Ortur Laser - Detailed Build Instructions in Less Than 15 minutes!

Подписаться 43 тыс.

Просмотров 36 тыс.

50% 1

In this episode, we will be providing detailed build instructions for the Ortur Laser Master II (see more here: ) and while this is the 20 Watt (input) version, the major of the build will apply to all versions (i.e. 7w/15w/20w) of the time. This is a step by build along video which will take you from start to finish!
Easy Link to Ortur Laser Master Manuals: diy3dtech.com/ORTUR_Laser_Mas...
Add-On ORTUR Laser Master 2, Laser Engraver Y-axis Rotary Roller Engraving Module :diy3dtech.com/ortur_rotary_ro...
Build Notes:
1. Read instructions (easy link to online manuals: diy3dtech.com/ORTUR_Laser_Mas... ) and follow all safety guidelines.
2. The acrylic on the newer verses seems to be thinker so the old 3D printed cable managers might not fit so look for an updated version on the Design Store ( designstore.diy3dtech.com/ )
Also be sure to check our Ortur Laser Resource Page: diy3dtech.com/ortur-laser-reso...
Our Preferred 450nm laser safety glasses:
Material for Laser Cutting:
Acrylic Sheets 6 Count 3mm: designstore.diy3dtech.com/Acry...
Diode Laser Lens:
Must have G8 replacement lens: diy3dtech.com/G8-Laser-Lens
Handy lens for thing stock: diy3dtech.com/G2-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: www.thingiverse.com/thing:448...
-Cable Management: www.thingiverse.com/thing:448...
-Laser Focus Knob: www.thingiverse.com/thing:448...
-Laser Air Assist: www.thingiverse.com/thing:457...
Other useful parts:
-9mm x 0.5mm lens barrel tap: amzn.to/3ld5CpA
-Slicone tubing for air assist: amzn.to/2Qd8xAh
-Small Air Compressor: amzn.to/3iZ5nfU
SVG Grid: diy3dtech.com/wp-content/uploa...
Ventilation Components:
-4 Inch Desktop Hood: amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: amzn.to/2OyhXp1
-4 Inch Blast Gate: amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: amzn.to/397sjWv
Preferred Control Software (LightBurn): lightburnsoftware.com/
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too:
Want to see what we are up to daily? Check out our regular RU-vid Blog posts at:
Please visit www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
/ diy3dtech
-Follow us on Tumblr:
www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
/ diy3dtech
Subscribe to the DIY3DTech RU-vid Channel:
RU-vid.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech

Хобби

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@treybaskerville5131 3 года назад

This is great. Although I have seen a few build videos on the Ortur LM 2, I will still watch your video, and I literally got mine delivered today. This weekend is gonna be a good one!! Thanks!

@DIY3DTECHcom 3 года назад

Glad it was helpful!

@TheAstriapo 3 года назад

@@DIY3DTECHcom Doing mine this weekend as well, thanks for the video...

@SoulRelaxationMusic 3 года назад

Hello, I would like to ask you a question... do you know if there is a board like the one from ortur or neje that support the S0-1000 but has a Z axis to? Because I want to diy a laser engraver but I want it to have the Z axis to for auto lowering at each pass in lightburn. Thank you for your time.

@GowsicS 3 года назад

Does the same air assist work for this model with the new laser for adjustment?

@tanyacharbury4728 3 года назад

Ongoing, I need to cut a lot of 4.1 mm corrugated cardboard for custom-made optimally-sized shipping boxes for my eBay business. The way I currently do it, there's a sharp rapidly-moving Xacto-style knife passing by, less than an inch away from my fingers many times a day, as a result. I'm wary. So I'm looking forward to trying this laser instead, for that. I've learned a lot from this, and your related relevant videos. Thank you so much for your detail-oriented, broad-coverage benevolent, creative work. I learned a lot, and I also feel less intimidated.

@georgechambers3197 3 года назад

I must agree assembly is very easy. I've had my 20W for a month and still haven't been able to use it, bad motherboard. I'm waiting for a new one to be shipped. Thanks for the video!

@DIY3DTECHcom 3 года назад

Thanks for commenting and finger's crossed for you and your new board!

@mpdemo77 3 года назад

Have you made any updates to the cable management models for this updated LM2 yet? I can't find any on the design store or thingiverse. Thank you for the video it made my setup super dimple compared to the factory instructions .

