No video :(

Oster fast feed clipper repair

Подписаться 11 тыс.

Просмотров 40 тыс.

50% 1

My name is Nick George with Clouds Diamond Sharpening. I sharpen on a diamond sharpening wheel (grandpa made the wheels shape and figured out how to use the diamond process. that's so fine at 1500 diamond grit, that polishes your blade sharp. I fix any clippers that have parts available. I can sharpen any blade or scissor that can come apart. I sharpen convex, semi convex, chunkers, thinning, fabric, surgical, and little scissor at a fair price.
Check it out on my website www.diamondedg...
Call me at 682-559-7558 to use my services. Please leave a message if i do not answer.
Email : diamondedge2015@gmail.com
Facebook : Clouds Diamond Sharpening
Google+ : Clouds Diamond Sharpening
Instagram : Cloudsdiamondsharpening
Twitter : CloudSharpening (i'm horrible at using)
#cloudsdiamondsharpening #Clipperblade #Clippersharpener #professionalsharpener #diamondsharpener #scissorsharpener #shearsharpener #Clipperservice #Barber #animalgroomer #hairstylist #scissors #oster #wahl #laube #andis #buttercut #Sharpening #wolff #kenchii #haircut #clipperrepair #Trimmersharpener #Review #clipperreview #professionalclipperrepair #professionalclipperbladesharpener #Clipperbladesharpener
Aces High - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@harrisonholbrook3641 3 года назад

Hey when I turn on my fast feed it sounds really quiet. Blades don’t really move. But engine is making some noise. Nothing has happened to it-two years old and only used 20 times. Looks brand new. Any idea of what happened?

@cloudsdiamondsharpening3973 3 года назад

Hello. If it was not dropped then the field is probably fine. The blade might be seized up you need to break it free with your fingers. Break Free the cutting blade is the one in between the big large comb blade and the clipper. Oil it and if it still does not work then one of the magnets broke off the Armature and is now wedged into the field. It might just be in the defective piece if you did not drop it

@Razor857 4 года назад

Can you do an in depth on how to install the grey bar. I just cant seem to get it in right.

@pyroRoy 6 лет назад

Question bro I dropped my fast feed on accident it landed on the blade no chip but when I turn them on they sound loud they still cut but they are loud than before does it mean the magnet got close to the motor do I need to push the magnet part up with a flat head like you did?

@cloudsdiamondsharpening3973 6 лет назад

RoyTheTrillest hello. I have no idea unless I look at it. Something could be loose or the spring broke or you just need the blades sharpened. The blade could have a knick on the running surfaces causing noice.

@pyroRoy 6 лет назад

Cloud's Diamond Sharpening the blades are fine it just when you turn them on it makes that loud nasty motor sound but they still cut it’s just loud and annoying

@onexluv_ Год назад

great vid 👍🏽

@cloudsdiamondsharpening3973 Год назад

Thanks for watching!

@andrewheale9170 4 года назад

Bought my fast feeds and put in the ceramic blade. It didn't cut hair very well at all, pretty much pulled hair and barely cut anything. I then switched back to the stock blade and it's the same thing. Any idea?

@scarfusion3935 4 года назад

Andrew Heale I have the same problem for some reason

@andrewheale9170 4 года назад

@@scarfusion3935 I figured my issue out and they cut amazing... So with mine, when I took the stock blade out I also took out the small grey bar, that bar slides into the lip of that plate, I had simply put it behind the plate and not on the lip of it.... I don't know if that's confusing or not but that bar made all the difference. Hope that helps. That's what the problem was for me

@cloudsdiamondsharpening3973 4 года назад

It's possible the blade needs sharpening. Perhaps the blade guide fell off when removing the blade. Hard to tell from this end.

@chadn1435 4 года назад

Hey, I dropped my fast feeds and whenever I have the blade fully open the cutting blade starts making a rattling noise but when it’s closed it’s normal any idea what it could be?

@cloudsdiamondsharpening3973 4 года назад

It would be hard to tell what's causing the noise without seeing them. It definitely shouldn't be noisy in one position over another.

