One Vacuum Cleaner For Whole Workshop || Woodworking Dust Collection System From PVC Pipes

Подписаться 802 тыс.

Просмотров 569 тыс.

50% 1

How To Make A Blast Gates For A Dust Collection System
In this video I will show you how a very simple homemade device could efficiently collect all dust from various workshop power tools by using only one shop vac.
I made a dust splitter for 5 tools, but it could be made with your preferred number of ports and sizes. This is a general idea of how the very simple device could be made depending on each workshop’s needs. And yes, this is one of those builds that I’m questioning myself - “why I didn’t build it years ago”.
Used parts:
- Neodymium magnets 10x5mm: shorturl.at/rJP48
- Dust hose: shorturl.at/mK148
- Forstner bits: shorturl.at/rR056
DIY Cyclone Dust Collector From Two Buckets - • DIY: Cyclone Dust Coll...

Хобби

Опубликовано:

15 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 234

@joooooooooooe 28 дней назад

your use of tape as an epoxy mixing surface is genius. it’s disposable and you don’t have to worry about it blowing away

@mrgcav 27 дней назад

Where have you been? This has been done for decades. Nothing new.

@faithful451 27 дней назад

Yeh it's good ay I've seen a couple people doing it and I was like damn this completely fixes why I hated using epoxy glue. Hopefully I remember it next time I need it

@sapelesteve 3 месяца назад

Hands down one of the best dust collection systems that I have seen on YT! Well done! 👍👍

@siggyincr7447 2 месяца назад

Using the magnets to simultaneously position and pull the sealing faces against each other is really clever. I would only say that you would want the magnets to be ever so slightly recessed below the surface to minimize suction leaks at the sliding joint. With so many half-baked ideas on DIY channels, it's nice to see something that someone actually well thought out and made.

@Dnias1 13 дней назад

This is a really cool system. The fact that you don't need any fancy electronics, yet it's super simple and effective, makes me want to build this. In fact, I think I'm going to build one! Thanks for the awesome video :)

@Jasonsdesignshop 2 года назад

Well, you beat me to this idea fellow RU-vidr! I thought about it for three days and came up with this idea to avoid buying the expensive gates then searched RU-vid to see if this idea was out there. And there you are. I think two others as well. Your best contribution to the concept is the magnets! Love it. This is my next shop project. Thanks for proving the concept for me 😎

@Jasonsdesignshop Год назад

Just finished it and ya it’s awesome! Totally should have done this two years ago but I did not have all the tools then. My video coming out soon!

@alexcorona Год назад

These have been in shops for decades lol

@tomfull6637 3 месяца назад

@@alexcoronaYou missed the essential part!

@Bo-kq8tn 3 месяца назад

This feels like one of those designs so good it seems like it would be obvious, but was probably much harder to come up with and design than people realize. Well done and thank you for making a video about it! I love how easy it would be to move tools around in the future since they're on flexible hoses that could detach. Modularity is great in any shop! :)

@creamwobbly Месяц назад

Yes, except it's already solved by IC engine exhaust headers and steam engine blast pipes. If he'd built permanent junctions, no switching would be necessary.

@creamwobbly Месяц назад

Oh, also he could run multiple tools simultaneously.

@techheck3358 20 дней назад

@@creamwobblyexcept the shop vac isn’t strong enough to collect from multiple machines simultaneously. The whole point of this is to concentrate the suction on a single machine

@amosevie Год назад

This is a great idea and easy to build. I had an extensive dust collection system before we moved, and now I don't have room in my one car garage for a big unit. This will definitely fit in my small shop with a couple of vacs and separators.

@Mriya6 3 месяца назад

Excellent idea! For added aesthetic I would have painted different coloured bands on each hose, and then painted each port with the matching colour. So even someone unfamiliar with your workshop could go "green hose, green port, easy!"

@cyrilnorrie8450 4 месяца назад

What an excellent design and you won’t experience suction loss from bends or blind corners in a box. Thanks for sharing your idea.

@I3urton 2 месяца назад

I don't even have a workshop, but if I ever do, I'm definitely stealing this idea. Absolutely brilliant in its simplicity!

