No video :(

Painting a Bedroom | Part 8 | How to Prime Walls for Painting

Подписаться 18 тыс.

Просмотров 13 тыс.

50% 1

Learn how to prime walls before painting. We've listed our favorite painting supplies below.
150 Grit 3M Sandpaper: amzn.to/2RGsPmr
Purdy 6-Inch Spackle Knife: amzn.to/3hMVYXw
Sheetrock 8-Inch Spackle Knife: amzn.to/3mzwOiQ
Dripless Caulk Gun: amzn.to/32Lja4w
Wall Socket Lights: amzn.to/3iMQZaG
Light Bulbs: amzn.to/3hSoBmw
Furniture Sliders: amzn.to/32KTvsD
Painters Plastic: amzn.to/2RJknCZ
4x12 Drop Cloth (I'd recommend getting 4 to 6 of them): amzn.to/32KTyEP
Reversible Screwdriver: amzn.to/2RHVuYc
Ridgid Shop Vac: amzn.to/2RGetm1
Ridgid Shop Vac Bags: amzn.to/32Lrwc5
Radius 360 Sanding Tool: amzn.to/2ZTOgoq
Wooster Extension Pole: amzn.to/2FOgj1F
Wood Filler: amzn.to/2H9aUCM
Werner 2 Foot Ladder: amzn.to/3hLzeHB
Louisville 4 Foot Ladder: amzn.to/3kzPfSy
Yellow Frogtape: amzn.to/3iMX8DI
Corona Cortez 2 1/2 Inch Brush: amzn.to/2FTfzIk
Corona Cortez 2 Inch Brush: amzn.to/2REVjgb
Handy Paint Pale: amzn.to/32LkLHy
Handy Paint Pale Inserts: amzn.to/3hL78fI
Purdy 3/8 Inch Roller Covers: amzn.to/32I8QKi
Wooster 9 Inch Roller Frame: amzn.to/3cdkm3z
Handy Paint Tray: amzn.to/2FNfuGe
Handy Paint Tray Liners: amzn.to/32JYJ7I
Contractor Trash Bags: amzn.to/2FSUa1U
Kitchen Trash Bags: amzn.to/2EgACEl
Blue Shop Towels: amzn.to/2RIXoI1
Red Powerhouse Caulk: Sherwin Williams
Duration Matte Paint: Sherwin Williams
Duration Semi-Gloss Paint: Sherwin Williams
Promar Ceiling Paint: Sherwin Williams
Drywall Primer: Sherwin Williams
Green Label Spackle: Sherwin Williams / Home Depot / Lowes
DISCLAIMER: The links above are affiliate links where we receive a small commission at no extra cost to you. This helps us support the channel so we can keep making content for you.
About This Video:
Jeremy Vassar of Practical Painting demonstrates how to prime walls for painting. You'll learn all about priming walls before painting and why we use Sherwin Williams drywall primer.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@prophecynewschannel7398 3 года назад

like this channel. hope you keep making videos

@SuperVassarBrothers 3 года назад

Thanks!

@DaveG-qd6ug 2 года назад

digging the light bulb

@SuperVassarBrothers 2 года назад

Thanks David. Our clients always comment on them too. Crowd favorite : )

@janetohlsen6712 Год назад

This is great! I love the music also.

@SuperVassarBrothers Год назад

Thanks for watching! I hope it was useful 🤙

@brendacruz721 2 года назад

😆 lol when you said keep it nice & wet 🤣 the red sticker 🤣 above said : that's what she said 🤣 hahahaha!!!!

@SuperVassarBrothers 2 года назад

Glad we could provide a laugh Brenda. :)

@meesha_p 26 дней назад

Can you do a short spot priming video?

@SuperVassarBrothers 25 дней назад

I will add it to the list!

@teodorgeorgievbg Год назад

You can pour into the primer some amount of the paint. That way during priming you will get some sort of a preliminar view on what the paint will look like on the wall :)

@SuperVassarBrothers Год назад

If you’re going to go that route then just get the primer tinted to the paint color at the store. We almost always do 2 coats so it’s not a big deal for us to use white primer.

@kostas_wellknown4519 2 года назад

How much time do you let the drywall primer to start the painting? You are the best guy in usa ! I love your job

@SuperVassarBrothers 2 года назад

Yes we think we are the best in the USA :). For recoat time its listed on the side of the can. Usually 4 hours. Sometimes we push it and will recoat after 2 hours.

