Oil Filter Housing + Oil Cooler Gasket Replacement BMW F30 335i N55

Подписаться 18 тыс.

Просмотров 33 тыс.

50% 1

In this video I show how I replaced the Oil Filter Housing and Oil Cooler Gasket on my 2014 BMW 335i with the N55 engine.
IMPORTANT NOTE
I mentioned in the video that there were claims of possible engine failure after this replacement when the priming procedure is not performed before starting the car right after this replacement. I did not perform the priming procedure and have driven the car over 1,000 miles since I did this replacement and I have had no issues at all after doing this replacement!
NOTE : I am not a professional or certified mechanic or an expert. I do this as a hobby in my free time. Perform this job at your own risk!
LINKS
Parts:
Oil Filter Housing Gasket www.fcpeuro.com/products/bmw-...
Oil Cooler Gasket www.fcpeuro.com/products/bmw-...
Oil Cooler Line O-Ring www.fcpeuro.com/products/bmw-...
Large Coolant Hose to Oil Filter Housing www.fcpeuro.com/products/bmw-...
Small Coolant Line to Coolant Expansion Tank www.fcpeuro.com/products/bmw-...
Aluminum Coolant Hose Flange www.fcpeuro.com/products/bmw-...
BMW Coolant www.fcpeuro.com/products/bmw-...
Intake Manifold Nut www.fcpeuro.com/products/bmw-...
Tools:
E-Torx Socket Set amzn.to/3atz9bG
E-Torx Wrench amzn.to/2WwOH6k
E-Torx Bit Set amzn.to/3au4RVV
Universal Swivel Joint Set amzn.to/2J3AhXY
Socket Wrench + Socket Set amzn.to/3nzUlQZ
NOTE : Some of these links my be affiliate links which means I earn a small commission if you order something from the links I provided. This will help out this newly started channel.

Авто/Мото

Опубликовано:

19 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@Awalker9383 3 года назад

I can’t thank you enough for this... Literally saved $1000s doing this and OFHG myself. I wouldn’t have been able to do it without such a comprehensive video like this one.

@RaceDefendImportTunerTeam 2 года назад

Wow you wouldve been getting ripped my indy does gasket w install with oil change for $300 lmao

@drewsXR650L Год назад

~200 for everything, not bad.

@aimized1460 Год назад

@@RaceDefendImportTunerTeam I wonder how buddy when the gaskets are 40$ and the oil + filter is another 130$ so your telling me he does the gasket for 130$ lmfaoo your chopped (cad dollars also…)

@ViewsofTheVI 3 года назад

This takes a lot of work to make! Thanks for the video

@MrJoelerjoeler 2 года назад

Thanks again for this video. I just finished the job and can’t thank you enough. It took me roughly 4 hours to do the job with some help. Well worth a diy as this would cost $600-1200 at the dealership. My engine had so much oil residue on my block. It seems that it should have been replaced 30k kms ago

@InlineSixAuto 2 года назад

Glad I could help guide!

@knownbutunknown 9 месяцев назад

This was a great video! I'm halfway done with mines and you just saved me $1500.00! Thanks buddy and wish me well on the 2nd half

@songxu1000 Год назад

you do not need to cut the hose in order to put on new flange. Use a pipe plier and a little pressure will crack the plastic one into big pieces. Note, tilt the pipe downward, so pieces fall into the hose.

@ALKOHOLIC45 3 года назад

Thank you for the short but very informative video. My car has been sitting in my driveway for two days now as I was able to change out the gaskets. But my plastic flange also broke like yours when I took it off to make it easier to unscrew that bottom bolt. Lol.

@osoo135 2 года назад

Mine was parked for 3 months 😫 🤭

@donaldbarron7916 3 года назад

Awesome show 👏..

@shmerd1 Год назад

Appreciate the video for sure! Thanks Suggest you record the audio at a higher level. It was hard to hear with my phone cranked.

@ridiculousness7477 2 года назад

Awesome man thank you

@rodrigomeca 3 года назад

Thank you, wouldnt be better to remove oil filter do drain the oil?

@edwardhurst2533 2 года назад

I enjoyed the video and you have an excellent, calming voice and explained the steps very well, but why didn't you replace the intake manifold gasket? Once it is disturbed it will surely leak to some extent.

@InlineSixAuto 2 года назад

Yeah I’ve heard that but honestly I don’t see how it would affect anything when you really look at how the gaskets are seated. Plus it’s been a year and the car has been running great with no issues relating to that.

@balaodigaoakelwe9126 2 года назад

Thanks so much man! I managed. Wow

@rodgersheller5477 3 года назад

Have you ever tested whether it's really worth it to purchase a Dooxi Car Adaptation products?

@anthonyensupermot4646 2 года назад

Bonjours , quel est la procédure avant le redémarrage ? Merci

@Jonny2by4 Год назад

After doing the alternator bracket gasket and oil cooler o-rings on my N62, this looks like a cakewalk lol

@6Diego1Diego9 2 месяца назад

I'm glad i already upgraded that Micky mouse flange

@mokoensn 3 года назад

Where do you get the oil cooler pipe casgets, I couldn't get them at the dealer

@InlineSixAuto 3 года назад

I have em linked from fcp euro in the description of the video!

@itsleak2897 2 года назад

Do you have to replace any of these aluminum bolts after or no ?

@InlineSixAuto 2 года назад

You don’t have too. But you might want to get new ones since you may strip/round them off trying to get them out

@enayetkhan9397 Год назад

Can it cause damage to the engine if you directly start the car after the OFHG replacement without priming it first? Thanks!