@cook6052 10 месяцев назад

Just love the efficient simplicity of your dust manafold.❤

@andyhewitt3527 Год назад

This is so great! Thanks for sharing I never would have thought I'd be able to do something like that myself

@danam664 2 года назад

Truly a useful build. I'm definitely going to make some of these. Thank you for sharing this.

@Chris-oj7ro Год назад

Thank you! This is exactly what I needed. This beats using blast gates because the flow restriction should be less.

@glennryzebol4472 3 месяца назад

this is super slick. Well designed, functional, tidy. Well done!!

@kenord3437 3 месяца назад

What a great idea, thank you, I will have to build this for my shop. You are a God sent, many thanks to you, Ken from Australia

@milosgrujic9118 2 месяца назад

Love this briliant idea and also love how now I have all the stuff to build this. Great! Thanks!

@pavelpleva5897 3 месяца назад

Well done, I'm looking forward to making a copy of it. Just an idea a 90° knee pointed downwards would make the front hose stick out a little less...

@danielcamacho4886 3 месяца назад

I was about to write the same idea :)

@ricardolacza 2 года назад

Incredibly creative and simple. Thanks a lot.

@user-hh3ek3nr1k Год назад

Good job! Пара советов. Если не планируете перемещать инструменты, к которым подключено пылеотведение, соберите воздуховоды из жёсткой канализционной (серой) трубы - внутренняя поверхность этой трубы гладкая, сопротивление потоку воздуха меньше, а значит сэкономленных денег больше. Не видел изготовление Вами циклона, но думаю будет лучше заказать готовый с алиэкспресс. Лучше было бы развернуть вниз (прикрепить вертикально) изготовленную приспособу, чтоб не задевать коленями шланг. Успехов в труде, берегите себя! 👋

@KyleVeatch 4 месяца назад

Thanks for the video! I was looking for a dust collection management system for my shop and I ended up going with a larger version of this.

@MrGlyn321 4 месяца назад

This is a super idea, especially for a small workshop, which I have. Will definitely be making one of these. Thank you for sharing a very well-made video.

@greenkitty6482 3 месяца назад

That’s exactly what I need!!! Thanks for sharing 😃

@selianboy8508 Год назад

That is deffo about the best solution I have seen. SO EASY! I think that smooth piping is about the only thing I can think of to improve the setup. Since all piping to each tool is actually fixed, it would be better to have fixed piping to the dust separator. The less flex-tubing the better I would think. I will use this idea in my upcoming workshop revamp for sure. Thamk you.

@Dannyscuriousquests 25 дней назад

thats simply brilliant

@user-vl2zq6ox8u 3 месяца назад

Thanks, that is really a good idea. I especially like the use of the magnets. It'll help with suction loss.

@Mat0s0 27 дней назад

I think I'll replicate your design for when I start forming my own workshop!

@benjenkins2415 2 года назад

I love this. I was trying to think about a solution for using my Festool Midi and didn’t want to have to buy a bunch of custom hoses. This seems like the perfect solution. Thanks for sharing.

@ericbuller7079 Год назад

Hello! Has this solution worked well with your Festool? What is your maximum hose length?

@j.u.c.o 9 месяцев назад

Looked at a handful of these and this seems like the best design. The ones that open up into a larger section with plexiglass look cool, but they actually cause turbulence and a loss in suction because the airflow stream is interrupted/ isn't consistent. Whereas, in this one, there's almost no interruption because you're switching the hose over directly to line up with another hose. I'll be taking a stba at this one soon! thanks!

@bnssoftware3292 Год назад

I've seen a few of these but I like the idea of using magnets. That way you don't have to pull out a pin or anything. Brilliant. Thank you.

@user-dc6sw4xf9z Месяц назад

Throwing out my present system and going to build this. Excellent design.

@Tchefter 2 года назад

Comes to the right time! thanks for showing!

@soundmanmartin 2 года назад

fantastic.. .i built one myself a few years ago..but im now re making it.. the magnets why didnt i think of that ! you are a genius .

