Painting an Aluminum Boat with spray paint & primer | Smokercraft Restoration.

Подписаться 178 тыс.

Просмотров 437 тыс.

50% 1

Link to Boat Painting Products:
Paint Stripper Used: www.amazon.com...
Wire Wheel Used: www.amazon.com...
www.amazon.com...
Micro Fiber Cloths: www.amazon.com...
Sand Paper:
www.amazon.com...
Visit my ENTIRE STORE! www.amazon.com...
Help me become a full-time RU-vidr and get perks, rewards & exclusives in the process at www.patreon.com/TBNation
Check me out on SOCIAL MEDIA on these other platforms:
_______________________________________________
Check me out on Instagram:
@tinyboats731
@Toadville_Customs
________________________________________________
Find us on Facebook - Search:
-Tiny boat nation
-Tiny Boats
______________________________________________
Music:
From RU-vid Free Creator Library.
______________________________________________
Recommended Channels:
Fireant Fishing
JDS Outdoors
Decked Out Jon Boats
Captain Willy's fishing adventures
Jar-Mouth ADDicT
/ @crushedemtb
________________________________________________
Disclaimer: I am not a professional fabricator or builder.
I put out concepts for people to view.
Modify your boat at your own risk.

Опубликовано:

23 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 249

@seanyc1973 6 месяцев назад

Only tip to add from 20 plus years of painting autobody and heavy equipment don't spray in the sun you will see way better results. Awesome diy video! good job!!!! nice to see people getting after it and not talking about it !

@basslife9078 3 года назад

UPDATE: Michael, first I want to say thank you for you videos. I am about to start stripping paint on my late grandfather's 1968 Lonestar 16' semi-v bottom. I will start tomorrow. Im using Aircraft Remover paint stripper. My uncle painted it with latex paint with no primer. Its peeling and should remove very easily. UPDATE: I purchased a 3200psi pressure washer and it peels the paint right off. Some areas need more help with Aircraft Remover in some areas and a wire wheel in more stubborn areas but the paint as of today has been completely stripped. Tomorrow I'll polish the aluminum and get it ready for primer and paint after a wipe down with denatured alcohol. Thanks for the videos. They've helped all through the process.

@fryreartechnology7611 4 года назад

So after a year of this paint job and no clear coat how is it holding up? I’m restore a old boat myself.

@benitomartinez1081 4 года назад

Bought a ‘89 12ft Sears Gamefisher aluminum boat a couple weeks ago and saw this video. Did exactly what you did and it came out great! Now just need some decals and upgrade the Gamefisher 5hp engine to something a little bigger. Great video!

@kylemartinez7160 4 года назад

Great Job! One tip for you is to use Kleen strip. I have used it on several jobs and you would be able to wipe the paint off instead of all that wire brushing.

@lizzard7473 4 года назад

Hi. Nice to find your channel. I have a 1989 blue fin sportsman 1700 that I have repowered with a 1987 Yamaha 70. I am in the process of redoing the floor, wiring, and carpet. I was able to get some aluminum enough to do the entire floor and support the runners too. I love that this video shows just how easy it would be for me to paint the interior of the hull sides instead of applying carpet. Thanks for the video.

@codylockmancl 4 года назад

I just got a boat like this thanks for the step by step looking forward to restoring mine

@johnphinney292 2 года назад

JB WELD I use it to fill dents and holes in aluminum boat projects. Work line any other filler. Helps to bare sand with 80 grit then apply jb weld . I buy the biggest tubes I can find for larger areas and mix in bulk where possible. Leave is a little raised. Sand down to a finish, reapply as needed.

@dubbys 5 лет назад

Love the videos. Just fyi: if you wet the concrete around where you're painting it will help cleanup and finish product. Good job. I'm motivated.

@keithdavis348 4 года назад

Great video. Your store is awesome! Everything needed for boat rebuild. You got me looking for a project now! Thanks

@Islandbiker10 5 лет назад

Might i suggest a polycarbonate stripping wheel. Not only will it SUPER easily strip but surface preps the metal for paint. Im a metal fab guy and thats all i use. Will remove all rust way better than wire wheels. Cheers!

@WheresTheSauce 5 лет назад

100% can confirm. i used the same process. Only thing i did different was self etch primer -> regular primer -> paint. 200ish miles of gravel roads and she's VERY TOUGH, aside from a few very small dings still looks flawless. But dings and scrapes are a sign of adventure anyway. a perfect flawless pristeen boat never leaves the trailer or sees water and doesn't catch any fish.

