PALLETWOOD TIPS AND TRICKS and a FLOATING shelf

Подписаться 155 тыс.

Просмотров 59 тыс.

50% 1

How to make a floating shelf from palletwood. Tips and trips for palletwood furniture as well.
Thumbnail cover models
Hew and Awe / hewandawe
Fixit Fingers / fixitfingers
Woodwork and Whiskers / @woodworkwhiskersash9731
Sumos Projects / @sumosprojects
Karl Pope Woodcraft / karlpopewoodcraft
Memberships 🙏 Thank you Kindly for supporting my channel
CHECK SQUARE SQUARED
Brian - Outdoors with BT
/ @briansbuildsandoutdoo...
Francisco Martinez
CHECK SQUARE
James - @fixitfingers
/ fixitfingers
Mario - @thewoodfather l
/ mariocappellanothewood...
Karl Pope - KARL POPE WOODCRAFT
/ karlpopewoodcraft
Paul Williams
Alberto Bressen
SAFESTYLE EYEWEAR (Affiliate) DAINER10 at checkout 10% off
safestyle.com....
STARBOND - Get the freshest CA glues in the market with www.starbond.c...
GET 15% off with code DAINER15
or
STARBOND on Amazon (USA) -
Starbond EM-2000 Thick CA - amzn.to/3qQIuz1
Starbond KBL-500 Black Medium Thick CA - amzn.to/3pmRI5N
Starbond BR-150 Brown Medium CA - amzn.to/2NsoTGW
Starbond EM-02 Super Fast Thin CA - amzn.to/2M1M0Yw
Starbond EM-150 Medium CA - amzn.to/3a5bVGY
Starbond Instant Set Accelerator (Activator) - amzn.to/2MogGTI
Check my stuff out:-
Instagram - / dainerdesign
Power Tools
DEWALT 1800W 330MM THICKNESSER DW735XE - USA amzn.to/2XfAFqD
Dewalt Router Trimmer - Australia amzn.to/3gxwtud USA amzn.to/2XdFUqY
Dewalt Orbital sander - USA amzn.to/2ZRYEhA
Dewalt Drill driver and Impact driver -USA amzn.to/2TMWmML
Bosch Sliding Glide Miter Saw - USA amzn.to/2XijDsa
Other Tools and useful stuff
Pneumatic Denailer - Australia amzn.to/36LOQGs USA amzn.to/3cirEBm
(the one I need)
Metal Detector - Australia amzn.to/395DzSc USA amzn.to/3gAV0hI
Clamps Irwin Quick Grip - Australia amzn.to/2FIOCDV USA amzn.to/2TPxi7W
Pipe Clamps Australia amzn.to/35R6oPT USA amzn.to/2MegEdW
Wood Work Pencils Irwin - Australia amzn.to/2tdEOz5 USA amzn.to/36J9h7v
10 inch dewalt blade - Australia amzn.to/38WcYXR
Irwin clamps - Australia amzn.to/394YzJb
Stanley 12 inch Square - Australia amzn.to/2Aj1zoK USA amzn.to/2XHaDM5
Toggle Clamps -Australia - amzn.to/2Xe4CpR USA - amzn.to/3gF4nNq (same size, different brand)
Bow Products Push Pro - (push stick) Australia amzn.to/2ZUObSi USA amzn.to/3duCJAE
Bow Products Guide Pro - Feather board - Australia - amzn.to/3dhdphy
Products I use:-
Titebond III Ultimate Wood Glue - 3.785ltr - Australia amzn.to/37Spnuv USA amzn.to/36Se6M4

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@Nedswoodworks 2 года назад

Another winner, and no Gonads were harmed or hurt in this build!!! 😂😂😂

@ScottTurnerformeindustrious 2 года назад

Mate I good a good laugh, oh and good job! Hope the Gonads weren't harmed in the making of this video. Keepemcomingdude.

