Part 1 Convertible Top Installation Classic Car Ford Mustang Episode 171 Autorestomod

Autorestomod Manic Mechanic Gasoline Media

Подписаться 112 тыс.

Просмотров 124 тыс.

50% 1

Part 1 Convertible Top Installation Classic Car Ford Mustang Episode 171 Autorestomod
Part 1 of 2. We make a trip down to NPD to have Larry Galyean install a convertible top on a 1966 Mustang. Larry give tips on how to get good fit and parts that will be needed to make a good install.
Home page: www.autorestomod.com/ Rate, ask questions, we are very good about responding!
Thanks for watching!
Jeff Ford Contact:
Jford@autorestomod.com
Sponsor:
www.nationalpartsdepot.com
Tools:
Berry's Staple Puller
Heat Gun
Basic Tool Set
Air or electric stapler
Glue spray gun (if desired)
Weld spray-able contact adhesive
Parts:
National Parts Depot http:www.nodlink.com
Mustang Tack Strip Kit Convertible 51278-1B
Mustang Top Pads Replacement Style CP-56-A
Mustang Convertible Top Kit Tan 36 Ounce CT-56-D
Mustang Well Liner, Black WL-56-A
Mustang Mounting Kit Well Liner Concours 54600-1AK
Mustang Truss Head Screw Convertible Top 380348-S
Mustang Truss Head Screw Convertible Top Hex 380348-SR
Mustang Tension Cable Set Convertible Top Spring 52806-2
Mustang Weatherstrip Kit Folding Top Excl Hardware 53986-1
Mustang Nut Kit Convertible Top Weatherstrip 53986-1K
Mustang Tack Strip Front Bow 55 Inch 51278-1A
Mustang Pad Kit Original 4 Pieces Cotton 52875-1A
Mustang Mounting Kit Bow Listing Retainer Strip 50156-1AK
Mustang Retainer Strips Top Listing 2nd Bow 50156-1A
Mustang Tack Strip Set Top Material To Well 41745-1A
Mustang Mounting Kit Rear Tack Strips To Body 41745-1AK
Mustang Mounting Kit Well Liner Concours 54600-1AK
Mustang J Hook Set Convertible Top Clamp 506A48-2B
Mustang Side Bumpers Fold Down Seat (4) 372260-S
Mustang Coat Hook Set Chrome Incl Screws 29025-2A

Хобби

Опубликовано:

8 июл 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@SixtyFiveDropTop 10 лет назад

This is the most thorough, detailed demonstration of convertible top installation I have seen anywhere. God and the devil and both in the details, and this takes the dread out of messing up an expensive DIY project. Thanks gentlemen.

@reijerlincoln 10 лет назад

That's an impressive shop. Clean, light and HUGE.

@AutoRestoMod 10 лет назад

If you ever get to Ocala, Florida go to NPD. We recommend calling ahead to schedule a tour of the collection. Plan to spend a couple of hours--with over 200 cars, there is a LOT to see. And the shop is a dream to work in.

@RobHVAC 10 лет назад

Great video.

@MustangConnection1 10 лет назад

Great tips and great video as always, nice job guys!

@thunderbox6620 7 лет назад

remove and replace 1972 chevelle convertible top

@AutoRestoMod 7 лет назад

We have that in the works. Missed out on a Olds convertible a few months ago that would have been our source vehicle for that. Now we wait...

@tomf5376 6 лет назад

that bass line has been with me all day hahaa

@DaCoder 10 лет назад

Can't wait for part II :D

@jamaalwhite648 11 месяцев назад

Folding rear window is better than plastic

@rfreemanmodeling 7 лет назад

have you done a video for a fox body mustang? (79-93) I need a video for that.

@MillerMachineWorks 3 года назад

A good way to get around the rear tack bolts stripping is to use rivnuts instead

@AutoRestoMod 3 года назад

Good idea

@Edbert2004 6 лет назад

I'd appreciate a video showing how to install the items INSIDE the well where the top folds up when retracted.

@AutoRestoMod 6 лет назад

Could happen!

@EdBert 5 лет назад

At about the 9:50 mark I see the use of screws (8 total) to hold the pads to bow #2 and #3. My bows do not have holes for this but I can tap some pretty easily. Question is where can I get those screws and flat washers?

@AutoRestoMod 5 лет назад

Contact NPD, reference the video when you call. If that doesn't bear fruit, contact me and I'll help: jford@autorestomod.com

@dinomarati 8 лет назад

Hi Guys. Great show! Very good indeed. I have a guestion: I have a 63 Ford Falcon Futura convertible. I will attempt to install the new convert top myself with the help of your fantastic videos of course. Can you tell me if the convertible struture is the same as the 66 Mustang in terms of dimensions-- distances between the bars? Thanks, Mark

@AutoRestoMod 8 лет назад

+Mark Anthony Beinner Honestly Mark we're not sure. We'd recommend the Falcon club forum for a definitive answer.

@sspeedy2859 3 года назад

What size staples are used for the top?

@livingtrash24 9 лет назад

can you do this for a '65 corvette

@EastonMusicMinistrys 6 лет назад

Is it the same way for a 67 Mustang?

@quangb8448 4 года назад

I know this is an older video but can I just purchase a new rear curtain and replace just my old, yellow/cracked rear curtain? Will the new zipper work with the old zipper?

@AutoRestoMod 4 года назад

It might. Certainly worth a try. I've never done that before as usually the the rest of the top is trashed too.

@quangb8448 4 года назад

@@AutoRestoMod Thanks for the response. Rest is still in fairly good condition.

@jamesbiemer4310 3 года назад

@@quangb8448 - i have the same issue... how did it go for you?

@quangb8448 3 года назад

@@jamesbiemer4310 Sorry, never got around to it. There's always something else needing fixing.

@jamesbiemer4310 3 года назад

@@quangb8448 understood - thanks....it seems like a difficult repair for sure.

@ninedrvr 2 года назад

Just curious as to why the parts list shows the full pad set but only the side pads were used? Why leave the quarter pads out when Ford used them originally?

@AutoRestoMod 2 года назад

Man, that video is 8 years old. Hard to remember what the plan was.

@zeddreppelin9483 8 лет назад

Is that a fart at 1:56?

@zeddreppelin9483 8 лет назад

+Zed Dreppelin nope, hes clearing his throat

@AutoRestoMod 8 лет назад

+Zed Dreppelin Or was he?

@davidyj9013 5 лет назад

WOW! Just like Computer 101. There is so much information that is not shared or even mentioned because it's assumed that the viewer knows something. I know NOTHING, therefore unable to follow the tidbits of info offered thru the eyedropper. Was hoping to find step by step instructions from the beginning but that would take to much time so I guess I'll have to fill in the blanks myself. Computer 101 didn't help either.

@AutoRestoMod 5 лет назад

David, sorry that you find it less than helpful, we strive to cover every jot and tiddle, that is why this is a two part video.

@davidyj9013 5 лет назад

Didn't watch Part 2. Does it fill in the blanks left open by Part 1? What was used to determine the proper spacing of the bows? They also mentioned not putting the pads to low so they wouldn't be seen after the new top material is installed. How did you determine where that line is supposed to be? Is all that covered in Part 2?