@calebsammons2660 5 лет назад

Is the tension guide (little plastic piece that clips onto the metal piece you bent) necessary to cut? Mine fell out and is now gone.

@kriticol3052 Год назад

everytime i put the lever open and close, it doesn’t look straight or aligned whenever i play with the lever, it looks like it’s not aligned or something . is there a way to fix this?

@cloudsdiamondsharpening3973 Год назад

It can normally be fixed. It all depends on what's causing the blades to be misaligned.

@kriticol3052 Год назад

@@cloudsdiamondsharpening3973 how can i fix it?

@cloudsdiamondsharpening3973 Год назад

@@kriticol3052 it depends what's wrong. If it's just the blade, you can adjust the comb itself to line up. Anything else will be a clipper issue, but not easy to say without seeing them.

@zinhodocorte5298 8 лет назад

essa máquina é da hora mano

@ItsNoe 7 лет назад

How many washers are suppose to be in the arm lever ? I disassembled the lever to zero gap and a washer fell out and basically I couldn't find it on the floor. So is one washer ok ? The lever seems loose even when tightening the screw

@cloudsdiamondsharpening3973 7 лет назад

Noe Murillo one washer is fine. it sounds like you lost a brass plate that goes between the blade carriage and housing so the lever don't move as easy.

@carlosxalmaraz5244 4 года назад

Can I send you my oster fast feed to you? , the lever broke because I dropped my clipper now the blade doesn’t moves up and down

@theprivateclublacuts5087 7 лет назад

love your channel , is there any way i can install a wahl cordless battery, on a fast feed to make it a cordless fast feed, is that possible?

@cloudsdiamondsharpening3973 7 лет назад

5150Cuts hello. you can do it but it won't be worth the money. you will need some kind of pcb that would convert a.c. to D.C. or get a D.C. powered motor and make motor mounts. This clippers is a.c. so a battery wouldn't work alone and you would need a pcb to charge it or take it apart every time to charge directly. In glad you enjoy my channel and thanks for watching.

@theprivateclublacuts5087 7 лет назад

thank so much brother keep up the good work your channel is so helpful i subscribed and liked most of your video that helped me out. i have a question, do you have a video on installing a wahl cordless battery on the fast feed ,or can you make one. i seen a video that actually explained witch is were i got the idea of it but i can't find the video.i really want to do one for myself . thank you .

@cloudsdiamondsharpening3973 7 лет назад

5150Cuts np. I'm glad you enjoy my channel. I'm sorry I can't make a pcb or a battery. You'll need to do a lot of home work. First you'll need to get the power input and then find a battery for the same power. Then find a pcb to convert a.c. to D.C.. Then find a rotary motor that's driven by the battery. Then you me a transformer to charge it. Plus a switch to turn off. You'll need a 3d printer to print a motor mount to mount the motor. Or just buy a Wahl bravura cordless they are nice. They are for animal but will work great on human hair.

@thenotorious2322 4 года назад

Is it okay if I crazy glued the inside of the ceramic blade so that it doesn’t get loose when I’m cutting hair? Will I damage the clipper?

@cloudsdiamondsharpening3973 4 года назад

You glued the ceramic cutter to the guide? When it goes dull you'll just have to probably replace the parts.

@bobbyalatrach5826 3 года назад

Helppp! A barber I know gets his fast feeds to crunch really nicely, almost like andis masters and I’m not sure how. He uses a fine 25 tooth blade on his fast feeds. I use it too but I still can’t seem to get it to do that nice crunching noise. How do you think he did it ?

@cloudsdiamondsharpening3973 3 года назад

Use oil and keep your blades sharp.

@ExtremeKBdotCom 4 года назад

When I was taking it apart, a small copper piece came out and I have no idea where it came from or how to put back. The unit when turned on just makes a slight hum and not movement on the blades. I took the blades out to sharpen and now the entire unit doesnt respond. Any suggestions?

