Just had to do this when my andis ceramic blade had a slight high point in the middle of the blade. Now I’m just using the stock blade with this mod, thanks bro. 👍
Out of all the videos I watched to perform this zero gap operation, this was by far the best! Please consider doing a video to replace the metal moving cutter blade with a ceramic blade.
What would happened if the two screws holding the metal plate that you cut got loose from usages? Would the metal plate move up with the cutting blade and cut you?
I should have done this instead of getting the Andis ceramic blade. The andis blade is wider and you will not be able to use your oster guards. The blade will hit the guards making them loud and unable to cut as good. No one tells you this in all the zero gap videos. Fast feeds with the andis ceramic blade is good if you plan to just use it to fade and not use any guards.
If you zero gap with an Andis Course Ceramic Blade, you should pick up a set of Andis Master DUAL Magnetic Comb Set. They are better comb set, in my opinion. Just make sure they are the purple, DUAL magnet jawns. Andis does also sell purple, SINGLE magnet combs. I have zero gapped Oster Fast Feeds both ways and both ways work great, it comes down to preference.
Deon 0026 He’s saying, you DON’T need to do this. Just buy a ceramic blade. Then, there is no need to do all the stuff you just watched in the video. Good luck though.
It saves you the labor of doing the mod and in my opinion the blends come out much more smoother with the ceramic, especially with the Andis Medium Cutter blade
The Oster Fast Feed has been around forever. It's hard to believe that Oster doesn't sell a piece that is already channeled and relies on the user to fabricate it themselves. Don't get me wrong. I appreciate the tutorial video but Oster Inc. has to do a better job here.
