OM606 DEFENDER INTAKE UPGRADE, SOUNDS SWEEEEET!!! 

Goood job the first person i see who tunes a diesel engine and it doesn't smoke

This has got to be the best om606 fan channel and shop out there

The om606 is one of my favorite engines ever Love the vids

Love the color. Florida Power Green 🍏

Get rid of the factory snorkel and just go 4" or 3" stainless pipe bent up to go through the guard and into the air box...will breathe better!

Fantastic attention to detail and knowledge

Met these two over three years ago on some local lanes, mental seeing the G-wagon

Fives and sixes are always much smoother/ nicer than fours. That said my dad has a 300tdi in his Landy 90 and I love the pull and sound of the big Garrett turbo. Not as nice as the D5 in my V70 though.

Ten bolts to fix that airbox heatsheild to the engine, I'm pretty sure you could use that thing as a hoist point😁

Nice car, chap! I think it resembles the best of both worlds. Very good looking, just as if was designed to acommodate the 606, nice done!

you guys doing goid , keep it up ! (not a lot of craptalk makes it very cool)

Very nice Airbox! Would Probably also fit under a W124 bonnet and would make it Look OEM (oc without the Window on top) with a huge Filter

Поработал бы с Вами, ребята. Вы крутые

You can't beat putting your whole fist in

I need one of these beastly motors in my Nissan Hardbody so bad

ditch that snorkel completely and fab up one from a bit of 4 inch stainless

I was just thinking about them headphones today

Hmm I need this in my unimog 404

Big like from Croatia!

I'm sure i saw you guys in your Light Green Land and Swampers heading towards Gilberdike Early April 2021

سلام عليكم ورحمة الله وبركاته تحياتي لكم جميعا على هذا المجهود الرائع تحياتي لكم من المغرب

Looks great. Any suggestions for om606 in a series 2 landy? Would probably need to upgrade to the stronger transmission and transfer case plus axels.

Looks and sounds great. I think it would go good in a toyota 4runner 4x4

Hell with the Frankenstein building, when a world traveler uses the machine where are parts in Brazil? Unimog or bust.

Sehr schön 👍

Best in the game 👌

i have a rusty chassis to repair on my d2 I would much rather be putting a Merc engine in aha sweet build !!!!

Can you tell by now, listening to the rhythm of the CNC, exactly how far along it is cutting the manifold or whatever is in there ? 🤣

nice intake woosh

Awesome

Those seats look like the mg TF seats just with land rover instead of MG on them

Isn't that a bit much torque for a R380? Or isn't the Om606 modified that much?

Yes the vehicle is lovely....the smell of diesel....ahhh

Please do things/parts for discovery II

Are you based just out of Selby on the old quarry site?

Would like to put one in my 99 trooper!! Would you make a kit if more ppl ask??

Hello. If you delete the viscous fan and switch to slim electrics., is there any hope this kit would fit in a 2a 88?

Wonder if an OM606 would fit in my Delica?

This is stock turbo? I’ll check out that airbox in your shop!;)

Mate when's the billet manifold update comin?

What are the spec’s for the 606 iv got a 105 series landcurser and I want to put a good turbo diesel in it

BUEN VIDEO AMIGO . QUE SE PUEDE HACER CON UN 903 912 DE MERCEDES BENZ

🔥🔥🔥🔥

Alright, I’m gonna say it.....Put the om606 in a Supra

When is some brave soul gonna om606 swap a miata?

What is the model of the water and oil radiator ? Thanks

Hello, how much to get concert my 300tdi?

I might take the 606 out before I scrap my E300!

What is the turbo?

What’s the best turbo you recommend for Om606 ?

I. Willing to 606 my jkur

DPUK. Does one need to fit an OM606 with a rear sump to clear the front diff' ? Thanks for advice on manual gearbox compatibilities for our Land Rovers ! V.

I want kit for 2001 land rover discovery plz advise

How hard is it to put a td5 in to a 200tdi?

(awesome)

U wash your vehicle from top to bottom hehe

Well, since you guys seem to be the experts, what kinda controls are needed for an om6xx engine? I have a Windsor (I cooker her 😔) powered ranger, I know I can get adapters for a Windsor bellhousing, and I can run a fuel pump easily, but, I wonder what it takes to make the little diesel go, and do it reliably. I honestly suspect it's not that hard since ford uses a lot of metric stuff and runs things through the body harness, separate of the engine and pcm. For rpm it uses a crank trigger and 36:1 rotation ratio for tachometer input. I want at least as much torque as my 5.0 made, roughly 275# of torque. After all that conversation, if you can tell me physical dimensions of the engine? And yeah, rear sump looks absolutely Mandatory due to crossmember, and front differential (d35 sla, drive shaft). Intercooler/charge air cooler? Ford svo/t/c?

606 jeep jku

I would like to fit this engine om606 into my landrover defender tdi how much does it cost

The only bad thing about Land Rovers that I heard is that the axels are weak.

Far superior to the crappy EV Range rover on "vintage voltage" channel. You can't beat a good reliable diesel engine, anything pre 2008 or created by yourself. Pure mechanical bliss, no ecu's to go wrong.

Fist it? 🤣

omg you wash from top to bottom not opposite hahahah

Musics annoying

I think the guy videoing needs a new air intake. Breathing like just ran a marathon.

Yeah it's annoying hearing them bitch about you guys lol

best of old tech and utility...until the greenies get it taxed out of existence

Awesome