@clintf4002 2 года назад

they sell rubber decal removers (Works on drill) at most auto body supply stores. way easier than scraping

@stevehitchcock7617 Год назад

I just got a 12ft v shape looking to turn into bass boat. Love how helpful your website it.

@novicefisher1718 4 года назад

Michael your videos have been very helpful. I started to stripe my 14 ft starcraft jon boat and should be painting this weekend. Keep putting out these videos.

@nosydmedia9591 2 года назад

I just bought a 1968 14ft StarCraft seascape. Can't wait to restore it

@shawnp8429 5 лет назад

I sanded down my entire Jon boat White did down with rubbing alcohol and then primed it and then thinned out rust oleum oil base 6 years ago painted it with a roller still looks new. Then all my other Jon boat same prep except are you seahawk Jon boat paint also looks new still.

@olivierbeaulieu6316 3 года назад

starting restoring a old boat to go to hard to get place so i don't damage a good boat great videos very helpful

@guyh.4553 5 лет назад

I saw on another video that someone used aerosol aircraft paint stripper as that stuff is hard as nails. I'm going to repaint my painting of an old paint job on my Starcraft. Then I'm going to be using heavy equipment/ tractor paint for it. The rattle can already has a hardener in it where the bulk paint you control the amount you add. Rustoleum has an above waterline paint that is great as well

@taylorkolling3632 4 года назад

Just got done painting my boat, went to apply a gloss clear coat (thought for more protection?) and it did not seem to stick at all and bubbles all over. Had good conditions and paint was fully dry, luckily I only did a small part of the boat before I realized what was happening. You did not mention a clear coat assuming you did not use one? After sanding and repainting the area it looks great again, wondering is a clear coat is necessary. Thanks

@rayanslim 2 года назад

Sounds like crazing from the first layer continuing to off-gas. either 1 hour between coats, or several days. The colour had to cure completely before the clear-coat. not just dry.

@boobylinks 5 лет назад

Awesome job. My wife boasted she's gonna tackle a fresh paint job on my 17' Lund. I'll just show her this video and she'll think twice, hahaaa.

@kylepeterson4316 4 года назад

What kind of longevity did you see from this paint job? I just used this video to paint my boat and I was wondering how long it should last like this. Thanks!

@Vanzgardian1 2 года назад

I really like the look of that black paint!

@dimwitrj 5 лет назад

Be honest, how bad was the over spray on the Nissan?

@kevinwaller620 5 лет назад

I'd say plenty.

@centralcoastcamper9631 5 лет назад

Always use stainless steel wire brush bits on aluminum. Some wire brushes are carbon steel and will leave rust swirls on aluminum. You do nice work Mike. I like visiting Lake Havasu. Many fond memories there. Too hot for me to live there year round though.

@harleyfolgado Год назад

Wire brush is only good to initially strip the paint. You must go over it with 240grit to give it the appropriate scratches to bond. Scratches from wire wheel is too smooth for proper adhesion. It seems like wire wheel is all you need to do but the bond isn't as good.

@zachhoyt92 3 года назад

I watched few of your vids, good information. They make soft wire wheel cups for grinder in 4in 5in ect would speed up your strip process. Did my entire v18 in about 45mins

@michaelbenna1089 2 года назад

Was it hard to keep from digging in with wire?

@zachhoyt92 2 года назад

@@michaelbenna1089 not at all just dont do twisted wheels. The cups or straight bristles is about the best. All 19ft no problems

@mrdilligaf1968 2 года назад

Great job ! Been thinking of painting mine and adding some graphics too. Cheers and thanks

@3Beehivesto300 10 месяцев назад

I have a 50 year old aluminum boat. Trying to redo the bottom paint but there’s some heavy pitting that I found after sandblasting the bottom. Would you recommend that I fill the pitting with epoxy before putting on the new bottom paint?

@briannaneal6749 Год назад

I noticed that you mentioned you used 6 cans total. Is this 3 primer and 3 regular paint? Or less primer more paint?

