Packbrake Oil Filter Relocation Kit - Ram Rebel  

I made an upgrade to this kit and Packbrake was gracious enough to provide me with the fittings I replaced the 90 degree fittings with 45 degree nipples on both for best oil flow I was told 90 degree fittings will greatly reduce oil flow.

Definitely can't wait to see this installation, I already have the Fumoto value. This will be the final piece to make all my oil changes less messy.

I might do this down the road. For now, I just picked up an Oil Utter that I'll use for the next few oil changes, then decide.

I installed this kit at 1000 miles super easy oil changes now great video

I added this to my 2015 Ram Sport after changing the oil 1 time. Even with the plastic bags or form-able funnels it was a mess. Yah, it's pricey, still oil changes are a breeze and clean.

They are also available for earlier years (2009-2018). I admire how clean the underside of your truck chassis is, mine is covered in Fluid Film!

Can’t want to see this. Been waiting to do it to my Rebel. Maybe now you can use the SRT filter as well.

Just installed on a 2022 Ram 1500 Limited. Thanks for the help on the video. Made the job go a lot quicker and easier. Certainly a better setup for changing the oil now. Oil pressure at 46-50psi and no leaks. Very nice quality on the parts. Hopefully it does not develop a leak down the road

I took it 1 step further and added a Hubb oil filter then went to an aluminum welder and had him weld in an Aluminum 1/8" alum weld bung for a 1/8" magnetic drain plug why? To make it easier when you remove the oil filter there is oil in the hoses and block that need to drain as well having the drain plug eliminates more mess to deal with and hot oil all over your hands while it's draining I have a second filter filled and ready to screw on. Another advantage I noticed by accident with the Hubb Filter for 5.7 Etorque is, for example, your braking slowing down for a traffic light then the light turns green when you hit the gas there is a jerky action from the trans looking for the right gear to be in, now with the 55 gallons per minute flow and I assume back oil pressure the trans knows what gear to be in for a smooth transition for acceleration its always in the correct gear now instead of being 1 or 2 gears too low or 1 gear to high I also noticed when slowing down for a turn when I come out of the turn and accelerate I'm in the correct gear making for a smoother ride no clanking under these driving situations I'm not an engineer or mechanic it's just a nice side effect of this combination. FYI I posted photos on Facebook and a mechanic said you should have 45-degree fittings on the filter housing to reduce more restriction of oil flow. I contacted Pacbreak and they were very helpful and sent me two 45-degree fittings customer service is great. Pacbrake 5-star👍Great video

Can you please do a follow-up video with the cons if there are any in the future. Thank you in advance for your time.

I think I’m gunna have to get this. The gallon bag trick is getting a little old.

Awesome video as always!! Well done 👏🏻👏🏻👏🏻

Thanks. Great video.

Has anybody ever noted the before and after oil pressure ?

The crocs 😂

how do I get an overtightened relocator off? its way to tight to get off by hand and since its just circle I cant use an oil filter wrench on it

I am installing a similar dual filter kit on my 21 1500 classic. Great video.

Enjoyed the video. Underside of your truck looks so clean for a midwestern vehicle! Do you pressure wash regularly in the winter or use another method to fight corrosion?

I just bought 2024 Ram 1500 Limited. I would love to install this add-on to my truck. But, with this void my warranty?

Great video, man. Thank you! Any issues in the couple months since installing?

ooh I need one

Awesome vídeo man. Need it to do on mine also. Very detailed information. Any problems with pressure and leaks? Thankyou

Cool 😎 !

Water Fowler the 🐐🐐🐐🐐

Great upgrade! Did you find if it takes any more oil than the 7 qts that’s recommended?

Good video

Mine started to leak a little bit after 3-4 years installed. I have seen nothing in my driveway and just a small drop on the housing itself, maybe it's only leaking under pressure when engine is running. Looks like it's coming from the big seal (blue part that replaced old filter). Hopefully I can retighten everything and it'll be ok. I refuse to go back to OEM filter location changes.

Good set of how to's. I wanted to as you, to relocate the stoopid idiot engineering location of the OEM oil filter. Pacbrake was not available for me when I began to relocate my setup. I opted for the usual kits that were out there the past two yrs. First setup was totally useless, the Derale kits, rubber lines on aluminum fittings with a hose clamp, really? Even though cruising speed for my 1500 at about 75-80 mph, oil PSI was 53-55. The damn hoses still leaked. Kicked that to the curb, the next one, had actual custom oil lines made, very similar to the Pacbrake lines, found another setup thru Summit racing, seemed to be better engineering components, same problem, oil leaked pas the elbow fittings. My intentions were good, at first, I was able to fit a bigger filter as well, thinking more oil to filter etc. I haul a race trailer, I usually chge the filter out between the usual chgs, its cheap, and of course easy to get too. Now that Pacbrake is available, gonna get one thxs

This looks like a great upgrade. Im curious, if your oil temp would drop a litttle, seeing as cool air is now flowing around the filter?

Does it make the hemi require more than the 7qt of since it adds more lines for the oil filter system?

Can you make a video on the bed lights?

Use 0w40 oil

How has it been since install? My main fear are the hoses rubbing from vibration.

Not on the website anymore

Not worth it mine leaked after 1.5 oil changes. 3 qt low on oil and oil everywhere underneath. All the hose end are rusted out not even winter yet. Wish i can get my money back.

Whats the serial of the Mopar Oil Filter?

Would you worry about this if you do some mild to moderate offroading?

I just installed this kit and I’ve noticed a 6-8 psi drop in pressure while at load. Have you noticed anything similar? (From 52 psi to 44 psi.) No leaks.

Can't seem to find this available anymore. Does the addition of something like this void/affect a warranty?

I get the impression that this will void any warranty the vehicle may have.

Know off hand the size wrenches?

Will this void warranty?

Have you run across any issues with this yet?

How has this Pacbrake held up after 7 months. Any issues? Oil leaks?