@jeffholmes9483 3 года назад

I also have an Ortur LM2 with the 20w laser but it does not have the fixed focus lens. I'm curious if I could purchase just a new laser module or if the fixed focus lens isn't worth the money. Do you happen to know the model number of the Laser module?

@PourMeAnother 3 года назад

I ordered one of these about a week ago, (seems to be taking forever, LOL) so excited to get it and start using it. Wonderful explanation!! Thank you!

@ORSurfbum 3 года назад

Where did you order from I got one within 5 days. And didn't pay for rush shipping.

@PourMeAnother 3 года назад

@@ORSurfbum Unfortunately I ordered it from GearBest...Best they are not. Because I inquired about my order, they completely cancelled my order. I ordered a different brand from Amazon 2 days ago and it was delivered today.

@ORSurfbum 3 года назад

@@PourMeAnother yeah I almost went with them then a quick Google search turned me away. I almost did Amazon but they wanted 200$ more than 3dprintersbay who I ended up choosing

@PourMeAnother 3 года назад

@@ORSurfbum I had to return my laser for malfunctions, thanks for the tip for 3dprintersbay, I just ordered one from them.!!

@rgw6rtrgw899 3 года назад

@@PourMeAnother what malfunction did you encounter? What were the problems, just asking as awaiting delivery and wish to know what to look out for . Thanks

@tombenton8397 3 года назад

I am considering getting an Ortur laser ver 2, but wondering which to get, the 15 watt or the 20 watt unit. Also they say it will work with window XP which I have an older lap top with XP. Will it really work and can I run LightBurn on that compueter? I really enjoy your videos, very informative. Thanks

@robertfielder8398 3 года назад

It looks like yours is similar to mine, including the new port and rearrange buttons. At least your buttons are labelled - there is nothing on mine. Plus, the upper button on mine turns the unit off instead of doing a reset, so I assume mine is a slightly older version of the new version (if that makes sense!).

@marknorman8309 2 года назад

I just got the Laser Master 2 and can not get it to work. when I turn it on, it will come to the front left and tries to keep going. I have never had a laser before. can you help?

@wildbillsworkshop3410 3 года назад

I'm curious as to if the lens on this can be swapped out and how different that is compared to the older focus ring version. Have you sorted that out? If so might be a good video to touch upon a how to. As usual, thanks for the great video and keep them coming. Edit - It looks like there is a slot on each side of the collar that holds the lens in place. Perhaps using those slots the collar can be unscrewed and removed. Then the collar barrel/lens can be removed.

@britty_Wills 3 года назад

I love your videos! Thanks for posting and answering so many questions I didn't even realize I had! What kind of mat is that you have it on? Do you use the laser with that mat still underneath, or just the wood below?

@ctk0305 2 года назад

Hi! I just bought a 20W to upgrade from 15W, however when i run it, there's no control over the fire output.. it constantly burning and does not follow the figure anymore.. it fills all over the leather

@johnarniel5271 2 года назад

how can i find website to copy files for my engrave testing. thanks sir

@randallpatrickc Год назад

Great channel - just found you. Can I ask if I can cut thin (3-6mm) white EPP foam?

@victoriag868 2 года назад

The end stop keeps moving when the gantry moves back and forth. Is it that the screw needs to be tighter or am I doing something wrong? 😟help

@mattschuetz3491 3 года назад

Why did you skip every part where you actually did the assembly?

@waynepaterson9367 3 года назад

Did you give up on changing the 30w module ? Was hoping to see the install b4 buying one myself.

@DIY3DTECHcom 3 года назад

Well that is a long story :-) there will be a video coming on that project in the next couple weeks :-)

@alkaholiks18 3 года назад

Have you tried engraving clear glass with this? I am looking to get the y axis attachment to do wine glass. Just wondering what’s your opinion if it’s worth to get the y axis roller.

@IronMan-yg4qw 3 года назад

im wondering, since the neje 40 watt is sold out, if i should/could, buy a 7 watt ortur laser and put a neje 40 watt module on the ortur.

@DIY3DTECHcom 3 года назад

Its a bit of a pain, I filmed a status video on this yesterday which I will drop in a week or so regarding this project...

@IronMan-yg4qw 3 года назад

@@DIY3DTECHcom the ortur 7 watt has to small a working area. ebay has engravers with big working area. like 20 in x 19 in without the laser and controil board, for $122 appx.. but the brands are unknown. i dont know if the neje 40 watt will work with them. i wish you try those. :)

@bru77o 3 года назад

I'm seeing some changes already, my LM2 20W didn't come with that z axis slider, the lens is also diferent. Question: since it already comes with that slider, the work space is still 400x430?

