Do you have one of the greatest ride-ons ever created and it is dead? Probably has a bad main control board and unfortunately, replacement boards are no longer available. In this video I go over a cheap and fairly easy repair option using the stock gas pedal and a common scooter controller. check it out and leave a comment below if you have any questions. Here is a list of the parts used in this repair. Using the links to make your parts purchase helps us make future videos by providing a small affiliate commission.
1000 watt Controller- amzn.to/3GIe4KK
batteries- amzn.to/3VglpVW
40 amp relay- amzn.to/3ECcQxR
step down converter- amzn.to/3U2PHKC
Anderson Power pole kit- amzn.to/3hXie6T
10 awg silicone motor wire- amzn.to/3V5c8QB
12 awg silicone wire- amzn.to/3UZuZwq
Automotive pin connector kit- amzn.to/3guQ8j1
Key switch- amzn.to/3Xwq0Fl
36 volt lead acid charger- amzn.to/3V2V0en
Charge port- amzn.to/3ECwWb6
N/C micro switch- amzn.to/3i9RDnp
xt90 battery connector- amzn.to/3XlSXDE
40 amp breaker- amzn.to/3idnHGI
Pin connector crimp tool- amzn.to/3tTwO2b
10 авг 2024