@oaouda 7 месяцев назад

Thanks for the videos. They are very helpful and I am learning a lot about painting. For priming new drywall do you always use the drywall primer from Sherman Williams? I trying to decide between Drywall primer and multipurpose primer from Sherman Williams for 4000 SF of walls/ceilings. Again, Thank you and keep on the good work.

@SuperVassarBrothers 7 месяцев назад

There are a lot of primers that would work for new drywall. If you’re priming that much square footage then you may want to look into getting some PVA primer. Sherwin Williams has their version but you can get it at most places that sell paint. It’s sold in 5 gallon buckets and is super cheap. That’s what we use when we’re doing a lot of priming over new drywall.

@smarshnl Год назад

Great content, as always! You obviously chose not to texture-match the spackle work before priming... will a 3/8 or 1/2 nap leave enough of a texture for a seamless finish over the spackling after the final color coat?

@SuperVassarBrothers Год назад

In most cases we do two top coats. The repaired area gets rolled 3 times. One prime coat and two finish coats. That’s usually enough to re-texture the area effectively. “Seamless” is subjective. We get the results we’re looking for with our process. I suppose you could spend more time trying to re-texture but that’s up to you.

@untouchable360x 4 месяца назад

Do you remove any masking tape after priming or after top coat?

@SuperVassarBrothers 4 месяца назад

After all the top coats have been applied

@teodorgeorgievbg Год назад

Also, I do not know about you, but I am trying to avoid the brush as much as possible (practice shows that roller puts a better coat). Ever thought of using a special roller (that has an edger mounted on it) for cutting in?

@SuperVassarBrothers Год назад

It really depends on the product you’re laying down. Those roller edgers like the accubrush are hot garbage. There is a reason that professionals use a combination or brush and roller or spray.

@teodorgeorgievbg Год назад

@@SuperVassarBrothers And that tool works perfectly for corners. images.thdstatic.com/productImages/476192c4-3b31-4c56-9634-7249644fb58d/svn/pro-edge-paint-edgers-hd-pd-7002-c3_600.jpg

@ac7384 Год назад

You reccomend painting trim and walls before or after new flooring install ?

@SuperVassarBrothers Год назад

I prefer doing the painting after the flooring goes in. A lot of the time there’s new baseboard or shoe molding installed after the floor goes in which needs to be painted. I’ve also had a lot of experience doing it this way so I’m use to it.

@dreamie9868 Год назад

So do you have to use specifically drywall primer over spackle? And is that the same primer you used over the entire wall?

@SuperVassarBrothers Год назад

Most primers will work with drywall. Drywall primer tends to be the cheapest. If we’re priming whole walls we usually use something like a multi-purpose primer. Here’s a video that you may find helpful ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mEUZaXQpx2g.html

@ac7384 Год назад

Do you need to sand inbetween coats of paint on walls. Of so. What best to use. When doing manual by hand

@SuperVassarBrothers Год назад

It’s better to sand before doing top coats. We like using a sanding disk on an extension pole. If you’re doing it by hand I’d use 100 or 150 grit

@ac7384 Год назад

@@SuperVassarBrothers thank you. Is it a must. To Sand ? Also how get the dust off the walls ?

@tkalbertfamily Год назад

Is ProMar Primer comparable to SW Drywall Primer?

@SuperVassarBrothers Год назад

I haven't had much experience with the ProMar primer. We use the Drywall Primer often and it works great for priming drywall and spackle spots. I would assume that the ProMar primer would be similar. It's just a basic primer and would work well for all the things that the drywall primer would be good for. A lot of Sherwin Williams primers are similar.

@luzelenacazares1336 3 года назад

How to decide if you need a coat of prime or not?

@SuperVassarBrothers 3 года назад

New drywall and any spackled areas should be primed. We only prime the walls when there's a big color change. So if the walls are a dark color, and you're changing them to a much lighter color then it's usually a good idea to prime the walls with a white primer. This will cut down on the amount of top coats you will need to do. The reverse is also true. If you're going from a light color to a dark color then you may want to use a gray primer on the walls. This will also save you from having to do too many top coats with your finish paint.