@DIY3DTECHcom 3 года назад

Same work space this is the Jan 2021 model...

@bru77o 3 года назад

@@DIY3DTECHcom I'm glad they updated their model, but I not Happy with the machine and accessories I got. I have a few things to sort out. Cheers.

@flatlanderbackpacking7181 3 года назад

Mine was delivered by Amazon last week. My 20w laser does not have the adjustment knob like the one in your video.

@DIY3DTECHcom 3 года назад

This is the newer stock version...

@stevomv304 3 года назад

@@DIY3DTECHcom The 400?

@commanderfox5020 3 года назад

Hello, can this cut clear acrylic? or only pigmented acrylic sheets?

@DIY3DTECHcom 3 года назад

No they must be a dark color...

@commanderfox5020 3 года назад

Do you plan on installing the 7.5W laser module onto the Ortur?

@DIY3DTECHcom 3 года назад

Well that is a long story :-) there will be a video coming on that project in the next couple weeks :-)

@eipperone5643 3 года назад

@@DIY3DTECHcom Hello, No one gives you the height from the laser to your workpiece. My Ortur 15W machine did not come with the cylinder for setting this distance. What is this distance in inches? Thank you

@Kenue76 3 года назад

@@eipperone5643 the one that just came with the one I've Ordered (aluminum solid round bar @ 0.630 in) Length is 1.145 in or 29.08 mm

@bobbyboy1962 3 года назад

Finally mine just arrived, it is the short adjustable lens 20 watt. what does it say on the top of the laser or the number on the side that is engraved or looks that it is. I am trying to verify that mine is indeed the 20. Ok enough typing i got me a laser to build.

@DIY3DTECHcom 3 года назад

You should have large driver for the 20 watt version

@bobbyboy1962 3 года назад

@@DIY3DTECHcom the driver is the top circuit board or the body. I cant relate it to a 15 as I dont have one. I noticed in your video that the number on the top on one of the components says 20 and the engraved number on the side has 20 in it. Can you compare those numbers for me. Your videos are a huge bonus for me.

@annettehicks7425 2 года назад

What type of mat do you have that sitting on? Is it heat resistant?

@nathanweitzman9531 2 года назад

Looks like a cutting mat for paper/cardboard/matboard to me. Cut resistant but certainly not heat resistant. I'd guess he has it there in the video because a little reference for scale is nice and all.

@ORSurfbum 3 года назад

I keep getting straight lines that are bowing or bulging imgur.com/a/EaL8vbR everything is tight and no slop. Any ideas?

@ORSurfbum 3 года назад

Top half of star is fine.

@Duxandbux85 3 года назад

Do you have an email to contact you? I recently purchased a ortur master pro 2 and have a few questions maybe you could help me with.

@jondoe5866 3 года назад

It's 2021 everyone has built a 3d printer. It's a kick in the face when some old dude think this is ok.

@otallono 3 года назад

Wow this is the least detailed video I've found of this assembly...

@vincentecabrera6728 3 года назад

You say detailed in the description but skip over details?

@MrFlashback2 3 года назад

Ordered mine three months ago, still waiting. Contacted supplier they have refused a refund.

@Chilcutte 3 года назад

The Dark grid makes a terrible backdrop for this the Tilt this back and thread this on was almost impossible for me to follow with the Black on Black in the video Please use something A diffrent color then what your working on future.

@PapaVentrex 3 года назад

Sadly You skipped the first part I don’t understand.

@jurgenbergman6887 3 года назад

Awwwww.... I have not gut mine jet....

@DIY3DTECHcom 3 года назад

Finger crossed for you :-)

@duckhunter109 2 года назад

This video is not very useful. Does anyone have a link to a video that actually shows how to assemble it and does not skip over the difficult steps? Thanks

@rovpilot1 3 года назад

Background is confusing

@jondoe5866 3 года назад

Hey Skip intros and jokes. Stay on topic. You have a funny voice.

@Tamelascraig 3 года назад

You leave a lot of steps out of your instructions. This is very hard to follow.

@markeastmond9748 2 года назад

Half of this video is simply saying "assemble this" but you never show the actual assembly - just cut away and come back and its done. This would be far more valuable if the actual assembly was shown. As done it is not really much more help than the printed instructions that also do not show any detail.