No video :(

Part 1: Filling Stock Motor Mount with Polyurethane / Liquid Urethane Inserts (Scion tC2 / tC2.5)

Подписаться 7 тыс.

Просмотров 30 тыс.

50% 1

⚠️ 4 Month Update: • Part 2: Filling Stock ...
🛒 Product link(s) at bottom of video description.
► 00:38 - Removing bump stops
► 02:32 - Applying Contact Cement
► 03:20 - Applying Duct Tape
► 05:20 - Preparing for Pouring
► 07:24 - Baking the Mount
⚠️ Note: Do not use your food oven when baking the polyurethane. Also, the oven temperature mentioned in the video is in the Fahrenheit scale.
I made this video for 2011-2016 Scion tC owners who want a stiffer motor mount but cannot find any after market mounts. You can simply fill your stock motor mount to make it stiffer. This is only part 1 of this review as I haven't had time to install this mount because I'm still testing out the casted bushings I made at • Casting Polyurethane M... .
🌐 DIY Motor Mount Guide: www.suspension...
🛒 Liquid Urethane: www.suspension...
🛒 Goo Gone (good): amzn.to/2vhizsE
🛒 Goof Off (better): amzn.to/2H2USHl
🛒 Hamilton Beach XL Oven: amzn.to/2FxJIJU
🛒 Oven Thermometer: amzn.to/36HgAMd
☕ If you find this helpful, you can buy me a coffee at ko-fi.com/vamp....

Опубликовано:

13 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@MsAZZEY 4 года назад

hey Derrick just wanted to say I really enjoy the content! really sparked my interest in installing mods for my tc2 and have used your videos as a reference/ guide. keep up the great work !

@VampyreX13 4 года назад

Thank you!

@nicolasoliveres1037 8 месяцев назад

Thanks for this tuto ;)

@lusoprazer 2 месяца назад

Bonjour, Loctite est un adhésif polyester ? Ton produit est un Urethane liquide, cela veux dire que c'est la même chose que du Polyuréthane ? Ton produit peux être appliqué directement sur le caoutchouc ? Merci pour tes explications.

@VampyreX13 2 месяца назад

L'uréthane et le polyuréthane sont la même chose et adhèrent directement au caoutchouc.

@carsonzhang5014 3 года назад

it cant orbsorve vibration at all

@juandelgadillo2795 4 года назад

Donde puedo comprar ese producto

@VampyreX13 4 года назад

Links are in the video description.

@juandelgadillo2795 4 года назад

@@VampyreX13 donde dijo

@MsAZZEY 4 года назад

Hey Derrick ! Weird question .. but would u sell your stock motor mount with the urethane in it ?

@VampyreX13 4 года назад

No, I'm holding onto that as a spare. I actually still need to install it and test it out. I wanted to give the bushing a few months before I swap them out... which is probably going to be this weekend.

@MsAZZEY 4 года назад

@@VampyreX13 got ya! i see, then ill be looking forward to the review if you are planning to do one! hope all is well keep up the great content .

@najjara76 2 года назад

Hi, I want to ask you how many mount I could do with this kit?

@VampyreX13 2 года назад

There should be enough to do a full set of engine mounts.

@joelo.nchirinos3581 4 месяца назад

Hello, will this generate any vibration in my car?

@welcometoreality3450 4 года назад

Did you degrease it before trying the pour?

@VampyreX13 4 года назад

I used alcohol to clean it.

@welcometoreality3450 4 года назад

@@VampyreX13 u found alc...lucky you lol. did mount work well?

@welcometoreality3450 4 года назад

@@VampyreX13 didi u consider using less poly for less vibration?

@VampyreX13 4 года назад

I haven't installed it yet. I completely forgot about putting it in while I was working on the car this weekend. As for less vibration, you would just use a polyurethane with a lower shore value. This was the actual hardness I was looking for though.

@welcometoreality3450 4 года назад

@@VampyreX13 Think i would go with 80 bc theres already rubber in the mount which decreases the overall shore rating

@irisbaez1972 Год назад

Vibration? hell a lot. I did this on my Elantra 2008 and it was the biggest mistake I ever done. I had to replace them again for stupid. Well, at least I know what mean to be stupid.

@VampyreX13 Год назад

I didn't fill any of the engine mounts that support the engine, just the one that helps keep it from moving back and forth when you accelerate. That's why you've got so much excess vibration.

@irisbaez1972 Год назад

PLEASE, WHO EVER READ MY COMMENT: DO NOT MAKE THIS STUPIDITY.