OIL CHANGE Mazda B2600i, B2200 - ALL SPECS YOU NEED: oil capacity, oil grade, ect. // 4K

Подписаться 30 тыс.

Просмотров 9 тыс.

50% 1

OIL CHANGE MAZDA b2600i, b2200 - ALL SPECS YOU NEED Everything you need to know how to change engine oil on Mazda b2600i equipped with G6 engine and Mazda b2200 - F2 engine.
Oil change specifications:
- oil capacity: 5.5 litres (5.8 US qt) - b2600i; 4.6 litres (4.9 US qt) - b2200;
- oil grade: API service SG Energy Conserving II (EC II) - 5w30 (10w30);
- drain plug torque: 22-30 ft-lb (29-41 Nm)
#b2600i #oilchange #pistonshack
Other interesting videos, check it out: HOW TO REMOVE RUSTED PICKUP TRUCK BED - Easy One Man Job // 4K • HOW TO REMOVE RUSTED P...
5.2 meters of 28 years OLD RUSTY BRAKE LINES AND SEIZED FITTINGS removed EASY! (MAZDA b2600i) // 4K • 5.2 meters of 28 years...
50$ MAZDA b2600i IS GETTING NEW BRAKE LINES! HOW TO BEND BRAKE LINES Cheap! // 4K • 50$ MAZDA b2600i IS GE...
SIMPLE BRAKE LINES INSTALLATION TIPS. Mazda b2600i Project Truck// 4K • SIMPLE BRAKE LINES INS...
MAZDA b2600i, b2200i truck - NO POWER, BOGGING DOWN? Check This First! // 4K • MAZDA b2600i, b2200i t...
IGNITION TIMING MAZDA b2600i, b2200i //4K • IGNITION TIMING MAZDA ...
TROUBLESHOOTING AND DIAGNOSIS • TROUBLESHOOTING AND DI...
HEAVY EQUIPMENT BAY • HEAVY EQUIPMENT BAY
COLD WINTER DIESEL START • COLD WINTER DIESEL START
I AM STUCK... • I AM STUCK...
Please subscribe to my channel for more useful and interesting tutorials.
DISCLAIMER: Due to factors beyond the control of PISTONSHACK, it cannot guarantee against unauthorized modifications of this information or improper use of this information. PISTONSHACK assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. PISTONSHACK recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of PISTONSHACK, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not PISTONSHACK.

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@sbmasson 3 года назад

Those were great old trucks....I owned one for many years

@PistonShack 3 года назад

Absolutely Bruce! Perfect example of smart and minimalist Japanese engineering. Nowadays its getting hard to find B2600i. I have been looking for another decent one for over a year.

@jonathanjadotte 3 года назад

should i buy a 1991 mazda B-series B2600, 200k miles, manual , for $3k ?

@peterlampropoulos3505 3 года назад

Best advice and well explained

@PistonShack 3 года назад

Kαλημέρα Peter. Thanks a lot for watching! I tried to make it straight to the point and short as possible. Sounds like it's only one video on RU-vid "How to change engine oil on Mazda B2600i", so far! να έχεις μια μέρα θεού.

@peterlampropoulos3505 3 года назад

I was doing a timing belt on my volvo s70 t5 and I saw your video on the cam seals. Made the job twice as productive and very easy.

@JonHeaven Год назад

Love my b2600i when it's not ticking. Recently solved that problem with a quart of ATF in the engine oil. I just run it that way now.

@PistonShack Год назад

Oh, that's interesting. I would be careful adding ATF to engine oil. Mine ticks a bit on warm up as well.

@SupGolden 2 года назад

Hey bro what do you reckon the fuel consumption is like? Because mine is guzzling it.

@PistonShack 2 года назад

Hey buddy! Mine has combine 12-15L/100 km. What is yours?

@jamiepirie9758 2 года назад

my b2200 (FE engine 2.2 litre) is getting 350-400km per tank which is 46L or so

@whitebreadmexicanproductio1030 2 года назад

sorry to ask a dumb question but does the torque Nm mean how many rotations of the wrench? The internet refuses to explain this to me!

@PistonShack 2 года назад

Nope, torque isn't number of the rotations. Torque = twisting force.

@johnbryan2414 Год назад

I have a b2600i, but it is a 2 wheel drive. Does that mean it takes the same as the 2200? I doubt it takes almost 6 qts of oil.

@nuttzandboltzgarage1946 3 года назад

Would an intermittent idle and power output lead one to believe the computer is to blame? I unplugged the spark plugs one at a time while it was running and reconnected them. For about ten min after it ran perfectly then went back to a lower power/miss. The wires and plugs are new as well as cap and rotor. Runs Just like your other vid.

@PistonShack 3 года назад

Hey Nuttz&BoltzGarage! I don't think so, seems like you just have faulty ECU module, if you still run original one. I would pick junk yard ECU to check it out.

@PistonShack 3 года назад

Let me know how is your Mazda. Cheers!

@nuttzandboltzgarage1946 3 года назад

I pulled the ecu opened it up and it looks like new inside no corrosion on the board or components. What would I be looking for in a bad ecu? A vid on multi meter testing would help if there is one..

@adal006 3 года назад

you find the problem for the computer?

@PistonShack 3 года назад

Hi Solis, I swapped another ECU from donor Mazda. It works so far so good.

@adal006 3 года назад

But is g630 ?

@PistonShack 3 года назад

@@adal006 Well, I have b2200 parts truck with F2 engine. I just swapped ECU from F2 engine to b2600i G6 engine. So far doesn't affect engine performance etc. The truck runs fantastic but I am planning to get G6 ECU later.

@adal006 3 года назад

Great brother f2? What type is the ecu

@PistonShack 3 года назад

@@adal006 Hello Solis! It works like a clock. ECU from b2200 RWD 5 speed manual shift. ECU # F2G8, serial f2g8 18 881b, e2t02985t 2310 I got 4x4 fixed today - she is beast on snow now) More vids are coming. How is your repair going? Cheers brother!

@Hotka23 3 года назад

Just want to clarify I have read that engine oil capacity on the G6 is 4.7l +0.2l for the fuel filter making a total of 4.9L. You specify that it is 5.5L how did you get this value?

@PistonShack 3 года назад

I got specs from Mazda b2600i Service Repair Manual.

@tidentenn Год назад

@@PistonShack The FSM (TD-8) lists 5.8 quarts for a dry engine. With a drain and new WIX 51356 filter, 5.25 quarts fills mine to the MAX line.

@rickyelvis3215 2 года назад

If you had to choose ~ 2200 or 2600! ? you would go with the...

@PistonShack 2 года назад

Hey Nelson! They are both good trucks. I would get b2600i manual 5 speed 4x4 as ideal - but 4x2 2200 or 2600i still nice light city trucks. 2.6L engine has more power compare under powered 2.2L. Try to find truck without frame rust around rear axle mounts. Let me know if you have any questions.