@InlineSixAuto Год назад

It seems there's a small chance of engine failure after doing this replacement without priming but I never did priming and never had any issues since doing this. And from what I've seen many other haven't either after doing this. Only a small percentage of N55s have had issues from what I can tell.

@wahabzazai1963 Год назад

Theres higher chances in e chassis so fill housing with oil and unplug lpfp fuse and crank it. Better safe then sorry

@77cvalle77 7 месяцев назад

Curious If that Rein radiator hose failed? I installed mine in Oct2022 and by Nov2023 it is leaking at the seam. Not sure it is user error during install as its straight forward.

@InlineSixAuto 7 месяцев назад

Yes mine ended up failing also lol. I ended up just getting genuine BMW the second time replacing it

@77cvalle77 7 месяцев назад

@@InlineSixAuto terrible craftsmanship and or quality especially with a product with a backing like Rein. Waiting for my OEM to come in. Thanks for confirming.

@michaelnikprelaj6679 Год назад

Weren’t you supposed to change the intake manifold gaskets after removing the intake manifold?

@InlineSixAuto Год назад

You can but not required. havent had any issues since which this was almost 2 years ago

@Alikhan78611 2 года назад

Do I need to replace the oil cooler bolts as well or just the oil filter housing bolts?

@InlineSixAuto 2 года назад

Just the bolts for the oil filter housing

@Alikhan78611 2 года назад

@@InlineSixAuto thanks man.

@kay__519 Год назад

Going to dedicate a whole day for this sigh

@InlineSixAuto Год назад

That's a good idea lol

@essiemeister 3 года назад

Do I do an oil change before? Empty?

@InlineSixAuto 3 года назад

You can if you want to. I didn’t.

@Mr2231314 Год назад

How long was the actual time for you to do this project?

@InlineSixAuto Год назад

probably around 6 hours total

@raulmartinez3484 Год назад

I had some engine problems right after doing an oil housing gasket change. I pulled fuse 165 and let it die out so I knew there wasn't any fuel. When I tried to prime the engine after installing the oil housing gasket the engine turned on and now I have some engine problems. I got codes 131501 Vanos Inlet Cold Start: Not Controllable, 0, 120408 Boost Pressure Control Cut-Off Pressure Rise Blocked. 0 , & P052B Cold Start "A" Camshaft Position Timing Over-Retarded Bank 1. My advice for this is to disconnect the battery after you drained the engine of fuel after removing fuse 165 and then finish this job within a few hours.

@dndxander Год назад

How do you prime the engine?

@raulmartinez3484 Год назад

@@dndxander This is for after you removed the oil. Pull the fuse for your oil pump if it wasn't pulled before. Try to start it and then let it die out. Keep trying to crank it at least 3 times. Your engine is primed.

@icebruner 3 года назад

Having a hard time to remove the manifold took all the bolts out still won't come off

@InlineSixAuto 3 года назад

Should easily come off if all the bolts are off. Unless it was glued on or something.

@omarluque8470 Год назад

Is this kinda the same for a n54

@InlineSixAuto Год назад

I think its very similar but not exactly the same

@arminkladanjcic671 Год назад

If you don't get it changed immediately could it cause damage to any other parts of the car? I need about a week before I can fix it am I okay to continue driving it?

@InlineSixAuto Год назад

Yes its fine if its not leaking a significant amount oil

@arminkladanjcic671 Год назад

@@InlineSixAuto its leaking quite a bit I'm actually adding some oil today because of how much I've lost over the last 5 days. Is there anything I can keep an eye out for?

@InlineSixAuto Год назад

@@arminkladanjcic671 Oh wow okay. And for sure you know its all leaking from there? And is it giving you a low oil warning?

@arminkladanjcic671 Год назад

The low warning light only came on today. I am pretty sure it's all coming out of there because there's oil all around it

@InlineSixAuto Год назад

@@arminkladanjcic671 Well if you keep driving just make sure to add oil so it doesnt get too low until you can replace it

@Thomas998822 2 года назад

Could you have just left the coolant hose on?

@InlineSixAuto 2 года назад

I wanted to replace it cause there was oil over it where it connects to the oil filter housing but I couldn’t get it off and I ended up breaking it while I was struggling to get it off. But yes you could just leave it on if you want.

@sechszylinder8055 3 года назад

Did you prime the oil pump after the job ? Several guys get engine failure after this job, it seems that they forget to prime the oil system

@InlineSixAuto 3 года назад

I was aware that some people experienced this after doing this job. But from I read and saw, it was really only a handful of people that actually had this happened. Majority of people did not have anything happen, me included. I’ve driven about 1500 miles since I did this and not priming anything. Have had no issues.

@sechszylinder8055 3 года назад

@@InlineSixAuto So why it happens ? Iive in Germany and nobody gets this failure after doing this job. I try to find any correlation between guys who get this failure...

@InlineSixAuto 3 года назад

From what I’ve seen, nobody knows for sure if there really is any correlation between the two things. It might just coincidental.

@U--Haul 3 года назад

@@InlineSixAuto 1200-1500 miles is when the failure is supposed to occur after the OFHG replacment if it does happen, please keep this updated.

@MrForceX24 3 года назад

@@sechszylinder8055 Hi there, just want to inform you: Here in switzerland they told me at BMW Dealership that they also had a handful people which had an engine failure after replacing. They told me that they do not have any idea why this happens and the customer has to pay for a new engine. He also mentioned this only happened to older generation (I guess the E model) - he told me for my F32 it should be fine.