@cloudsdiamondsharpening3973 4 года назад

The small copper piece goes underneath the blade carriage and most like that is what the humming sound is from because its a magnetic motor and probably stuck inside or the spring is broken inside

@cm2191 4 года назад

Cloud's Diamond Sharpening hi, my small copper piece came out as well and I’m having a hard time visualizing where it goes. Could you help in anyway?

@ExtremeKBdotCom 4 года назад

@@cm2191 Outside side part of the clipper unit. Hope this helps.

@kingdevine7374 2 года назад

I have a pair that all loud what could be the issue it...it sounds like or as loud as yours did without ther blade None of the internal are broken

@cloudsdiamondsharpening3973 2 года назад

Hello. Something's broken if it's loud. It's most likely the magnets on the armature that are hitting the field. Or a spring is broken

@kingdevine7374 2 года назад

@@cloudsdiamondsharpening3973 I pulled everything of The springs not broken. I did notice the magnets hanging up time to time when I turn the clippers on. It's like when I first use them they are quiet then they get loud....today after usage they went to a quiet hum... then got back loud.

@kingdevine7374 2 года назад

Would the magnets just need replacing? Cause I do smell a burning or hot magnet smell during usage

@cloudsdiamondsharpening3973 2 года назад

@@kingdevine7374 it can be replaced. And probably will need to be but I can't diagnose over the internet so I'm not 100% sure

@kingdevine7374 2 года назад

@@cloudsdiamondsharpening3973 tru indeed thx

@MrEricksen78 3 года назад

Hello, For some reason my fast feet with the blade is open has a tendency to pull the hair how would I be able to fix this

@MrEricksen78 3 года назад

It happens with a ceramic blade as well as the regular blade it comes with

@cloudsdiamondsharpening3973 3 года назад

@@MrEricksen78 hello. both sides have to be sharpened for it to cut correctly. Usually just buying the cutter won't do it

@Dlewis77777 3 года назад

Are there differences between the fast feed blades? Like 76913-506 and 76913-536

@cloudsdiamondsharpening3973 3 года назад

Good question. Usually, one will have more teeth than the other. I believe they define them as "fine" and "medium."

@nvinha301 6 лет назад

Hello, do you know if you can install a Oster 616 motor (220V/50 Hz european plug) on a Fast Feed? The motors look exactly the same and the case on the 616 looks like it has the same holes for the screws. If you have an old 616 motor, can you install on a Fast Feed? Thanks

@cloudsdiamondsharpening3973 6 лет назад

Nuno Vinha hello. No I'm sorry. I can only get 110v parts, I'm in texas. You will need look where ever they sell parts for 220v or buy a converter box.

@nvinha301 6 лет назад

I have the 220v motor (from a Oster 616) but I was wondering if I could buy a regular Fast Feed and change its motor myself (and the cord, while I´m at it). I just don´t know if that can be done.

@cloudsdiamondsharpening3973 6 лет назад

Nuno Vinha it won't be worth the cost by then. You might as well buy a new one. If you still want to get the part then you will need to look up an Oster distributor in your area. I do not sell parts, I repair them.

@TheindefatigableGovernor 3 года назад

At 3:33 what type/brand Phillips bit is that. Thanks.

@cloudsdiamondsharpening3973 3 года назад

Milwaukee

@TheindefatigableGovernor 3 года назад

Thanks

@youngthomas04 5 лет назад

My open and close adjuster switch doesn't work. Is there anything I can do

@cloudsdiamondsharpening3973 5 лет назад

You can buy a new arm from an oster distributor

@youngthomas04 5 лет назад

@@cloudsdiamondsharpening3973 thank you. Do you know of any online distributors I can purchase from?

@youngthomas04 5 лет назад

@@cloudsdiamondsharpening3973 is there an instructional video on how to replace the lever or its pretty easy to do without a video?

@travonconey 5 лет назад

IDK what's wrong with mine.i turned it on it doesn't buzz or cut but I can feel a small vibration in it tho

@cloudsdiamondsharpening3973 5 лет назад

Either the springs are broken or missing or the aremature is hitting the feild.

@travonconey 5 лет назад

@@cloudsdiamondsharpening3973 thank you and another question do you know if it's possible to order the little foam part inside it?

