No video :(

Paper Cone Speaker Repair- You Can Fix It!!!

Подписаться 458

Просмотров 1,2 тыс.

50% 1

This may be the most common "repair" to midrange and woofer cones. Pulling out dented dust caps is a close 2nd place. A tear/rip/hole in a paper cone can usually be repaired easily with what you have around the house. In this video, we show the process for what I call a "glue mix" repair where no patch is needed.
There are many variation of this repair depending on what material your cone is made from. The speaker driver's materials will dictate what supplies/glues you need to do the work.
For this paper cone, just use Aileen's Turbo Tacky glue, water, tape and a small paintbrush. An hour or so later, and you will be listening to clean music again.
--------------------------------------------------------------------------------------------------------
Please “Like” the videos and Subscribe to the New2U Speakers Channel.
Find, Fix, Listen & Love Used Vintage Loudspeakers
Located in Rochester, NY & Stuart, FL
Look for me and Say "Hi" at the local Thrift stores and Estate sales.
--------------------------------------------------------------------------------------------------------
Inventory on FB Marketplace: / 735675661
Follow on Instagram: / new2uspeakers
Website: www.new2uspeak....
Video Capture: Apple iPhone XR www.apple.com
Video Editing: www.apple.com/... on Apple 8th Generation iPad running iPadOS
Screen Capture .webm to .mp4: Freeconvert
Thumbnail Creation: AddText addtext.com/
Music Intro/ Outro: Sydney’s Skyline by ALBIS • Sydney's Skyline
Audio Measurement Toolset; www.studiosixd...
Music Audio Clip: ChaCha Fontanez; • ChaCha Fontanez
--------------------------------------------------------------------------------------------------------
Other Products shown of the channel;
Advent AV5
Advent 1008
Aet Center
Auvio Model 400016
Bose 201 Series 1
Bose 201 Series IV
Bose 201 Series V
Bose 2001
Bose Model 100
Bose Model 501
Bose 501 Series IV
Bose 901 Series V
Boston Acoustics Model A70
Boston Acoustics Model CR6
Cerwin Vega E-208
Criterion 444
Dbx Soundfield 3x2 LS Plus
Definitive Technology C-1
Eckman Model 303, 505
Energy E:XL-S8
EPI T/E 100
Genesis Physics Model 1
HHScott S-15
Jasco Model 411
JBL Bass 10 Subwoofer
JBL G300
JBL LX300
Infinity Reference 2000.1
Infinity SM-62
KEF iQ10
KLH Model 31
KLH TW-09B
Klipsch KV-1
Klipsch RW-8
Klipsch KSW-12
Mission MS-50
Mission MKII Model 70
Monarch Electronics
Optimus Pro LX10
Optimus STS-50
Pioneer CS-G204
Pinnacle AC 500
Pinnacle Monitor 200
Paisley Research 5.5
Polk Audio M20
Polk Audio PSW-505
Polk Audio RT55i
Polk Audio Surroundbar 6000
Realistic MC1000
Realistic Minimus 5
Rega RS3
Sony APM-X300
SS-WS82
Sony SS-CS8
Sony SS-CG-PX6
Technics SB-K25
Velodyne VX-10B
Yamaha YST-SW010
Zenith Allegro MC4000

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 10

@Mrsteve4761 Месяц назад

That the clear adhesive tape doesn't stick to the glue makes this an easy repair. I assume the repair holds up over time; have you had any fail? Nice job!

@new2uspeakers Месяц назад

Yes, this repair holds up very well over time. And compared to the cost of reconning a speaker it’s very affordable even if you have to have someone else do it for you. The thinned out glue works like the lignin in the paper making process and the key is using a minimal amount of glue. As long as you pull off the tape before the glue is totally dry, You’ll have no problems.

@wadegarret 11 дней назад

I used PVA glue and tissue paper to go over the rip or hole, I found it works ok for me but it's always nice to see other ways of repairing cones.

@new2uspeakers 10 дней назад

Yes, adding tissue paper when needed to replace missing paper is what I call a "patch" repair. In this cone, all the paper was there, so it just needed to be brought back together. I always try to avoid adding mass to the moving elements as that can change the sound output. Thanks for watching and commenting!

@anIntelligentAgent 18 дней назад

Hey there! Thanks for this video. I am trying to repair a tear in my Rega speakers, but I cant seem to get the unit off in order to access the back, I removed the screws but it seems to be glued on also. Do you have any tips for either taking the unit off the housing or repairing the cone if you cant access the back? Thanks in advance :)

@new2uspeakers 18 дней назад

If the drivers were screwed to the box from the front side, and you can’t pry them out because you think they’re stuck, that likely means they used a butyl sealant between the speaker frame and the box. It will come out, but you have to use constant, steady pressure to lift up one edge with a Corner of a putty knife or a screwdriver. Need to be careful not to damage the wooden edge of the box cut out. Slow steady pressure butyl will start to pull away and separate and then you work your way around the rim of the basket. Rega makes some great speakers so it’s worth the attempt.

@anIntelligentAgent 18 дней назад

@@new2uspeakers Thanks so much for the in depth reply! I'll give it a go

@ashscott6068 Месяц назад

Can't you just buy new cones? I got a couple of old Celestion silver series with torn cones. At least I assume that's what they are. They're not greenbacks or vintage 30's. They're from a 1978 Orange 4X12 cab. It still sounds fine, to be fair. It just bugs me knowing the tears are there

@new2uspeakers Месяц назад

@@ashscott6068 the answer is “maybe” as far as buying replacement cones. It really depends on each speaker model. There aren’t that many places that sell cones anymore. The dimensions can be quite unique for each model so you have to be careful when buying online. In addition, the time, and therefore the cost, is quite a bit higher to do a reconning job because it’s a significant amount of work to remove the cone, reattach it to the spider, center the voice coil, and refoam the surround. In fact, it’s usually cheaper to find a replacement driver on eBay that is not damaged. Thanks for watching and commenting.

@wadegarret 11 дней назад

@@new2uspeakers great advice, I put a chair leg through a JBL LE111A and was incredibly lucky to find a nos cone, spider, voice coil and dust cap off eBay. It cost a fair bit but I'm much, much more careful around my speakers. Like you say though, including fixing the speaker it would have been easier getting a used one!