцев назад

I'm not 100% sure, but I think by generating so much steam and then bypassing it straight to the condenser is how your condenser wear is increasing so fast. At least, that makes sense in my head. It's doing more work therefore wears down quicker.

@ShArPy1o1Games 9 месяцев назад

That may be the case and ill remember that in future playthroughs... thanks heaps 😎🤓✌️

@EasyRider941 9 месяцев назад

In normal powerplant power is reduced and then turbine is going off line from low power but steam is going through it till the end.Bypass valve is usually used on startup not shutdown. @@ShArPy1o1Games

@carlsojos 9 месяцев назад

I usually use primary pump speed to control power output- the primary circuit's flow is a direct function to the amount of power being pulled out of the core, so reducing the speed and adding control rod to compensate for the reactivity results in less power and steam at the same core temperature. Real-world nuclear plants don't do this, but that's because they're almost exclusively designed as baseload plants that don't react to demand.

@xeels2708 8 месяцев назад

@@carlsojosFYI, Load-following is becoming more and more common in NPPs, the French have been doing it for at least 2 decades and probably more,

@stevesmith7065 9 месяцев назад

Can you do a tutorial about the Synchroscope and synchronization? Thanks

@ShArPy1o1Games 9 месяцев назад

Shall do, it's easier than people think 😇🤯

@skippythemagnificent3975 9 месяцев назад

Very nice

@ShArPy1o1Games 9 месяцев назад

Thanks heaps... Still works as the New Scynchroscope is only to output power to the grid and you don't have to touch it at all during shutdown 😎✌️

@jimboforuk 9 месяцев назад

i see ur playing with the resistors switched on, (thats bad practice lol) the reason being its classed as an emergency service so you'll fail the "do not use emergency services" objective when it appears and loose out on a big chunk of points you can safely deliver up to 10% more than the demand without penalty and be able to keep your compliance high, just a tid bit of info for you

@ShArPy1o1Games 9 месяцев назад

Wow, didn't know that... I'll definitely try that in my next shut down 🤔😎

@jimboforuk 9 месяцев назад

@@ShArPy1o1Games we're all here to help each other, ive come to rely on the community of people who enjoy this game

@tranhai8895 3 месяца назад

Please make a video about shutdown but in chemical treatment mode

@ShArPy1o1Games 3 месяца назад

I have tried to but what I expect to happen with the Xenon and Iodine just doesn't rise etc. I think the dev still has a bit of work to do on shut downs as it's far from realistic atm 😇✌️

@ShArPy1o1Games 3 месяца назад

Normal procedure is a 3 day wait for the xenon to dissipate out of the core using its half-life .

@DrssaFerri 9 месяцев назад

Nice! you do not TRIP! (you do the same but not using the button :) ) didnt know that you can let the SG Lvl to get so high in the red zone! I usually open the vent to prevent that from happen

@ShArPy1o1Games 9 месяцев назад

Nah its fine to overpressurize due to the fact they are connected to your condenser so it just flows through. 🤓🫠

@ShArPy1o1Games 9 месяцев назад

No defs DONT TRIP as it vents the steam oit of the turbine into the surrounding room ultimately losing volume in your condenser. 🤔

@delta1200 4 месяца назад

This tutorial: not great, not terrible.

@ShArPy1o1Games 4 месяца назад

Many, more recent tutorials... 😇🤪🤯

@chrisfeaster7989 9 месяцев назад

Thanks for the help on discord.

@ShArPy1o1Games 9 месяцев назад

All good, anytime 🤓

@Mr_Nuggins 9 месяцев назад

Do you have plans on doing a video for a startup of this system? I did a shut down and added another full loop, but its like I cant make back my power again to even were it was with the starting loop.

@ShArPy1o1Games 9 месяцев назад

I might just show how to start the Reactor up with 3 loops going while explaining the Synchro at the same time 😎🤔

@Mr_Nuggins 9 месяцев назад

Synchro needs a little explaining. With the other loop its like I'll gain generator power and loose it quickly and throws off the Synchro, but reactor is like around 345c-350c. Adding that other loop changed so much. I have a friend that works in nuclear power and explaing this game it feels so foreign to him. Hes at a 1300mw BWR so he not as fully familiar with PWR on this small scale.

@ShArPy1o1Games 9 месяцев назад

It's easier than you think... currently recording an Advanced 3 Loop Start-up and tutorial on the Synchro 🤯😇😎