Pexmor extreme 26x4.0. 500w ebike from Walmart, my thoughts. 

No problem buddy, I'm just glad you got some help from my videos 😀

what it cost you & how long charge last& how long to charge

I just bought mine in the mail and I love it it's in the Shop right now getting some adjustments

Lol yes, I'll going to do something for him

P01 - Screen Brightness from 001(low) to 003(brightest) P02 - Display units, 0=KM 1=Miles P03 - Battery Voltage 24/36/48/60 (used to calibrate the remaining battery meter on the display) P04 - Display sleep time 0=does not timeout, otherwise in minutes P05 - How many PAS levels (0=3, 1=5 levels, 3=9 levels) P06 - Wheel Diameter (in inches) P07 - 0 to 100 Number of speed magnets (I use 81, others say 80 works for them) P08 - 0 to 100 Speed limit in KM/Hr (needs external hall sensor, 100 = no limit) P09 - Non zero start (0=Throttle works immediately, 1=need to pedal before throttle is available) P10 - Drive Mode (0=PAS only, 1= Throttle only, 2 = Both) P11 - Boost Sensitivity Delay for PAS ( 1 [quickest] - 24 [slowest]) P12 - Boost Start Strength (acceleration strength 0 = no acceleration, 5 is max) P13 - Number of magnets in PAS (5 to 12) P14 - Controller Current Limit in amps (1 to 20 - though 15 Amps is optimal for a single battery setup) P15 - Controller voltage lower limit (000.0 to 200.0, controller shuts off when battery voltage is under this value) P16 - Odometer value (used to clear odometer, press [+] for 5 seconds and it will clear. P17 - Cruise Control (0=disabled, 1=enabled) When enabled holding down the throttle for a few seconds sets the speed. Press the throttle twice, or use the hand brakes to turn off cruise control P18 - Speed adjustment (from 50% to 150% - 100 = no adjustment)

Now your nephew's bike may not have all of these settings available, nor should all of them be adjusted. The ones to focus on would be P08, P12, and P14. P18 is used to tweak the spedometer should it be slightly off. Oh if there is a P19 or P20 don't touch them as they deal with communication protocols and hub types. I am going to say this - I built a bike, for my daugher down in Key West, with similar specs to this one only with a 36v battery (but still 500W - 15Amp) 21mph is the top speed with a full battery so I don't expect too much more from you nephews bike.

Oh ok when he come back I'll do that

Oh yeah fir sure 💯💯

Ok thank you for the information I'll definitely do a follow-up on this bike

cant you change the speed limit for that bike too? if i looked everything up right theres a menu that allows you to change the speed cap to 40km/h (24.8mph)

Oh yeah it's definitely not bad at all just a few tweaks and adjustments will be killer

Thank you I definitely see now

I loaded 50lbs of cargo ( just paper of flyers and local newsletters for neighborhood community) and it started to tilt of the kickstand metal end bending or warped, lol. Mann I had just bought that heavy duty kickstand too. I ended up re bending back the kickstand end and kept cargol oad at 35.lbs with the rest of pounds in backpack. It was like watching magic of seeing the kikstand bar end bending slowly, 3 inches of bend.

There are MAJOR HILLS in San Diego and the higher watt ebikes too expensive for me and reasons why I buy low watt gear motors to have a DIY Conversion kit high watt motor to be able to fly up hills.

Yes, it's definitely affordable

Thank you 💯 we going to modify it soon

You is correct. I might do that tomorrow and see how accurate the display is

The wheel just needs to be trued, I think.

@AaronHendu that's what ebike builder said but I should have been straight out if the box lol

@@E-bikeguy yeah, I mean...a bit out of true I can see...but that wasnt dished at all. I am the most amateur wheel builder and still would never pass that off to anyone...even on a bike I was giving away for free. I used to know a bike builder at Canadian Tire here...and let's just say he didnt know anything about bikes and hired junkies as builders. I have purchased department store bikes that didnt even make it out of the parking lot lol

@@E-bikeguy you should never have to pay someone to make your brand new bike rideable...capitalism sucks.

🤣🤣🤣 that's right bro grandma speed

It's a Walmart bike so at 20 mph it's a gamble with your life

Wow, much appreciated for that information 👏

Oh ok yes I head the lifepi4 is safer

😂😂😂😂 yes I believe that is it the making

Oh yeah we went on some trails, and he was ready. Want me to modify it for more power lol

@@E-bikeguy 😆...so the 500w can get higher speed than its original design?

I agree especially for hi power use

Lol I definitely understand that for sure 😅

Yes I did my bike like that as well because I didn't want nothing to fall apart on me

@@E-bikeguy I went with a girlfriend when she bought her son a bike and the crank fell off on the way out the parking lot...the whole bottom bracket wasnt installed properly, only on one side, and fell out lol. The bike also had a lose headset, wheels all wonked and brakes rubbing lol. CCM from Canadian tire. Was over $300, too.

@@AaronHendu 😳😳😳😳😳

I'm using a domino throttle I highly recommend them, and the surron throttle as well

@@E-bikeguy I just found those, and they make a dual hall sensor one already, and it's reasonably priced. Definitely better than the junk I've been looking at before. Thanks E-bikeguy!

I'm curious, too, whether he's using standard 165 mm 168 or 170-75 on the cranks

Lol yes when I do reviews I will peddle without motor to see how hard it is for us tall guys lol

I’m 6’5 so I always wonder this too, I always had issues riding bikes lmao

Not that bike ,well because the owner never had that issue

Lol ok I need to look at that!!!

someone please let me know

It a 170mm dropouts

@@E-bikeguywill it fit a 190mm wheel?

i absolutely love your channel by the way been watching for some time now

@Bigpeeplit well I definitely appreciate it for sure 💯 I got more videos on the way and hope to continue to keep growing

I will soon💯💯

84v like full charge or nominal you can swap out a higher voltage controller but battery will need to be higher voltage as well

@@E-bikeguy 84v nominal is what I want

@@E-bikeguy I will use a 84v battery with it

It depends on what kind of tires you get

Lol 💯 I know it's definitely looks familiar 😅

@@E-bikeguy Okay it's only a 500W, so 20mph is about right.

Lol well I'm not going to put the on mine 🤣

It on the Walmart website

@@E-bikeguy i don't have walmart in my country, but i will search for this, thx tho

Oh sorry about that

Ok thank you I'll do a follow-up

I definitely agree 👍 especially a dog get behind you

@@E-bikeguy 😂 😂 😂 😂 🐕‍🦺🦮🐕🐶

Agree 😂 🐕🦮🐕‍🦺

Oh yes I noticed it when I got off of it

I'll see if he has the instruction manual

Naw if it's a 500w it's gonna do 20 max. I have a 500w bike and you just can't get more than 20 out of them.

​@@E-bikeguysome of those 500s have good power, I would think 26mph unlocked, that's what my Speedrid does,it's similar.

@@bassw1758 25a controller is pretty good for a 500w hub motor , i think you’re right that thing should be able to do 25 at least. My Aventon SINCH with 500w hub and 21amp controller could do 26mph

@EBikeBuilder_ ok that will be nice for him

I agree I believe 28mph should be the norm

I definitely agree 👍