No video :(

Out for a valley ride

Подписаться 112

50% 1

Out for a ride with Ian with a changed rear sprocket for the hill climbs, a modified cross over in the right hand fork base valve and a poxy new/old front tyre.
Two stacks from two on the same rock and won't be using the MX33f as it isn't suited to the terrain I ride, even though a mate loves them.
My valving is good now for the forks and a tweak to the shock high speed compression adjuster had the bike working really well today.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@dirtbike_viking 5 месяцев назад

Thats some nice single trail there mate. Have you tried playing with the tyre pressures and suspension to get more confidence out of that front tyre?

@Ridersofthelostpath 5 месяцев назад

Not tyre pressures but the suspension has been dialled in for the area. I ran 13psi in the 53’s and did the same for the 33’s. I’ve got battlecross x31’s on now and 13psi seems like a good pressure on them so far.

@philipsmith6152 5 месяцев назад

Great vid, is that a 250 or 300? I didn't like the 53 front, it used to knife in a lot, the 33 seems to work better. looked like some good tracks too 👍

@Ridersofthelostpath 5 месяцев назад

I’m on a 250 Philip. I am also running tubes as the 53 was not so nice with the mousses i was running. I found that 13psi is a good pressure for the 53 front. No dunlops at the local shop so onto a bridgestone 31f which i used to love. The 250 has had a Two Stroke Performance low compression head and ECU flash done too.

@user-je2kh7px1f 5 месяцев назад

Loving the vids, I used to run Dunlop- but I’m loving the Michelin now

@Ridersofthelostpath 5 месяцев назад

@@user-je2kh7px1f starcross 6? I used the 5’s but they wore quickly for me. Good when they were new. The bike came with the mitchelin enduro 140/80 and i did like it to start with but the low knob height made traction tough in the pea gravel.

@user-je2kh7px1f 5 месяцев назад

Yeah mate running the Starcross 6, and really like it. Similar to you I really liked the enduro 140/80 and the enduro steer- might even give the another go when it gets wet again 👍

@michaelr119 5 месяцев назад

Hey nice video mate, what type of clutch is that if you dont mind me asking?

@Ridersofthelostpath 5 месяцев назад

I bought a clake clutch, One Light Clutch i think it’s called. It was expensive but it can be taken to my next bike. I was using a midwest engineering clutch lever which was good on my beta but the clake is next level easy. The midwest lever is dependant on the clutch master brand.

@michaelr119 5 месяцев назад

@@Ridersofthelostpath Ah i dont mind the price if it feels nice and light, thanks for the reply

@Ridersofthelostpath 5 месяцев назад

@@michaelr119 i had to buy the longer hose too as i didn’t want to then find the hose was too short when i got it. A little bit of a pain to bleed it but been great ever since.

@michaelr119 5 месяцев назад

@@Ridersofthelostpath Ok good to know i might just get the longer cable as well just to be sure

@Ridersofthelostpath 5 месяцев назад

@@michaelr119 i rang the bloke but the longer hose comes as a universal hose where it has the two banjo hose fittings for either 8mm or 10mm bolts. He was pretty good to talk to.