@cloudsdiamondsharpening3973 5 лет назад

@@travonconey probably not but you can use a soft sponge or just don't worry about and clean your clippers every 6 months. It's not really that important

@travonconey 5 лет назад

@@cloudsdiamondsharpening3973 okay preciate it man, you earned yourself a new subscriber👍

@alexanderreyes3356 4 года назад

Hey man cleaned out my fast feeds today but upon reassembly they sound really loud all of a sudden even though I oiled and lubed them can you help?

@cloudsdiamondsharpening3973 4 года назад

When you remove the blade, there is a brown plastic piece (blade guide) that rests along the drive that guides the cutter. Is that piece still there? It's very common to lose it.

@alexanderreyes3356 4 года назад

@@cloudsdiamondsharpening3973 Yea it's there. The whole clipper sounds as loud as when you have both blades dissaembled so I don't think it has to do with the blades.

@cloudsdiamondsharpening3973 4 года назад

@@alexanderreyes3356 if you'd like us to look at it send it over to us. We offer free estimates on clipper repair. For more detailed information, visit our website at Cloudsdiamondsharpening.com

@Mamacita_BABIIE 6 лет назад

Can you just take the inturnals out a magic clip and stick it in a fast feed

@cloudsdiamondsharpening3973 6 лет назад

Hello, You cant on a cordless Magic Clip because it is a rotary motor that is DC powered. The AC corded model you can not either unless you drill holes into the housing and remount the motor and remount the armature. it might be able to be done but it wouldnt be worth the time to do it. Thanks for watching

@br3tzky331 4 года назад

Hey man, I blew the motor on my fast feeds. Do you know where or if I can find a replacement motor?

@cloudsdiamondsharpening3973 4 года назад

There are several distributors for Oster parts. I would just Google "Fast Feed replacement motor"and see what you can find.

@br3tzky331 4 года назад

@@cloudsdiamondsharpening3973 Thanks, I have been researching online but will continue. I found a service company on their website who is checking as well.

@xHibachi24x 8 лет назад

I saw ya rated the Wahl Seniors a 10/10. What would you rate these?

@cloudsdiamondsharpening3973 8 лет назад

it would rate good. it has all part available but there not very powerful.

@michaelchahin411 4 года назад

Hello, Are you still servicing clippers? if so Please let me know thank you

@cloudsdiamondsharpening3973 4 года назад

Yes, we're still servicing clippers. Check out "Clouds Diamond Sharpening" on Google and feel free to contact us by phone or email for more information.

@BigHeadAdrian 7 лет назад

Is there any way to fix a stripped lever on these?

@cloudsdiamondsharpening3973 7 лет назад

Adrian Hernandez yes all parts available.

@chanroeunpol8246 8 лет назад

I tried sharpening my speed master blade on a sharpening stone,and it started pulling hair,can you fix that?

@cloudsdiamondsharpening3973 8 лет назад

probably not. I recommend buying a new blade.

@itznolan215 8 лет назад

+Cloud's Diamond Sharpening I barely grinned it

@itznolan215 8 лет назад

+Cloud's Diamond Sharpening you recommend a ceramic blade over a regular blade?

@cloudsdiamondsharpening3973 8 лет назад

+nol FromPhilly ceramic are good to reduce heat . I probably sharpen your blade but I recommend buying more blades instead of sharpening bc shipping cost won't be worth one blade.

@itznolan215 8 лет назад

Yea true,how much total?

@randyramcharitar5793 6 лет назад

If my spring broken at the end what to do

@cloudsdiamondsharpening3973 6 лет назад

Randy Ramcharitar you'll need to find an oster distributor on Google and order a spring for it.

@3AsianBoi 7 лет назад

Hey, so my oster fast feed adjustable lever thing is broken, you know anywhere I can purchase a new one? I see it on usa for like $0.50 to like $1 but none ship to Canada :/

@cloudsdiamondsharpening3973 7 лет назад

3AsianBoi I'm sorry. I don't know how to help you.