outfeed extension for portable DeWalt job site woodworking table saw

Подписаться 74 тыс.

Просмотров 89 тыс.

50% 1

Creative, easy to make, install, and remove accessory for DW745 DeWalt portable jobsite woodworking table saw. An outfeed or extension table is one of the most important beginner safety accessories you can have for your tablesaw in your woodworking shop. This project will make your table saw safer and easier to use.
Amazon Affiliate links
Folding framing square amzn.to/2qrIThN
Digital caliper amzn.to/2PiGfDD
Compass amzn.to/34XDcHj
Combination square amzn.to/2RrfMGw
Tape measure amzn.to/2RnN75j
Forstner bits amzn.to/2sTKQVd
Bosch Jigsaw amzn.to/2PglV5K
DeWalt 20V drill Dirver kit amzn.to/2tizlac
DeWalt Job Site Table Saw amzn.to/2LutpB3
DeWalt Rolling saw stand amzn.to/2PjU5Wm
DeWalt Double Bevel Sliding Miter Saw amzn.to/2YoWdzZ
Drill Press amzn.to/2OXTdaJ
#2 Pencil amzn.to/2sNM04s
House Doctor Ray Amazon Shop
www.amazon.com...
As an Amazon Associate I earn from qualifying purchases. Using the links provided does not in any way increase the cost to you, however any income I get from them helps support my channel...thanks
To subscribe / @housedoctorray
Inspiration: • Installing the dewalt ...
Get your House Doctor merch here: my-store-11615...
HouseDoctorRay...

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@steveiv9250 4 года назад

Great job, only thing I would change is to have the entire table come off in one piece and the the supports to fold in toward another. But awesome job and insight.

@HouseDoctorRay 4 года назад

I considered folding supports but would've required more engineering to make it stable. I may redo it with the brackets I used in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cmLV79vKHAQ.html

@kuehnel16 10 месяцев назад

I have this saw and it's a good saw . Just wish it could not be so loud.

@HouseDoctorRay 10 месяцев назад

Try a different blade. The laser cut Diablo blades seem to run a little quieter. They definitely cut better.

@mercerino 2 месяца назад

Great video. I have a similar saw and similar need.

@Jack-es9xq Месяц назад

Nice three part design makes for easy storage

@tony3803 Месяц назад

Te las recomiendo

@MarktMorris 3 года назад

Brilliant! Before I make my all-singing, all-dancing outfeed table/work bench masterpiece, I really just need a simple outfeed table and this fits the bill perfectly! I know what I'll be making this weekend!

@qmoonwalker3847 2 года назад

This is perfect! Simple and effective! Like how you keep it wider than the table saw width. I see in comments you have a link of what inspired this. Will check that out and watch your video a few times. I’ll be building this one! Thank you!

@HouseDoctorRay 2 года назад

Thanks. Makes the saw much more useful and safe. Thanks for watching.

@bazinet15 Год назад

Awesome. Exactly what I’m looking for. I don’t have enough space for a permanent structure. This will work great!

@HouseDoctorRay Год назад

Glad you liked it.

@elefja1 Год назад

It always blows me away how creative and innovative people can be, great design!

@HouseDoctorRay Год назад

Thank you.

@sheepdog819 4 года назад

You should consider making a couple more and selling them on Etsy. I know I’d throw you some cash.

@HouseDoctorRay 4 года назад

Not sure I'm ready to step into that world. Huge liability issues especially with table saws.

@tednye8236 3 года назад

That is one of the best extensions I have seen on you tube. Thank you

@HouseDoctorRay 3 года назад

Thanks. Much better than bending over to pickup your pieces.

@pa.fishpreacher6166 2 года назад

Any idea why my stock pc. keeps getting stuck in the antikickback feature?

@HouseDoctorRay 2 года назад

Sorry I don't know.

@blstewart001 7 месяцев назад

very interesting system. I like how you didn't have to drill into the saw's frame or you table's stand.

@HouseDoctorRay 7 месяцев назад

Thank you, it's very handy.

@nobrand7957 2 года назад

Very impressive, but I don't have or can afford the thousands of other tools you used in this project like drill press, sanding belt, band saw, jig saw, etc ....

@nobrand7957 2 года назад

I had to do a cheaper alternative. Bought a 4" x 2" pvc folding table from Office Depot ($39). To raise the table, bought heavy duty pvc pipe (1/2") and cut into 4 12" pipes ($5). Pipes slide over the legs to raise my table up to near even with my table saw. Table is about 3/8" below table. To hold my table tight against the table saw, I use two (2) 12" zip ties ($1). When not in use, table folds up. I use painter's blue tape to affix PVC pipes with my folded table. My table works great. It takes me about 3 minutes to assemble for use. All cut wood slides off the table & lands gently on my pvc table.

@HouseDoctorRay 2 года назад

Great idea.

@HouseDoctorRay 2 года назад

You don't have to have all those other tools. A hand drill and sandpaper would work and you could use a $5 coping saw to cut the notches.

