Pentair Screenlogic 2 Transmitter tips and tricks

Подписаться 31 тыс.

Просмотров 71 тыс.

50% 1

This video is a quick tip guide to making sure your Pentair Screenlogic 2 Transmitter or Screenlogic 2 antenna is working at it’s optimum. We’ll give a few tips on where to hang it, which Screenlogic 2 transmitter is best for you and things to watch out for when installing this with Pentair EasyTouch so you don’t burn anything out.
Swimming Pool Science is a full service Pool, spa, and fountain repair and maintenance company located in Phoenix, Arizona 85018, 85016 . Locally we provide weekly pool maintenance both residential and commercial, pool repairs including Filter cleans, pump installs, filter installs, heater installs, automation system installs, variable speed pump installs and programming, acid washes, filter cleanings, sand changes, green pool turnarounds, and Pool 101 classes for homeowners. Nationally and internationally we provide phone consults, video chat consults, and pool 101 classes and Pool advice.
Like us on Facebook at: / swimmingpoolscience
Subscribe to us on RU-vid at: / swimmingpoolaz
Instagram: @swimmingpoolscience
To schedule a pool 101 or phone consult, you can call or text us. Our phone number and email can be found at: www.swimmingpoolscience.com
Media requests, stock footage, video licensing, and other inquiries, please contact us at swimmingpoolscience@hotmail.com
ALL RIGHTS RESERVED. Any unauthorized use of this video or screenshots of this video is prohibited by copyright

Хобби

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@herbertperez4082 4 года назад

Great video!

@13lizzy13 2 года назад

I changed the battery in the top part of my easy touch panel and the wireless began to work again. It was the CR3023 battery.

@bfb3086 Год назад

Same, you saved me huge money!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@michaelgrosh3377 4 года назад

Is the black one with the antenna the newer version? or is the white one without an antenna newer. I have a company send me the white one and said its the newer version (antenna one is older)....

@silroc88 2 года назад

Josh, Great video. I have a question on part numbers. My transceiver on the outside of the house is toasted. When it is plugged into the logic board on the screen logix, the 3v relay trips and turns it all off. When I remove the wifi transceiver from the RS port, everything is fine. So i assume the board in my transceiver is toast. So i am considering buying a new or used one. However i cannot seem to find the proper replacement part number. The one I have inside my housing is BLUE color with an antenna and it said LAIRD. on it. But all the PCB's I see online are green. Is this a true replacement for my blue one (520946Z)? I guess another option is to ditch this method and use a wifi repeater - correct? thanks for amazing content!

@chrish4865 Месяц назад

What is the power supply for the outdoor antenna? The small coin size battery?

@AquaTech225 4 года назад

Good stuff just faced this same thing with an customer

@ryanison5044 3 года назад

If the WiFi ssid is changed how do you connect to the new ssid?

@cpiscitelli1674 Год назад

Hi....I have the pentair easy touch system with the app. My pool is 4 years old. All was working fine up until last week. From the app i have no problem controlling the pool, my spillway, the heaters, lights and other landscape lights hooked up to the system. BUT just this week, all of a sudden, I cannot get the jets in the spa to open, stay on with full propulsion . I get a little bubble of water in all the jets and then , low flow. My pool guy was here and he checked all , we got the jets flowing at full force, so we know there is no blockage in the jet lines. We turned them on and off from my phone app while he was here and it seemed fine. Then of course, an hour after he left, i tried to turn the jets on and NADDA!!! I'm stumped. Can you help ?

@jeremyguillory8304 2 года назад

It looks like the person that installed the outside antenna pulled off the ID sticker. Any way to look up that number?

@vegasranger 4 года назад

I have this system but I can only control it though the app at home. Is this system supposed to work remotely also? If not can you point me in the direction

@miguelvasquez3279 3 года назад

We have the same problem...my wife said you have to contact the number on router so they can unblock the fire wall...

@garytraina6057 Год назад

What is the part number for the high power receiver on the left??

@joer5000 2 года назад

I changed my wireless network and now I can’t get my mobile app to connect with my easytouch system. Any ideas?

@roxsanahadjizadeh8353 3 года назад

Our iPhones used to work fine but now shows connection and turning on the pool or waterfall or Lighting but nothing actually happens. What is wrong? Do you think it is outside transceiver that was installed on top of control box?

@SwimmingPoolAZ-SPS 3 года назад

There could some kind of interference issue. They want you to install the antenna a few feet away from other electronic/electric devices for both antennas.

@CarmenRodriguez-bx9tx 2 года назад

Question when closing pool for winter do these 2 units stay connected or should I disconnect being that pool is shut down

@SwimmingPoolAZ-SPS 2 года назад

Either/or

@paulmatusik9690 4 года назад

lights are flashing but screen logic app says "searching for system controller" any idea why?

@SoCalWatcher Год назад

Seems like it would have been less expensive to have the home owner put in a single mesh network or one wifi extender in the house.

@AZTechLabs 3 года назад

i bypassed the WIFI and wired with RJ45

@SwimmingPoolAZ-SPS 3 года назад

Sometimes that’s the easy way to go for sure.

@IrishTR210 4 года назад

What an expensive solution for a WiFi range problem that could be solved for under $100 by improving the entire home's WiFi not just this item. Instead this junk ran over how much money? Esh

@garryhurkens 4 года назад

I don't think these are using WiFi...

@SwimmingintheDeep 4 года назад

You are spot on. This expensive solution is not needed when you can use a $20 wireless network adapter and achieve the same thing $480 device he mentions. Here's a video of how to do that... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8o74R0HZ3nw.html

@SwimmingintheDeep 4 года назад

@@garryhurkens but you CAN use wifi to do the same thing. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8o74R0HZ3nw.html

@mperez738 7 дней назад

I agree with irishTR210, this could have solved with with a WiFi WAP! That cost less than $100. Instead the pool guy took advantage of the home owner charged them and arm and leg for a simple solution!

@damondelgado4603 2 дня назад

@mperez738 the protocol adapter lets you sync to the app. It's useful when converting from a handheld remote to your phone app, but i agree. If its a range thing, this is not the right equipment for anyone with that issue.