2 года назад

dude you are the king of this business. Yes you are a pallet king. I appreciate your good and true ideas. (I love your miter saw. Because I'm there :-) )

2 года назад

@@dainermade That Rooster is yours now. :-) The rooster has come a long way. And the cock is very tired :-) Cheers mate. All the best. Kind regards

@kiplininman7383 Год назад

Great job! Would love to see you make a gaming table for Dungeons and Dragons game play. Love the videos.

@JesperMakes 2 года назад

Love that Turgworks t-shirt. AND of course all the pallet stuff....

@JesperMakes 2 года назад

@@dainermade I'll stay tuned ...

@leighgray8537 9 месяцев назад

Bloody beautiful as always mate great job.

@dainermade 9 месяцев назад

Thank you kindly

@tommywendt6118 Год назад

I’m new to the channel and beardless you is not what I was expecting 🖖

@SujMenon 2 года назад

Thats some strong shelf there, Mark. Especially with Dirk and all sitting on it on the thumbnail 😜😁

@michaelwillson6847 2 года назад

Anything that keeps your knackers/gonads in tact is a big plus in my book. Shelf looks awesome 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@ykkfamily Год назад

I chuckled when it fell apart 😁 great video and an idea ❤️

@piratetaylor29 2 года назад

Never to many clamps! 👍🏻👍🏻🇺🇸

@CrapE_DM 2 года назад

So glad to finally see someone use a french cleat for a floating shelf. Not used enough, IMO.

@woodfather 2 года назад

I don't think I've ever seen that trick to cut angles and have the offcut drop off, cheers! I hate making those cuts, will remember that one for next time. 👍👍

@woodfather 2 года назад

@@dainermadegood job izzy swan 😉

@woodfather 2 года назад

@@dainermade 😄 "Look at this jerk, he uses MDF as a drop shelf on an angled cut - doesn't he know that in paraguay you can't buy 3mm mdf ? how am i supposed to use that technique as well, think of you folowers instead of big MDF corporations!"

@W4TRI 2 года назад

Gdday Mark! I'm pissed drunk watching yer video! Check square!

@slowburnwoodworks7626 Год назад

This is a great idea 👌 Thank you for sharing!

@Skullbaggertv 2 года назад

This is the kind of videos i like ! Dont care too much for wood turning . Nice job!

@julietphillips1991 2 года назад

Just want to say that I didn't jump on and jump off...always like what you do!

@ArchEdge 2 года назад

3mm MDF trick is a game changer! Love the authenticity of the videos Mark. They feel natural and un-scripted. Recently suscribed, and looking forward to seeing more videos from a fellow Aussie!

@mickecast 2 года назад

You Got my subscription because of one piece toys :), and got my views in a lot of your videos because of excelent ideas with pallets.

@tonypridham1253 2 года назад

Recent subscriber and love what you do. You have a very natural and funny way of working, great to watch. I now find myself looking at pallets in a whole different light, my wife is going to hate me!

@jwd888 2 года назад

just made me 1st table thanks to people like yourself .. cheers for all you do m8ty....it was after fiinding your channel that give me the final push (i didn;t know i needed) to get going.... i owe you a 🍺 or 🍻 i feel 👍

@BuiltByChris 2 года назад

As usual, love your work. I only wish I could different colour pallet wood as well. Mostly just pine.

@stevehedges1158 2 года назад

Great video again I haven't seen that tip of keeping the gonads safe I will be using that in the future thanks Mark my gonads thank you as well 😀Steve Tas.

@BBGuitars 2 года назад

Right, Im off to find some pallets! Few things to knock up for the house and the results youre getting are great! Did some time up in Townsville, yeah stinking AJ, was definitely love/hate relationship with that place!

