It’s a sound idea to use magnetic energy to run a stater type motor. If it can run at an acceptable RPM with enough torque to turn a generator, then we would really have something. I hope someone figures it out.
This is the first one I have seen with shielding so there is obviously some usable power to spin at that rpm but as you can see by the speed of the start up The torque is virtually non existent which means fuck all usable power. If you made one the size of a house you would still be doing fuck all
Well If a working on turns out not to be a fraud then getting enough torque to turn a generator will only be a question of scale of the motor an wether or not it can be easily scaled up in size.
@@xapplimatic if a workong one exists then i want to see it here and there should be no battery,no electrical wire,no hand,no compressed air,no charged capacitor,no cadles with fire,no, it should start and run only from magnet and without any external help. BTW i fucking hate how those terms getting mixed overtime because a nagnet motor or a permanent magnet motor should work without electricity but a electric magnet motor should require electricity to run ,however i make no distinguish between electric motors or electro magnetic motors as they both require electric power to run,so theres nothing exceptional about electric magnetic motors at all as some do claim.
Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs related to angular energy continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will walk with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet.
Thee are ways that exiting magnetic fields (the opposing magnetic side) can be made weaker than the attacking magnetic fields by means of imbalanced system magnetic design.
The whole idea of such magnetic motor projects and videos is to demonstrate working prototypes. If you are not open to such a possibility, perhaps you should find something else to do that is useful.
For a while the “camera” refuses to show the other side, plenty of time to wind it up, also when he “put it into gear” it was perfectly still for several seconds, magnets don’t hesitate.
The design they are in can take a while to overcome hysteresis at the early stages. It’s not about the magnetic being decisive and quick reacting, it’s about the built-in dampening effect of the gears, bearings and levers the magnet is hooked up to or the time required for a static object to overcome inertia under a weak magnetic influence especially if it depends upon a feedback loop effect changing the magnetic flux field as the wheel starts to rotate at a rate slower than the eye can initially see, it may take some time for the added flux to make enough difference the motion becomes substantial enough to be noticed by the eye before the magnetic field can fully break the wheel free from its stopped state of inertia and magneto-mechanical hysteresis..
Well, my graduation project was a magnetic power generator. It had same principle but different design. I did study the magnetic field and other stuff such as angular velocity, power, torque..etc . Our goal was to control the rpm and how much is the produced energy. In theory most worked fine except that we got some no sense values sometimes. When we prototyped it , it failed to work 100% . The magnetic field was too much to handle. We tried everything, isolated the magnets using Aluminum and copper , reducing magnets quantity and even we tried to make wider space between magnets. None of that worked 😖. We used Neodymium magnets grade N52 . At the end we just submitted the reports showing how in theory it worked while it failed in reality and we passed but with an acceptable grade :( not even worth the time we spent on this project. But magnets can generate electricity for real in some simpler ways.
In most models, I see so magnets of the same strengths being used. What if there were 2 layers of magnets: First layer being the induction coil magnets, Second layer being the drive magnets.. But slightly more powerful to defeat the force of the current being created? Just a thought. I only ever see single layer projects.
