No video :(

Paint your car with less overspray!

Подписаться 67 тыс.

Просмотров 9 тыс.

50% 1

This video is all about helping the hobbiest or diy guy to reduce overspray when auto painting in a garage. Some simple techniques and gun setting adjustments you can reduce overspray save in materials and still produce a beautiful finish!
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Inokraft lvlp paint gun
amzn.to/48AZ4sP
finish 1 fc710 spot panel clear
with slow activator
amzn.to/3roFfog
bulldog plastic prep paste
amzn.to/3O6lIll
Bulldog adhesion promoter
amzn.to/3roEU4E
mirka grey scuff pad ultrafine (1500)
amzn.to/44ywUMQ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
• paint gun reviews
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@WJHandyDad Месяц назад

I like the idea of having a light on the paint sprayer... I never thought of doing that!

@user-zl8ic5gz4s 7 месяцев назад

Hello just wanted to say I’ve watched countless videos on painting and yours have been the most informative and easiest to follow,it’s the way u explain things in such a simple way that just clicks in my mind i appreciate every video u do thank u

@GarageNoise 7 месяцев назад

I really appreciate your comment. I've spent many hours training employees and developing a simple strategy to teaching these skills. Happy to hear it's appreciate by you and so many viewers. 👍

@fundamentallybroken4194 2 дня назад

So as a new painter, dropping air pressure and fluid volume and letting me go a bit slower has made a world of difference on the clear coat. I got 0 runs on my 3rd job. I was able to run it at my own pace, and it turned out looking great!

@GarageNoise 2 дня назад

Yes, and then when you get more experience and want to go faste you can turn up the volume.

@NeilD163 8 месяцев назад

Best painting tip to date.

@GarageNoise 8 месяцев назад

👊Thanks brother!

@JohnWD40TC02 8 месяцев назад

Hi Chris, once again some great tips and advice for laying the clear with less overspray I also paint fairly close and to get a nice closed thin coat I also lay my first coat with fast passes then keeping my gun at the same settings I will lay my second coat by moving slower, I normally set my gun to full fan, full fluid at 2 bar (29psi) which seems to work for me. Thanks again for sharing your expertise with us, love your channel👌🙏👍John UK.

@GarageNoise 8 месяцев назад

👍

@jimfeaster4837 8 месяцев назад

Nice tips

@GarageNoise 8 месяцев назад

👍

@bendafixer4542 8 месяцев назад

Finish looks great. Good info too.

@GarageNoise 8 месяцев назад

Thanks 👍

@setthehook4me 8 месяцев назад

Another great one, Chris. Thank you

@GarageNoise 8 месяцев назад

👍appreciate the support!

@robertcharlton1551 8 месяцев назад

Thanks for being very detailed!

@GarageNoise 8 месяцев назад

Glad it was helpful!

@MarcBchannel 8 месяцев назад

Ain't nothing wrong with that finish. Great tips. Ive been playing around with reduced settings to keep overspray down at home otherwise I get huge clouds rolling down the street😂 Can't spray at home like you would in a paint booth. Low and slow works better. These lvlp guns work great at home. My Iwata Lph400 has less overspray and finer atomization but its more expensive and uses more air. Great video. Cheers

@GarageNoise 8 месяцев назад

Love the lph400, the I've been playing around with reduced pressure onn the Sagola 3300 and its working well . Upcoming video on that.

@srodgie 4 месяца назад

Hi Chris, very interesting with regards to reduced pressure on the 3300gto. As you have the 4600 xtreme, have you tried playing around with reducing air pressure/fluid flow to obtain a good finish with less overspray? Cheers Steve 👍

@codicamg 8 месяцев назад

Love your channel

@GarageNoise 8 месяцев назад

Thank you!

@DD-mp9ok 8 месяцев назад

Excellent info, as always!

@GarageNoise 8 месяцев назад

👍👊

@johnwesleycollins878 8 месяцев назад

Thank you good commin information it helps

@GarageNoise 8 месяцев назад

Glad it was helpful!

@uniquerider694 8 месяцев назад

Good job... love from india❤❤

@GarageNoise 8 месяцев назад

Awesome, thank you!

@uniquerider694 8 месяцев назад

@@GarageNoise can. You upload. Custom paint job??? Like. Candy paint. Chemeleon . ( Unique colour)

@octanegarage3729 8 месяцев назад

Thanks for a nother great video

@timc3937 8 месяцев назад

I just use a large negative air machine on wheels vented to the outside.......just roll it over to side your working on and it might pull you in too :)

@GarageNoise 8 месяцев назад

🤣that works

@timc3937 8 месяцев назад

Had it kicking around for mold and asbestos remediation......first time I pulled the trigger on a spray gun in the garage I was like wait a minute I have a fix for this :)

@carlosoliva1376 8 месяцев назад

Good

@GarageNoise 8 месяцев назад

Thanks!