@BBGuitars 2 года назад

@@dainermade were you in at some stage? The beard says not any more haha

@BBGuitars 2 года назад

@@dainermade was a Combat Engineer up at 3 from 2010 to end 2015, then moved down to 6ESR in Sydney for 2016 and then they moved the unit to Amberley RAAF base in 2017. Ruined myback and ruptured a disc in my neck on JLC in 2015 so was all downhill med D from there. The new woodwork shop they built up at Amberley though, WOW. They spent some serious coin in there, wish I had access to that now. Back in Vic these days, started making guitars but looking for other avenues to sell some odds and ends to cover the cost of my tools...

@samsboringchannel 2 года назад

Mate. That 3mm mdf trick is top marks. I had a proper brown trousers moment first time I had kickback on a mitre, and it missed my plums by barely 10mm! I reckon you'd get a lot of traction if you snip that particular tip into a short mate, it has all the right attributes!

@samsboringchannel 2 года назад

@@dainermade haha, fair enough, I need to have a proper Crack at insta, and yt saying that haha.

@BionicBeatBoy 2 года назад

If you havnt done so already, do you reckon you could do a clip on pallet selection out in the wild. What is the ducks nuts, what do you pick up under the heading of "meh this is ok" and what do you drive past.

@stephanecome4234 2 года назад

Clamp master!!

@dgb5820 2 года назад

That 3 mm tip is awesomeness

@JohntheSchreiner 2 года назад

Looks good!

@craftingwiththebeard4728 2 года назад

That’s an awesome looking shelf!!!

@markarmstrong2592 2 года назад

A tidy little shelf good job Mark

@garydeandeery Год назад

You keep giving me ideas before Iv finished the other one lol. Still love your work I’m just trying a carbon fibre table and scaffolding board then chase out for some resin like a river table but in carbon

@TowTruckMark 2 года назад

I would have liked to seen how the hook attaches to the wall and a better look at how the wall piece latches to the Shelf

@TowTruckMark 2 года назад

@@dainermade THANK you for the response and your time... GOD BLESS YOU MY FRIEND... LOVE YOUR VIDEOS 📹❤

@RobertBrown-Workshop44 Год назад

Just found you, Loving your channel;good bastards indeed!!!!!

@russellmartyn6597 2 года назад

Recently subscribed and watch many of your wonderful videos. Your are very talented, inspiring and give the relaxed presentation that makes me think I should give pallets a try too! Thanks for all your tips and work putting all this together.

@steven_vogt 2 года назад

I'm so glad I found your channel 👋

@Thesidingsworkshop 2 года назад

Cool video mate

@woodworksbygrampies1284 2 года назад

Hola! 🖐That is a fine looking shelf. Believe it or not I was lost until it all came together. Too bad you had a "spill" there before you clamped the moisture out of that wood 😂😂Then it became clear, it's a really nice project. Take care and have a good one, Adios! 👊

@briansbuildsandoutdoors4936 2 года назад

Nice job Mark. There seems to be no end of things that can made from pallets. All those snub nosed know it alls can go take a running jump. Anyway what was I saying, oh yeah, good job and keep up the good work! BT out.

@williamlott7612 2 года назад

Great job Mark. Check square. Darlington, South Carolina USA

@lighttheoryllc4337 2 года назад

The Material of Choice in Pallet Town Pokémon

@jacksonthatbassist Год назад

Hey mate, just found your videos and I love them! You’re inspiring me to start woodworking! p.s. love the one piece figurines!

@HewAndAwe 2 года назад

I guess I deserve that 😂😂😂 Hope you're well dude, hope you had a lovely weekend! Keep killing it! ✌

@jaredrobertson1955 2 года назад

That’s one great looking shelf

@SuperCacahuete93 Год назад

Joli !