@photofather1 4 года назад

All i did was power-washed the boat anything that wouldn't come off with a 4gpm Power-washer i Just did a quick wet sand I spot primed the bare spots then used a $19 Harbor freight sprayer and that was 4 years ago and its holding up.... I only commented for people who dont have the time or want to strip whole boat.. the key is to get the old paint that is not coming off a Grit for new paint to stick... This is how they paint cars as well. they dont strip them down.... I mean thats the best way dont get me wrong...... but the washer striped everything inside boat so I was able to seal and weld (using aluminum brazing sticks ) for loose rivets or to just reinforce.. all my tiny boats before i used clear roofing silicone on all seams before i decked and it worked great as well. Happy fishing

@TrustGod-l6j 5 лет назад

Looks great ML. I'm a muralist...those index & thumbs tips (I'm sure you used both left & right) get sore after a couple cans, lol. Tip: A cheap painting tarp under your projects. In your case, it saves the driveway from silhouette. Gd wrk!

@jasonsmith3726 2 года назад

There is a product called devcon aluminum putty which is the best way to patch holes and dents in aluminum if you do not have access to a mig welder with a spool gun. I have done repairs with fiberglass putty but you have to be very tedious with the prep and understand how fiberglass works in order for it to hold up

@hitides78 5 лет назад

Noticed you left the engine in place? did you just go around it. Did you paint the engine? or Tape any areas to make sure paint didn't get somewhere it shouldn't? Thanks for the reply

@tomh225 8 месяцев назад

Bit late but I recommend epoxy primer since it is much more scratch resistant and strong as hell.

@joshuacrawford9146 5 лет назад

How many cans of primer and black spray paint did you use? I’m about to paint my boat in 2 weeks!

@jimmieepperson7255 3 года назад

I just wondered why you didn’t get it rhino sprayed where the bottom, silver is located. That way the rhino will let the boat run right over things, and won’t bother it.

@hitides78 5 лет назад

I noticed you left the engine in place did you tape it to protect a certain area ? Did you paint the engine or just go around it? Also what about the bow? Thank for a reply

@rockstarfan886 5 лет назад

I have a lot of experience with that citrustrip it works better if you scrape it off after 30 min or so. If you let it completely dry it doesn't really strip crap off. Last time i went with aircraft aluminum part stripper from Walmart

@rockstarfan886 5 лет назад

@@TinyBoatNation im with you there thats the same reason why i bought it it does work good but for me required 2 almost 3 bottles to get the job done. Boat looks great regardless.

@steveleohr175 3 года назад

Question i have a aluminum boat an im wanting to paint it what kind of surface prep is required if any ?

@AmRussHunterTV 3 года назад

found Krylon for you. looks like it is only available at Sherwin-Williams. thank you for all the info you share!!! doing my second boat.

@jorgejaimes4115 2 года назад

Hello, I have a brand new unused aluminum trailer that I want to last me a long time. Should I sand and paint it right now ? Or leave it alone and later a year or two sand it and paint it ?

@marcv8813 5 лет назад

That repair appears to have been done by JB Weld Marine Weld Epoxy. Sorry, probably answered many times already but I don't have time to read. Nice job.

@나-w3e1m Год назад

멋지네요 Very nice video

@joshualee9918 4 года назад

Would Rustoleum Acrylic Enamel work the same? And if painting over the existing paint would I still need to use a primer?

@mcclaren807 4 года назад

Good video. I'm looking to paint the top 1/2 of my boat to get rid of the all the stone chips I seem to have collected from trailering.

@djrand62 5 лет назад

That patch looks like JB Weld.

@bacleted 3 года назад

Bro I think the boat looks great and great job!! Thank you for sharing. This heavy duty wire brushes you used first are for taking thick rust and paint off a tractor oops! It looks awesome put stickers over that spot👍🏻

@mini696 5 лет назад

How many cans?

@changievangie 4 года назад

Did u send/scuff the self-etch primer before your top coat? I searched online and they said self-etch primer needs to be sand for top coat to hold...

@Manwhosays 5 лет назад

Yo michael I know this video is old but I wanted to know if you painted the rear of the boat? Is it difficult or should I even paint the rear?

@Adrien-gm4dr Год назад

Hello, should I use a wire brush first even if my aluminum boat doesn’t have paint? Or should i just start with sanding?

@TinyBoatNation Год назад

Just use 220 grit to prep the surface

@frankventurella2972 5 лет назад

I used a structural epoxy putty made by Marine-tex to fill in some large defects like this. It goes on and cures like black glass but turns gray after it's sanded.

@isaactungate6669 2 года назад

I’ve seen 2/3 videos of yours on painting aluminum boat. Which one should I follow. Willing to spend 2 or 300 bucks to paint outside and the deck.