@prudhommejc 8 месяцев назад

Your presentation is really good and super concise, thanks for the videos!im looking to buy the aeropro, just worried about getting a dud, im guessing the chance is the same with any mass produced gun of any price level.

@GarageNoise 8 месяцев назад

I've had a few viewers say they got one with a machining issue on the cap. I've purchased many of these guns and haven't had an issue. When you get it I would spray something through it make sure the fans good if it is you shouldn't have any issues.

@binomair9326 8 месяцев назад

Hi man thanks for this channel it's great to learn from you, Why you don't make shelfs for paint and clearcoat to make space and trim...All the best

@GarageNoise 8 месяцев назад

That's definitely needed for sure. Alot of things get set aside while keeping the work moving.

@Juniors_bodyshop 7 месяцев назад

Any tips when you are setting gaps on fenders doors to get it perfect every time?

@GarageNoise 7 месяцев назад

Yes, set your gaps from the back of the car to the front. I will need to make a video to give you more details.

@Netnert 8 месяцев назад

I have the r500.. what's the best small air compressor you would recommend? I'm looking at the Fortress 27 gallon or the Kobalt 26 gallon.

@GarageNoise 8 месяцев назад

I don't have a brand recommendation but buy the most cfm production you can afford.

@JBIRD575 8 месяцев назад

What's the size of the tip 1.3 for clear?

@GarageNoise 8 месяцев назад

1.3 for base and clear

@JBIRD575 8 месяцев назад

@@GarageNoise thanks friend

@V1CSTAA 8 месяцев назад

Let’s make some noise !

@GarageNoise 8 месяцев назад

👊😜

@michaelfitzpatrick1241 8 месяцев назад

Of all the lvlp spray guns you've shown us is there one that is your favorite and would recommend for us?

@travisreed3433 8 месяцев назад

I noticed the nason xl products on the counter. Do you good luck out of color matches with it? I've used the nason color match was never good. Never used the XL I normally use ppg omni plus matches great but is expensive

@GarageNoise 8 месяцев назад

I like the nason xl but it has it's color issue as they all do. As gar as color match I don't notice much difference between brands. Nason covers well and has a decent finish. More expensive brands will lay down smoothe with better metallic orientation. Appreciate your comment and support!

@therealdeal4492 8 месяцев назад

You said 5cfm? Says 9 to 10 cfm on the data I read ?

@GarageNoise 8 месяцев назад

Yes, the inokraft spec sheet says that. What I've found is the spec sheets from the sellers of these guns are all over the place. So what I did was went to the manufacturers website. The manufacturer of all these guns is a company called Rongpeng that's where I got the low cfm info. How accurate that is, it's hard to say. I know that my Sagolas air consumption is 9.5-10 and this gun uses much less by comparison.

@therealdeal4492 8 месяцев назад

@@GarageNoise I have a sagola mini extreme air was around 7cfm Good to know these might be lower CFM ..I might try one ! Thanks for the info !!

@StormesRacing 8 месяцев назад

Where do you get the pour spout for the reducer?

@GarageNoise 7 месяцев назад

I think you mean for the prime. amzn.to/48n0ZBu

@StormesRacing 7 месяцев назад

@@GarageNoise no , lol it was in another video you had. It was a small screw on spout for the reducer or like metal gallon container.

@travisreed3433 8 месяцев назад

What size tip did you use? And do you use same size on clear every time? Ty

@GarageNoise 8 месяцев назад

I pretty much stick with 1.3 but have had good results with 1.4

@travisreed3433 8 месяцев назад

Thank you for your time and response. Love your videos. I've learned so much from you. I need to order shirt. I need to send you one of my shop shirts.

@JBIRD575 8 месяцев назад

How much is this paint gun cost??

@GarageNoise 8 месяцев назад

Price is about 100.00 link is in description

@JBIRD575 8 месяцев назад

@@GarageNoise not bad 109 with 3 tips

@joblo2299 8 месяцев назад

Y none of u utube painters dont tell the importants of viscocity??.thats the biggest cause of orange peel

@GarageNoise 8 месяцев назад

True, if your mixing ratio is correct the viscosity should be spot on

@MarcBchannel 8 месяцев назад

True. Sometimes I'll do 5-10 reducer to slick it out with good quality clear. Just not too much or you'll lose some shine. I've heated clear to make it thinner. Works good in cooler weather

@joblo2299 8 месяцев назад

@@MarcBchannel heated clear.good tip there...!!

@shottachase47 8 месяцев назад

@@MarcBchannelhow I heat clear up I also paint in a garage not boot and I’m new also

@MarcBchannel 8 месяцев назад

@shottachase47 I've heated mine on hot water. Heat material and activator separately. Or in front of a heater. Just not too hot. No more than 100F. Don't know Celsius