@devinredlich7011 2 года назад

This is a very elegant solution to the tool switching problem. Nice.

@rogerazevedo4094 2 месяца назад

Excellent idea. Clean, quick and very practical. A win win.

@gebber3890 2 года назад

Thank you for this! I just made one and it works awesome!

@Spodokamono 7 месяцев назад

Great idea and something I will definitely be incorporating into my workshop. 👏👏👏 Very well made video and very easy to follow. Thanks for uploading this helpful video. 👍

@vileguile4 2 года назад

I created very similar adapters with my 3d printer. A couple of times i designed them going in the wrong direction =) In the end though, very good results! Friction fit on pvc pipes using a minor angle worked great. Regarding your design here... it looks great and i will certainly copy it! Right now i have a system with one input and then several hoses hanging from the ceiling going to it from the machines. Magnets.. sliding thing ... brilliant! Well done!

@pstrzel 5 месяцев назад

Haha, did the same. I made a few, but first one was opposite direction.

@faithful451 27 дней назад

I love this setup. So cool

@HarmonieZvuku-harfy-kalimby Год назад

This is simple and briliant idea. I couldnt fine 50mm blast gates in local shops but I found this and I will use it, thank you. Just a thought about air restrictions. You are using too much hoses. If you rather use pipes and just a little of hoses it would be much better for air flow. Tomáš

@MCsCreations 2 года назад

Just brilliant, dude! Fantastic work! 😃 Stay safe there with your family! 🖖😊

@paullobwein1632 3 месяца назад

Love it! Thank you for sharing such a great idea

@JK-Handyman Год назад

This is exactly what i was looking for! thanks for sharing, you are a genius

@nore8141 7 месяцев назад

This is a great option especially when your in a small shop. Thanks 🙏

@--JawZ-- 3 месяца назад

Awesome idea, thanks for sharing it with us all!

@sydswaine3627 3 месяца назад

Brilliant! Thanks for this!

@charliehubbard4073 2 месяца назад

Brilliant! Thank you.

@avdeling20 7 месяцев назад

You're an absolute legend for sharing this. Built it tonight and it works like a boss ⭐

@hatbpto5180 2 года назад

Great idea with the magnets. You sir, are a mad scientist!

@jaxn66 Месяц назад

Ingenious brother, Thanks!

@Longnose154 3 месяца назад

well done sir!😉 you already said it yourself: how did I not come up with this idea earlier. I will most likely copy that for my shop🤪

@andrewbrown8148 Год назад

Great solution & design~! I'll definitely be building one of these for my workstation that holds my spindle sander, scroll saw, Kreg jig, & mortiser. Thanks~!

@LogiForce86 Месяц назад

For some reason I would probably add a felt surface (like those nice sticky sheets you get as "felt furniture gliders") to both make it easier to slide and seal off the air gaps to improve the vacuum suction.

@felixreali7101 Год назад

absolute genius!!!! thank you for sharing this.

@JAYTEEAU 6 месяцев назад

Excellent video. Clear instructions and very easy to understand. Thank you

@vladimirsp3484 Год назад

Отличная идея! Автору спасибо!

@viorsa8200 2 года назад

Excelente proyecto muy bien desarrollado y mejor ejecutado , un súper colector de aspiración imantado , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜

@cesargamez7384 2 года назад

Gracias por enseñarnos a aprender y regalarnos de su valioso tiempo maestro de Aguascalientes México Fransisco Gamez un abrazo muy fuerte y saludos cordiales bendiciones para usted y toda su familia 😊👍👍👍👍👍 👍👍👍👍 es usted genial

@bobmarske3103 2 месяца назад

Excellent plan . . . one gate to rule them all! What I like best is there is always an open gate. The biggest risk to a dust system is blockage in the system that could cause your dust collector bin to collapse, and which could easily happen if you fail to open a gate. Have you released plans or measured drawings? I think you would sell one or two. [I will probably use a template to make sure the stationary and sliding magnets line up.]

@RichieRich845 3 месяца назад

Simply brilliant 👍

@SGRblink 2 месяца назад

Genius sir , bravo !