@TinyBoatNation 2 года назад

Rolling and tipping

@alphacapo 5 лет назад

Jb weld is awesome shit on aluminum boats. Unless its major transom repair. Or major structure damage. you can use JB WELD with no worries.

@centralcoastcamper9631 5 лет назад

On your drill powered wire brushes they must be stainless steel or brass when used on aluminum.

@jtbassgambler2594 5 лет назад

Use the fine brush

@KamalaKackles 4 года назад

What is the most durable way to paint the bottom of an aluminum jonboat that’s been stripped down to the bare aluminum???

@mikejoned7148 5 лет назад

Air craft paint remover not sure if it's still around put you spray that and the paint bubbles right off.

@boboscar99 2 месяца назад

clear it, good job man

@bradynlhotak7019 5 лет назад

Hey, do u think you could paint over the paint already on the aluminum boat or would you have to strip the paint?

@brodejarvis6961 5 лет назад

Bradyn Lhotak I paint over the paint on my 0ld 16 footer and I lasted for at least 10 years with no issue I sold it so I don’t know how much longer it lasted after that

@mannyd39 5 лет назад

You can paint over it just sand it a bit and clean it with degreaser for the dust and you're good to go

@MisoJuice 2 года назад

Ever try the rustoleum oil based roll on or brush on paint? Wonder if that would work too

@TinyBoatNation 2 года назад

Rustolium topside is supposed to work well.

@arollinseng 4 года назад

love the videos about to buy by first boat so gearing up

@nissan300ztt 2 года назад

Im in the process of restoring a 1956 "home made" boat. Thinking its a sea nymph. And I will be cleaning and painting soon.

@jamesdelaneypredatoranglin8393 3 года назад

@TinyBoatnation I have fitted a piece of checkered aluminum to the front deck of my boat 1650 mm with the bow Shape cut out to fit .. My Question is would this type of way that you have painted the outside of the boat be durable enough to walk on as it will be a casting deck

@jamesmitchell780 5 лет назад

Nice video, starting on my smokercraft the same way

@laurastclair357 4 года назад

I need advice desperately I bought a Jon boat 12ft aluminum I sanded the whole thing then I sealed all the way around the boats rivets I sanded a little more than I applied six coat of can spray of 3m black under coating. I took it in the water yesterday it felt slow and drudging maybe heavier. I dont know what happen my boat has a six hundred pound wheight limit. It was so disappointing. I felt it did much better before I did any of this. Can you tell me some advice of where did I go wrong?

@torahexplorer Год назад

Thanks for the video. I’m going to do this.

@jerrynewberry2823 5 лет назад

You have to use zinc chromatic to cover aluminum or zinc coated material, it stops the oxidation. That is the light coating of material that prevents further oxidation. What you will have to do is repaint in 5 years. Also when using paint remover, don't use the "green stuff". Use the stuff that "you get cancer from it for 2 generations " Works faster and better.

@jeffreyreid8428 5 лет назад

Mike great video. I prepped my boat the same way with the exception of the paint. I just used three coats of oil based paint. I am sure it won't hold up as well as a two part Automotive paint but it was a easy to apply and should be easy to maintain I hope only time will tell. Over all I am happy with how it turned out. Everyone has their opinion on how things should be done But as we learn from one another our overall product gets better and I thank you and all the other TBN builders for their skills and knowledge.

@kevinwaller620 5 лет назад

If you put an oil based house paint on an aluminium boat, the coating will crack and begin to break down quickly, and the only remedy for it is to remove it completely. Oil based coatings are not flexible enough to flex and stay adhered to aluminium. A two part epoxy will always outlast a single component coating, but, that said, a definite no no us oil based coatings.

@OG-Paul-Valentine 5 лет назад

I would bet money that the repair you uncovered is JB weld.

@OG-Paul-Valentine 5 лет назад

@@TinyBoatNation If you mix it and then apply it to the hull with a putty knife it really makes a difference. Either way it is some sort of metal epoxy for sure.

@Hunter__14 5 лет назад

The bottom of the boat that did not get painted, did u sand it as well, and if so no rust issues

@jtbassgambler2594 5 лет назад

I paint mine with air pressure and it came out to looks sick like new boat out of dealers

@GettingBentWithBo 5 лет назад

What do you suggest for doing the same but for a saltwater application

@GettingBentWithBo 5 лет назад

@@TinyBoatNation Do you have any experience with or suggestions?