@Nebx1989 2 года назад

Thanks, super helpful. I wouldn't mind dumping a bit of money on something like this, but I really can't find anything. Gues I'll have to rewatch this a few times and do it myself.

@HouseDoctorRay 2 года назад

There is a link in the video description to an Instructable that is a little different but has more detail.

@leftykelly3944 2 года назад

Great design! I need to figure out something like that for my new SKIL. Thanks for the video!

@HouseDoctorRay 2 года назад

Thanks for watching

@Letsroll000 11 месяцев назад

Great vid and idea, was tossing around ideas in my head as well, thanks for sharing.

@HouseDoctorRay 11 месяцев назад

Thank you and thanks for watching.

@efunkyman6853 Год назад

By far, this is my favorite outfeed table design. It is easily removable and stored flat. Great job!! I'm off to view the video of what inspired you because I have to make this! Thank you!

@HouseDoctorRay Год назад

Thanks.

@Nedswoodworks 2 года назад

Great out feed attachment, eliminates the need to build a whole outfeed table aye….I’m definitely going to give this a go when I buy my new table saw…thanks..

@HouseDoctorRay 2 года назад

Glad you found it useful.

@weekendwarrior9570 Год назад

excellent video and process. thank you for sharing.

@HouseDoctorRay Год назад

Thank you and thanks for watching.

@ligngood3787 4 года назад

Wow, what a fantastic job! This is exactly what I was looking for for my new saw! Simple, removable, and highly portable! Thank you so much!

@HouseDoctorRay 4 года назад

Thanks. Glad you like it.

@djschreier8161 4 года назад

This is amazing. I would love to duplicate this. Do you by chance have plans written for this or did you just wing it.

@HouseDoctorRay 4 года назад

I'm glad you like it. It definitely makes the saw safer and easier to use. Unfortunately I don't have plans. I just winged it. I got the inspiration from this link. www.instructables.com/id/Outfeed-Table-for-Dewalt-Table-Saw-for-10-includes/ I just made it a little more simple.

@donaldduke2233 4 года назад

FANTASTIC VIDEO ! ! ! Thanks for sharing this great idea.

@HouseDoctorRay 4 года назад

Glad you like it. Please share with others.

@kuehnel16 10 месяцев назад

👍

@HouseDoctorRay 10 месяцев назад

😁

@thesplintermaster3326 4 года назад

Great idea...will it hold up to the weight of a longer 2x6?

@HouseDoctorRay 4 года назад

It'll hold the weight but not the length of an 8 footer.

@mfrutchey 3 года назад

Great outfeed table. Exactly what I need for my Dewalt saw.

@HouseDoctorRay 3 года назад

It definitely adds to the functionality of the saw.

@Mofareig 8 месяцев назад

Good job 👍🏾

@hugsncuddles 3 года назад

Song music name/author please?

@HouseDoctorRay 3 года назад

It's under RU-vid royalty free. Title is 'Fresh Fallen Snow'. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7baoMPvGfrU.html

@hugsncuddles 2 года назад

@@HouseDoctorRay Thank you kindly Sir!

@slawyer711 3 года назад

Where did you get that drill press clamp?

@HouseDoctorRay 3 года назад

Found it at a Habitat for Humanity ReStore for $1. Mine is by Vise Grip but this is similar: amzn.to/3qEvBYq Super handy.

@slawyer711 3 года назад

@@HouseDoctorRay Thanks!

@johnpetrea 8 месяцев назад

Dang awesome!!! 👏

@HouseDoctorRay 8 месяцев назад

Thanks John.

@kdc300z 3 года назад

Excellent!!

@johnjohnoj6408 2 года назад

Good job friend

@HouseDoctorRay 2 года назад

Thank you.

@lezbeon 4 года назад

Spectacularly simple

@HouseDoctorRay 4 года назад

Glad you like it. It doesn't need to be complicated to get the job done.

@crisancosmin19 3 года назад

Hi! What song is that? It's amazing! Love the outfeed table, too.

@HouseDoctorRay 3 года назад

I found it in the RU-vid library of copyright free music, "Fresh Fallen Snow" ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7baoMPvGfrU.html

@jasonreed200 3 года назад

Great idea!!!! Do you have a dimension sheet for this you are willing to share?

@HouseDoctorRay 3 года назад

Thanks. I stole the idea and put my own twist on it. In the video description you will find a link to where I got the idea and to the tools I used. Just hit the down arrow on your phone \/ or 'more' on your PC. The original video has links to an instructable with dimensions.

@dominodoggy1 4 года назад

I love the idea but I'd want an out feed table to come flush to the back edge of the table saw. I would cut a relief on the underside of your platform so it can be pulled tight against the back of the table saw. I would not want any gaps.

@HouseDoctorRay 4 года назад

Can't be flush on this saw because of the way the fence attaches.

@dominodoggy1 4 года назад

House Doctor Ray ohhhh no you done said the word can’t. :p