@TerraformTogether Год назад

Love it :)

@jackthomson73 10 месяцев назад

Hey mate. Nice job on the shelf. Have you noticed a lot of your comments have vanished from threads lately. Someone will comment and then you post a reply they comment on your reply but but you can only see their comments. 🤷‍♂️

@dainermade 10 месяцев назад

Hey Jack, I’ve not noticed anything sorry. I generally do not go back to the original comments unless there is further conversation

@prakashsamputh1031 2 года назад

Always such an inspiration for me. Thank you for all your tutorials ✌️🙏

@prakashsamputh1031 2 года назад

@@dainermade yes yes I’ve seen them all 😃👌👌👌

@stirlingwoodcraft 2 года назад

Nice one mate, those pallets came up great, you have certainly have a lot better pallet wood up there in Townsville then the shit I have over here in WA 😂

@peterb327 2 года назад

Great piece mate!

@riversidewoodworks 2 года назад

Awesome video mate! Love what you do with pallet wood!!!

@russellhayward2359 2 года назад

You can add a bit of table salt when you are glueing up, it does help stopping things from sliding around. Tho I've not personally tried it with 45° cuts 🙂 great video. Thanks for your hard work 😁

@loopinnerthe Год назад

This was a glue only build. It's rare to see that. Plus there was no palm router to shamfer the edges. Shunning tape for elastic bands was also mold breaking. There are makers yelling at their televisions demanding at least a complex leaky epoxy pour to right your wrongs. You are so easy with the strict rigours of the woodworker genre and a breath of fresh air. Could you imagine If you and Jesper were in the same room together, I suspect the combined awesomeness would melt the planet.

@loopinnerthe Год назад

@@dainermade this video I reckon was within a spider's nadger of being the best video on RU-vid but that honour has to go to your Z leg desk... but then there is Jespers stool made from snail infested junk wood. The one where he melts the bees wax on a fire... gosh... so much joy you guys bring to the world...

@funkyflips5388 2 года назад

New subscriber 🇦🇺 About to check out your other videos.

@funkyflips5388 2 года назад

@@dainermade 😂😂

@shamicentertainment1262 Год назад

so you dont worry to much about the wood being crooked when glueing? i just glued 5 pieces of pallet wood to make a table leg but ive only got 3 clamps and the gaps in the table leg is enough where Im not sure i want to use it. I might order your clamps from ebay ive been spending $37 on irwin clamps from bunnings.

@woodworkwhiskersash9731 2 года назад

Glad to know I am a good bastard. Question, I could go back and watch it again, but I am busy not dying so I will just ask the question. Could the waterfall not have been done in one length?

@KuyaMarlonVlog.02 2 года назад

WOW nice video kabayan hello FROM Philippines WALK TOUR channel 👣🚶🏃🏃📽️📸m

@Joopydoopy111 2 года назад

Hey, can you get your son to check his school emails? he has unfinished assignments he needs to complete.

@jarrodboon7421 2 года назад

Mate, that's the biggest squeeze bottle of sauce I've ever seen. You must get through a heap of pies 🥧. Oh yeah, and grouse shelf.

@northernninjarunner5506 Год назад

Kickback into the gonads 😮

@stufromoz8164 2 года назад

LOL still have the old 2 buck spatula.......

@scottmaclean1455 2 года назад

how many claps do you own? by my count some where near 50 do you really need that many ? im just start in on same path and all i have is around 6 and longest is only 500mm

@AJxxxxxxxx Год назад

I burn all the left over “bad” woods

@gageholley3016 8 месяцев назад

would it be safe to build a cutting board from pallet wood

@dainermade 7 месяцев назад

I don’t because I can’t be 100% sure on a direct contact food surface

@FixitFingers 2 года назад

First Again! :P hahahahahaha

@woodbywhitey2212 2 года назад

That's what she said.....

@FixitFingers 2 года назад

Well that shirt just keeps going and going... we'll have to get you a pink one next :P Good to see the old pallety goodness back! I was so excited to click on the thumbnail I didn't notice this is the one you wanted the pose on and had to go back and check after watching 🤣

@chrisbolt5350 Год назад

So are you or your kid the One Piece fan?

@chrisbolt5350 Год назад

@@dainermade you should check in out. As a long time anime fan it is some great storytelling, but the character design and early seasons animation are a bit hard to get past.