@jjmcg9688 4 года назад

I tried this and did terrible. Love the tbNation, but I can’t use a rattle can. How would you fix? (In Minnesota, Lots of algae)

@Reeser00 5 лет назад

Aircraft stripper takes everything off. Scrapes off like slime. Minimal sanding. Especially if you want to clear coat metal.

@FkN_Humble 5 лет назад

Do you have any advice for a first time.boat owner/buyer. I just got a mid 70s blue star 13.5 foot closed bow. It's kinda rough but no leaks It was on the water last year. I'm completely new to boating and would love some advice on what my first initial steps should be

@richlien5598 4 года назад

Nice work. Like the decals. Do you need to apply clear coat or anything else to make sure it stays on.

@noahdavis3 10 месяцев назад

Hey Michel, I was wondering how many can of spray paint this took

@TinyBoatNation 10 месяцев назад

@southwests5508 5 лет назад

I believe that is Devcon aluminum puddy used to repair aluminum. I have a question for you. what would you consider to be the best boat for making a "tiny boat"? v haul? flat bottom? what size?

@chrislowkeylisby5138 5 лет назад

I cant fine the krylon automotive anywhere is there something comparable to use? I was trying not to spend the money on the zinc you spoke of...

@jeremydufour4138 5 лет назад

Hey Michael, thanks for your inspiration on your builds. Two questions, Do you have TBNation or Depth Squad decals for sale? And have you ever used truck bed liner spray on the bottom of any of your builds? I have a boat I’m working on (it’s much like Matt’s boat) and it’ll be in creeks, rivers, and lakes. I’d like to have extra rock protection on the hull.

@Drelick1 5 лет назад

Hey off subject question. What would you think about using a a truck diamond plated tool box to replace the bench seat in the boat? I seen it on tiny boat forum.

@Drelick1 5 лет назад

@@TinyBoatNation thanks just a thought but i'll differ to the Tiny Boat 👑!

@aKDre 5 лет назад

I have a small 10 foot aluminum jon boat..its already bare aluminum so would i be able to just go ahead and use primer and paint then?

@aKDre 5 лет назад

@@TinyBoatNation thank you

@aawindowwashingllc4503 3 года назад

How many cans of self etch and how many cans of paint? I stripped paint and am ready for prime😁

@aawindowwashingllc4503 3 года назад

Did u have to put anything on the bottom of the boat or can I leave it just bare aluminum?

@markjob7736 3 года назад

If the paint is so hard to strip off, why not sand it smooth and use etching primer and then paint it? I just bought a 1963 16 foot Starcraft and I'm not stripping it.

@markjob7736 3 года назад

@@TinyBoatNation Thanks for the reply.

@tonyapilcher 4 года назад

Hey, I am doing something very similar but with a 14ft v bottom I was wondering how many cans it took between primer and paint for the sides

@MoyesAdventures 4 года назад

Would like to know the same thing

@apocoperative7443 4 года назад

Did my 16 ft sylvan and it took 5 cans of primer and about 9 cans of paint

@hartleyhomesteadmichigan6041 5 лет назад

Do you think I could just use a sheet sander and not wire brushes?

@Pmit123_ 3 года назад

How many cans did it take brother? Looks good

@tripster003 2 года назад

How many can of primer and paint did it take? Your inspiration will help me on painting my 16ft StarCraft SS

@TinyBoatNation 2 года назад

@darrylb4048 3 года назад

JB Weld? That looks like it and it comes in marine grade.

@nickward7079 5 лет назад

Looks great! I did mine pretty much the same way

@roryhayes278 4 года назад

How is it looking now?

@hitides78 5 лет назад

Another Great video! How many cans do you think I would need for a 1542? Could you use a paint brush or roller to apply the paint, if so which brands would you recommend. Thanks again

@hitides78 5 лет назад

@@TinyBoatNation I was thinking entire boat ....but now I'm having second thoughts and just go w/ the side for now...

@EpIc_NaChO 5 лет назад

That repair must be Splash Zone A-788. Or something similar to it.

@tommiebartley3081 3 года назад

jb weld putty would be my guess

@69Celito 3 года назад

Great video and work. You are the man! :-)

@takayama1638 5 лет назад

Looking good.

@MrSilverRios 5 лет назад

Can you provide a link to where you got your custom logos? I have a similar boat which I plan to paint the same color as yours. Trying to find logos for it before painting. Any help welcomed. Thanks

@MrSilverRios 5 лет назад

Thanks