OMT R-1234yf 4-Port AC Manifold Gauge Kit Review (Honda Clarity AC Recharge)

Подписаться 14 тыс.

Просмотров 2,3 тыс.

50% 1

I'm doing a quick recharge of R-1234yf on my 2018 Honda Clarity, using the affordable but well build OMT R-1234yf 4-Way Manifold Gauge Kit that I bought from Amazon: amzn.to/46EmI6u and R1234yf refrigerant: amzn.to/46Hd4Ab My car started to blow warm air a couple weeks ago. No vacuum pump was used today, I just checked the pressure and it was low on refrigerant so I added about 7oz. For a complete AC refrigerant service including vacuuming the system, see my other video here: • Ford Mustang R134a AC ...
0:00 Introduction
2:10 Unboxing
4:07 **R1234yf/R134a Can Tap Adapter Difference**
7:33 Gauge construction
9:45 Extra parts included!
11:00 Included Hoses
12:39 **Make sure washers are present on all connections**
15:01 Improved R1234yf connector (Compared to R134a)
16:10 Hose connections
19:23 AC Pressure Check (Make sure valves on manifolds are all closed to check the pressure only)
20:25 Recharge (top-off) the R1234yf refrigerant
22:14 Conclusion
24:05 Calibrate the gauge
25:27 Keep ports and seals clean after job complete.
Thanks for watching! Please like or subscribe to support my channel! Questions feel free to ask in the comments section below.
#acrepair #acservice #r1234yf

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6

@user-kv5zy5fm6g 2 месяца назад

Thanks for the videos!! I watched the mustany video, but my real issue is that I have a 2018 honda clarity like yourself and have my a/c getting off an off... I'm ordered this OMT kit and some R1234yf... I'm also hoping I can just top it off like you did. Did you have any more issues with your Clarity's A/C? IF so did you just add more? or purge? or bring it to Honda, I understand they have a TSB extended warranty on A/C compressors. I would love to have instructions like the mustang video/HArbor Frieght system.... Any other thoughts if I want to purge? Where did you find the pressure to Temp/humidity values for the Clarity? THANKS!!!

@TheGizmoGarage 2 месяца назад

I did only top off instead of purge the first time I did it half a year ago. It blowed warm air again after about 4 month. I think my AC condenser had leaks, maybe covered under Honda warranty. I plan to bring the car to dealer for warranty check on condenser. Before that I may just do a full purge and recharge with two full cans. The value was from some forum from someone posting the Honda Clarity mechanics manual

@robalan57 Месяц назад

Are you sure the curved side of the hose connects to the gauge? The ad for the product shows a photo of the gauge and hoses connected different than what you say.

@TheGizmoGarage Месяц назад

It really doesn't matter which end you use, depending on the application; on some vehicles or AC units, it may be easier to use a curved end for connecting to the unit. The most important factor is ensuring the connector doesn't twist itself loose during the test.

@reggieeldrealtor6827 25 дней назад

Hello, thanks for the video, very informative. I had a leak in my 2017 Sierra’s condenser like most gmc/chevy trucks do. I pulled consistent vacuum for 50 minutes. I let it sit for one hour with no changes. I add one 8 oz can of freon. It took a while 15+ minutes. I had it on a scale and watched the frozen condensation disappear. I turned off the valve at the can and added second can. The second can never got cold and did not decrease in weight. I tried a third can with the same results as the second can. Did I accidentally add air to the system changing cans? I’m puzzled. Do I have other problems? Compressor turned on and stayed on the entire time. No change in temperature on the thermostat I had mounted in the center vent even after the first can was completely empty. Minor condensation dripping from the evaporator coils. WTF did I do wrong? I used the same OMT manifold with an OMT Vacuum Pump, 4.5 cfm.

@TheGizmoGarage 25 дней назад

Sounds like other issue maybe present in the system, need to diagnose the system use pressure readings from the gauge: rechargeac.com/how-to/ac-system-pressure-chart/