@@Jandejongjong Yeah If Held next to each Other but you vorher, that the pushing ++ Kombo is nearer to each Other than the opposing Sides - to the other plus Pole, that means the pushing is stronger. But If Not processed correctly IT will in deed only Spin longer before or quits but Not rotate forever.that IS difficult achieve
If everyone watching donated me 30$ Now i could buy Mike's motor for 1 mil , so then we can send the motor over and over,you have to pay shipping cost though and ship it after 2 days,so everybody can have it's turn
This may be off topic, but I think someone might find it interesting. :) Device to end the creation of Nuclear waist. Step 1: calculate how much energy you need pumped into an electric motor to make a vertically positioned circular platter with magnets in-bedded horizontally around it's left side and right side (so there pushing force is pushing out sideways relative to the vertically spinning disc) to spin as fast as you need it to. Also better to make sure these magnets are shielded around their sides & back with metal that has high permeability so the magnetic field they are emitting is focused fully out sideways. :D Step 2: Calculate how many sets of copper coils you need to be interacting with magnetic fields to achieve this & to perpetuate more electrical current flow then is needed. :D Step 3: Build a round horizontally positioned platter covered in all these copper coils pointed down that does not move (Is stationary) :D Step 4: build a round platter covered in powerful magnets pointed up that can spin and place it directly under platter with hanging copper coils. :D Step 5: Position the vertical platter that is motorized close to the horizontally positioned platter covered in magnets pointing up so that when the vertically positioned platter spins the in-bedded horizontally positioned magnetic fields slam sideways against the edge of the horizontally positioned platter causing it to spin. :) Step 6: Make sure enough of the copper coils are feeding their electrical current into the electric motor and the rest of the copper coils are linked into a set of rechargeable Battery's placed in the closest most convenient spot. Step 7: Build a duplicate setup of horizontally positioned discs with hanging copper coils and disc with upwards facing magnets and assuming the first set of discs are positioned to the front left side of vertical spinning disc, position the other duplicate structures to the front right, the back left and the back right of the vertically positioned motorized disc. As the vertically positioned motorized disc spins the horizontally in-beaded magnets will now hit into all 4 horizontally positioned discs causing them to spin. so you will effectively be using the spin of one disc powered by one electric motor to spin 4 constructs that are each generating electrical current. now build this whole setup multiple times over and use the current perpetuated by it to power up scaled electromagnetic generators that are equal to or more powerful than the ones used in a nuclear power plant. You will now have a device that is self perpetuating off of it's own electrical current perpetuation and no nuclear waist to worry about.
Energy from magnet can be obtained without any mechanical movement. All we need is material capable of being converted from magnetic to nonmagnetic when applying electrical impulses. This will simulate the rotation of the armature in the generators. Such a material was created for other purposes and there is technology. More info ?
Yes, please giving me more info about this material - it is always my problem to build an real named magnet-engine. (Please excuse when I probably make mistakes in the correct writing - it's a long time ago I was using englis in school.)
@@christofgehring8695 Hi Christof. Sure I can give you all info I know. First of all the theory of spinning electrons. But for diagrams/graphics I will need your address. By the way English is not my native too.What language do you speak?
@@vigramm Hi, thanks for your quickly answer at first. I am from Germany and speak german. I think I can write you my kompleet address here on youtube (What do you think?) If sombodey other read it and if they want to write me - no problem : ) But now at first I have to do my work at home (I have some goats, sheps, horses , dogs ...
The circumference and diameter of the strator is larger and it is not possible to adjust the distance between each magnet (half its diameter) like a rotor
Kita semua dibuat pusing oleh pencipta free energy magnet, lebih baik kita beli saja bila nanti mereka sudah selesai menciptakan nya, sekarang mereka mencari keuntungan dari video yang kita tonton..."
FREE ENERGY = FREE MONEY. WHERE IS THE MONEY? "Hey Rocky, watch me pull a rabbit out of this hat!" "Bullwinkle, that trick NEVER works." "This time for SURE!"
Hell yeah Mike! That's one bad fucking machine you get there. And I don't care what anybody says the days of people talking about what they built me how it works and what it's made out of her over. I think you found the missing piece the over unity community has been waiting for.... hard ass beats and some cinematography. By the end of the video I believed The permanent magnet motor generator perpetual motion bad ass machine had special powers and shit no doubt!
Fragen...über Fragen.... wie sind die Magnete angeordnet? Auf abstoßend? Auf anziehend ? Wieviel Steigerungen hast du auf jedem rotor? Sind es diametrale Magneten?
Keep it up remember the time of write brother some chootya barking on them but they fly and made airoplane same u will get some ediet prople this time also keep it up
What you need to know is that FREE ENERGY IS REAL. 100% REAL. But you can not get energy just from magnets you need help and that is an small elektromagnet is needed to help over the magnet luck which no one can find a solution, and the electro magnet must be as strong as the amount of cupper which produces load. then you have a free energy machine....
я тоже почти такого типа генератор разрабатываю на изоляторе, изначально по принципу включил и забыл так как не знал как его останавливать а тут на видео понятно статор двигают а я раньше думал как-бы ротор двигать а все оказалось проще простого. Да и принцип работы тут не понятен я имею ввиду на счет магнитов хоть они и в изоляторе (копролон) не понятно для чего 2 вида стержней (толстой проволоки) на статоре если они замыкают контакт магнитов между собой то это разрядит полюса на магнитах со временем тогда нет смысла на изоляторе было строить всю систему, на моей схеме нет такого. (к счастью магнитную силу можно восстанавливать ю-образным магнитом с намотаным на него проводом)
Why, if you have a ground breaking prototype wouldnt you record with proper audio and instruction, no you play music to hide soimething..perhaps the sound of a motor?? Then ppl wonder why we are suspicious of these..enough with the BS allready..