@Nettle314 7 месяцев назад

Love this set up! I might make one myself. Have you got plans to those 3D printed connections? Cheers!

@littleB916 2 года назад

Great work! SImple plan, and great video. 🤙🏼

@fortissimoX 2 месяца назад

Great idea and realization!

@gnito72 Месяц назад

Really easy, great gadget, thanks for sharing !!!

@sitgesvillaapartmentneilsc7924 2 месяца назад

Thanks I can see why you have so many subscribers !! KISS love the idea and its something I think I will introduce in to my small house workshop, Thanks

@Rockmaster867 2 года назад

Finally someone with a realistic hobby shop!

@LH782 Год назад

A piece of felt glued to the slider part might help it to seal the vacuum better?

@vardenispavardenis2318 3 месяца назад

thanks for brilliant idea, some time ago i tried to design my own vacuum splitter but my idea was much way difficult . now i made new splitter with 3d printer

@shankarh6915 7 месяцев назад

Lovely build!

@garymorin4813 Год назад

I just finished building a simple cyclone dust separator, it works well, now how do I connect it to all my devices? I had just purchased a few pipe fittings, but this is far better and more elegant solution. Very impressed.

@edkinsel3553 Год назад

Pure genius. Cool as hell.

@treepop1550 3 месяца назад

Great idea and execution!!

@Dingbat217 Год назад

That's a great idea, I'll have to make one too! Thanks for sharing! 👍

@davidmcgrath6507 5 месяцев назад

Brilliantly simple!

@chrisstaniforth5629 27 дней назад

Nice!! Great work!

@elvisdepaula8312 2 года назад

Muito bom show de bola 👏

@user-sc7ly8gs5s 2 месяца назад

Хорошая идея и исполнение, удобно.

@castlecodersltd 3 месяца назад

Very nice and simple. Always the best kind of solution. Thanks for sharing

@hasimarslan Месяц назад

I wish i have seen your video earlier purchased many adapters

@wernerpfeifer 2 месяца назад

Grandiose Technik!

@iRReligious 2 месяца назад

Love it! 👍👍👍

@gregvaneeckhout1877 Год назад

Very nice simple idea, I will be able to make some small changes but it will work great and saves me buying a bunch of blast gates and is much simpler.- thanks

@diyprojectchannel 3 месяца назад

A really cool idea. Thank you 🙏

@xinixxagnix201 2 года назад

Clean install, great job

@ozzietadziu 3 месяца назад

Brilliant!

@alexanderturl Год назад

Brilliant idea mate, really good job.

@dytonicmusic6583 Год назад

Game changer. Thanks for this. I’ve been trying to come up with a system for my bench for months. This is much better than the blastgate method.

@Spratlyk9 2 года назад

Very nice! Thanks for sharing. I'll make one for my shop.

@daxmakes 3 месяца назад

This is great. I've been thinking of making an Arduino-controlled system which detects which power tool is being used and automatically switches to the correct vacuum port.

@thedolphin5428 2 месяца назад

Great idea, nicely made, nicely presented. Well done.

@EpicSqu1rrel 2 месяца назад

This is amazing, going to do the same at some point. thank you.

@pfoxhound 3 месяца назад

Genius idea.🎉

@-PORK-CHOP- 3 месяца назад

This is one of the cleverest and simple builds to solve a big problem, great work, new Subscriber

@DonCarlione973 3 месяца назад

That was an awesome idea! Great job man 👍🏼👍🏼

@maciej9280 2 года назад

simply brilliant

@josephking6515 3 месяца назад

Pretty slick. 👍👍👍👍👍

@hectorcastillo7809 2 года назад

Excelente idea buen trabajo

@seananderson7087 2 месяца назад

Cool idea! I like the magnets, overall a good approach. I think another approach you could make, would be something similar to whole house vacuum cleaner systems, where only the one vent open has a direct line. Instead here you could just, use ball valves or something, at each machine, that way you don't have to remember which hole goes to which tool, and can easily be added onto, just everything connected to one main collector line.