Part 2 - Gaahleri GHAD-39 Airbrush -- my NEW workhorse!

Подписаться 8 тыс.

Просмотров 4 тыс.

50% 1

GHAD-39 Real World Test Pt2 -- Following up on Part 1 spraying primer, I swap in my Iwata HP-C+ .3mm airbrush for a direct comparison test and refresh of baseline feel. From there, I switch back to the Gaahleri .35mm GHAD-39 setup and start to apply the first round of painting on the 1/35 GAZ-67B test model. It's a good time to be a modeler!
Link to Part 1 GHAD-39 test: • Part 1 - Gaahleri GHAD...
AIRBRUSHES ~
GAAHLERI affiliate -- www.gaahleri.c...
SUBSCRIBE & SUPPORT ~
Books: www.rinaldistu...
Instagram: / rinaldistudio
Patreon: / rinaldistudiopress
BRUSHES & PAINTS ~
KINGART affiliate -- www.kingartco.com?ref=PWAoY
Main brush:
9020 Series, Golden Taklon Ultra Round #2 (5-6x recommended)
Blending brushes:
9400 Series, Golden Taklon Angular Shader - 1/8 size
9120 Series, Golden Taklon Flat Grass Comb - 1/8 & 1/4 sizes
Additional recommended brushes:
5/0 Spotter, #2 Filbert, #2 Shader, #0 Chisel Blender, 10/0 Liner
OIL PAINTS ~ Gamblin 1980 Series
Titanium White & Buff
Olive Green
Neutral Grey
Payne's Grey
Van Dyke Brown
Transparent Red Oxide & Yellow Ochre
Chromium Oxide Green
Prussian Blue
Lamp Black
Gamsol Thinner (Odorless mineral spirits)
Paper Towel (white to see colors used)
Hair Dryer (low heat setting)
MUSIC LICENSE ~
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/k...
uppbeat.io/t/k...

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@NarcolepticLTD Год назад

I'm glad to see an affordable option actually hitting the market. If I didn't already have a full flight of iwatas and was just about to spring on my first airbrush... I'd hope someone pointed me in this direction. (Love my iwatas though)

@Jeff-cv4qn Год назад

Exactly

@DarksouIjah Год назад

I bought this exact airbrush on Amazon Prime day for less than $30. Best airbrush for it's money perhaps ever...

@rs.p Год назад

Literal score! And I would agree 100%

@DarksouIjah Год назад

@@rs.p And like the box it comes in and the parts box art on the inside as well. They did this airbrush proper.

@wingkuenwong7187 9 месяцев назад

在中國和香港,只需22美元左右

@briancollins6543 6 месяцев назад

Brilliant video thanks. I'm looking to buy this airbrush so enjoyed your videos. I am a slow reader and found I had to keep pressing pause as the captions don't stay up for long.

@AdamMann3D Год назад

Every time you post one of these I go to buy it, remember I spent $65 on a new Neo for this exact reason in July and talk myself out of it. I will I swear.

@rs.p Год назад

Hah, don't sweat it too much, as these will be available at this price for a long time. Fair warning Part 3 is coming ;)

@PouponFred Год назад

Thanks for the video Mike. Appreciate so much to see your work and the advise for help! Best regards from France 👍

@rs.p Год назад

My pleasure! Bonjour et merci!

@lesthiele4921 Год назад

That loks to be a great airbrush, I may have to look at purchasing on, thanks for sharing this review, best regards from Australia 👍👍👍👍

@rs.p Год назад

Glad it was helpful!

@aim9guymodels74 Год назад

Pulled the trigger…cant beat that deal.

@paulysworkbench Год назад

Yep. Definitely going to pick one of these up. Thanks again for a great review, Mike!

@rs.p Год назад

Awesome, you're going to love it

@robbie.205 Год назад

Very happy. Beautiful built airbrush, especially after factoring in the price point. Mine came in the mail yesterday. Broke it down and and checked all the parts. Tonight is airbrushing night.😊

@rs.p Год назад

Good times! Enjoy 🙌💯

@stephencorbett4307 Год назад

Seems like a decent airbrush at a great price. Would be a good introductory brush for beginners on a budget. Thanks for the review and look forward to part 3.