@@michaelparlby7315 BECAUSE The Powers That Be, WILL NOT allow it to be out. It will screw up their Energy Monopoly, big time, trillions of dollars at stake. So, money speaks. That's why the dumb Arabs were able to reach where they'd never, without the huge revenue from Black Gold.
"the powers that be" lol Im an engineer and i can tell you everyone who was an engineer at some point has thought about free energy, we all just read a little to learn you cant do it and if you could one of the millions of us would have and patented it and would start selling it. MOst people in these comments need to GIVE UP AND JUST GOOGLE BASIC PHYSICS
I watch all that videos and you know what is the amazing ? All this guys they thing that all the people on the earth are stupid and this 5-6 guys from ( Banglatesh , India , Pakistan and more ) are the most clever on the earth !!!! Well done guys you find the free energy From all the earth a big thanks !!!!
I'd like to see you prove that. they said flight was "impossible" yet I have gotten onto many planes. you people need to stop with the this is impossible crap. wether something works or not doesn't mean something is "impossible"
Help me understanding the words in this video of magnet motor ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-u96qBFVMeEU.htmlfeature=shared, less than 1 minute video
Quels types d'aimants avez vous monté ? auriez vous un plan, dimension générale de l'ensemble, position et angle des aimants, je suis aussi en train de fabriquer ce type de moteur magnétic. Merci d'avance. Stéphane
Why no talky talky? Seems to me that if you can't talk about it you can't explain it. Can't explain it then it's not working. If it's not working, no talky talky. Am I wrong wrong dork dork?
There is no material that I am aware of that can actually block a magnetic field. That being said though, a magnetic field can be 'bent' or 'redirected' after a fashion. I've never tried it, but homemade magnetic shielding should be fairly easy to make. For example: a relatively small amount of iron dust mixed in with some kind of epoxy, and molded to the proper shape, should do the trick. It would take a bit of experimenting though to get the proper ratio of materials, as well as the ideal shape. The general idea is to bend an unwanted magnetic field in a different direction, while using a minimal amount of ferrous metals (Nickel, Iron, Cobalt) to avoid creating strong attractive forces that can be counterproductive to the overall goals of a particular project (e.g a magnetic motor).
@@Lacostta2 Mixing iron with lead would work. Discovering what ratio of materials would be the slow and tedious part, so personally I'd use some kind of polymer, or maybe even a silicone base during the testing phase. Once a person knows how much ferrous material is needed, relative to the strength of the magnetic field they want to bend, almost any rigid, or semi-rigid, non magnetic material would work as a foundation.
THERE IS NOT SUCH THING AS FREE ENERGY THERE IS A COST TO BUILD ANY PRACTICAL MOTOR! WHAT I CAN'T UNDERSTAND IS WHY NO ONE GETS' IT RIGHT. NOT ONE OF ANY I HAVE EVER SEEN ON RU-vid OR IN PERSON SIMPLY DON'T WORK THEY ARE NOT SELF STARTING AND HAVE USABLE TORQUE. NOT TO THOUGH COLD WATER ON YOUR EFFORTS BUT IT IS POSSIBLE WITH THE RIGHT MAGNETS !!!!
You need two rotors, each rotor needs two layers of magnets, the layers MUST BE ALL set to 60°. You can use lie E8 theory diagram as a simple instruction book, the layers in the diagram represent the dimensions you will need. Align magnets NORTHSOUTHNORTH SOUTHBORTHSOUTH If you use diametrically charged magnets this will be more efficient. Also place magnetic rollers wrapped in copper (eddy currents) between the rotors to remove friction and wearing parts. For a visualisation check out the searl generator. I wish you good luck. 😉
Well done! Many attempts just few successes for the Peredeve motor. It works with repulsion so in little time the Neo's will Die.lol Attraction Guys Attraction!
I look at tons of these videos and they all have very carefully composed videos. You would think after all this time these videos wouldn't cover all possible angles at the same time a remove all doubt. But, nothing more then a Big Foot sighting.