@rs.p Год назад

More so because usually low-end airbrushes can cause more issues than help for new painters, and having a high performance value-priced option to learn with will go a long ways towards those buyers seeing success sooner = more enjoyment, longevity with the hobby, etc. Another topic we probably don't discuss enough and I'm happy to see this level of product available today to bolster growth.

@stephencorbett4307 Год назад

Only having a small amount of airbrush experience myself I think I will probably invest in one of these to help me gain more experience before investing in a high end airbrush. As you said beginner's can see success sooner and getting enjoyment from that makes the learning experience easier to absorb and expand on.

@rs.p Год назад

Wonderful and keen to see this process, feel free to update me later on. Thanks Stephen!

@stephencorbett4307 Год назад

Thank you for that, I will 😊

@htc4898 Год назад

Thank you.

@rs.p Год назад

You're welcome!

@jdxah Год назад

Really like the video and all the information you're able to impart while talking through all your actions. Very well done. I will say I have this airbrush and I don't like it. The trigger is loose and floppy and have to pull it back too far in my opinion to get paint to flow. I own 3 other airbrushes from 3 different manufacturers and for each of those, when picturing the path of an airbrush trigger, I have to pull back no more than 25% to 30% to start paint flow. For the GHAD-39 it's at least 60% to 70%. Not only is this tough to get used to when swapping airbrushes often but varying the volume of paint during a painting session is much easier with a 75% trigger swing remaining than a 35%. I'd love to know if other's GHAD-39s have the same trigger pull as mine. If not perhaps this means my airbrush has an issue. Another issue I have is this is the only airbrush I own that when I place my finger on the trigger, it is "wedged" against the paint cup. 3rd complaint is the design of the paint cup. The paint schute for lack of a better word, is very deep or long and getting a qtip or bit of paper towel down in to the little puddle of paint around the needle not as effective because the long narrow schute limits the range of movement of said implement. I'm not an expert when it comes to airbrushing but I wouldn't consider myself a beginner either. rinaldistudiopress obviously has far more experience than I and his opinion should be given much more weight but I don't see a reason not to give out a second opinion for free as that's what a comment section is for.

@rs.p Год назад

Thanks and honestly reach out to Gaahleri direct, they’ll be more than happy to assist. That’s what they’re there for and support customers 100%. I suspect something isn’t seated properly or loose, but not having the airbrush here to disassemble myself I wouldn’t know for sure. If you’re capable, simply disassemble, double check installation and tighten accordingly as you reinstall the parts. My guess is the locking nut on the rear end of the needle isn't on properly and the needle isn't seated where it should be, and or the nozzle is loosely fitted under the cap and needs to be re-seated as well. It’s a natural part of cleaning anyway and all airbrushes are designed to breakdown in that manner. Good chance it fixes things, if not I’d contact Gaahleri. I picked up mine on my bench here and see or feel none of what you're describing and you can clearly the action in the videos while I paint and clean, including the needle and nozzle installation. On the cup design and feeding chute into the airbrush, I mentioned the same to them and it was noted for future development, as yes it's a bit harder to clean down in there because there's a couple sharper angles at the junction. Albeit nothing major if you stay on your cleaning chores, as I note repeatedly. Lastly, I'm holding the airbrush in my hand as we speak, and the distance to the cup where the finger rests on the trigger is the same across all of mine, so not sure what's up on your end. In fact, overlaying it over my HP-C it's identical dimensionally in that area, also easy to see on the videos too.

@gaahleristudio Год назад

Thank you for taking the time to share your detailed feedback with us. We value every piece of input from our customers as it helps us improve. I'm genuinely sorry to hear about the issues you've experienced with the GHAD-39 airbrush. Your feedback is crucial, and we take it very seriously. We understand the importance of ease of use and consistent performance when it comes to airbrushing tools. To address your concerns, we would be happy to send you a brand-new GHAD-39 as a replacement. We hope that this gesture might alleviate some of the challenges you've faced with the original unit. It's our top priority to ensure that our customers are satisfied with our products, and we're committed to providing the best possible after-sales service. Again, thank you for your valuable feedback and for giving us the opportunity to make things right. Warm regards.