Phantom 85 [V3] - No Motorized Bike Engine Will Go Faster At This Price! 

dang man straight full throttle on a brand new engine.

I own a MB shop. These little bikes are so much fun. My oldest is a 66cc 80😂on a Schwinn Point Beach. 12 years old, bought the bike & kit at he same time. Rode it again today. 😎

Speed! Oh boy to be honest I'd be geared up going that fast. Knee and elbow pads just in case. I love my Evercross H5 but have to admit it does struggle on inclines and I often think I could use something like what you have a gas powered engine. Normal flat surface I get 27 mph and even that looks fast. 😄 Awesome job.

these are awesome motor kits have built 3 now and all great 50mph after breakin :)

Hey brother thanks for posting. I planning on making my own phantom cause it just seems like the right move. Definitely need all that power.

I got hydraulic rotor brakes for my new build jokester but they are still a line pull. The kit wasn’t expensive and it was really nice to have a basic easy setup that just bolts up to a stock set up and still have great clamping force. I read the other message we’re you mentioned you wanted to upgrade. I got purple too for my color since you want that color scheme too. Hit me up if you need a link and all.

My new imaycc 80cc engine stock out of the box I got up to 35 mph with a 44 tooth sprocket I'm still breaking it in I ran one tank of gas through it so far. But I like your build that frame is nice I want to get one of those and I like how you went with the purple skulls and other purple parts it looks awesome my dude...🤙👍

I so wish they'd make a full suspension Felt Faker type motorized bicycle frame that could run either 26 or 29in wheels. Even a cheap rear shock is way better than a hardtail. It'd take lot's of stress off both the frame & Rider. You could upgrade to better forks & rear shock that have true compression, damping & rebound function. Maybe also add mounting tabs on the frame for optional jack shaft kit. Full suspension Felt Faker with 203mm F&R disc brakes 👍

Awesome. I have a 80cc, BMX,old school frame. Wiss I could buy a bike like that. Wow sweet.

Im about to order mine right now. Thanks for putting me on to this!

Nice runs just like mine once it's heat soaked you can bring the rpm down by letting off the throttle for a few seconds then clutch it works well for me running stock as well 79kph has been my max speed. My homebuild shouldn't go that fast but it's fun.

These little engines are so cute. I’m going to put one on my bike.

I have a 212 predator 6.5 horse motor on a modified mountain bike only modified for the wheels though the motor fit right inside the frame I do about 44 + miles an hour and it goes uphill like any other bike that has that torque to go up I have a torque converter on my bike and I get many miles out of my belts motors very reliable

I still running gen 2 ⚙️ still running good

Another great video. Thanks for Sharing bro Finally got nice weather up here so I got my bike back out finally so I can start making videos again

Nice clean build, keep up the great videos! Bikes by Bill.

I'm buying one really soon that was sweet be great to ride back and forth fishing it would cost next to nothing for for gas

Holy smokes you definitely need to upgrade the Brakes eventually.

You went so fast the front tire looked glitchy 😆. U almost traveled back in time.

You never mentioned what size sprocket you chose ... Thats really important in regards to the top speed ...36 tooth 44 tooth or 48 tooth ???

Got my bullet train electric start completely rebuilt with a billit machined liquid cooled head forged pistons crank and Conrod were already pretty strong double spark plug ports 2 stroke EFI & a smart carb water pumps are electric too so no power lose as if it were a crank driven pump & alternator already uses crank power amazon exhaust with expansion chamber and a welder shop did all the measurements for chains and gears to gear the engine to the crank peddles cut the peddles and cranks off so its balanced & just a gear welded a stationed gear from the engine to the crank and was able to use a regular bike chain from there with a mountain bike 6 or 7 speed transmission ran on ethanol with 2 stroke oil never could dyno it but it blew up the CVT clutch after a burnout drove it but was scared to reach top speed but id say i hit probably almost 90 mph 6 gear and was 70% throttle at like 6,800 rpm running at like 190 degrees after a warmup id say maybe making like 15/20 hp had a cheap engine temperature tack and rpm reader you can get for like $15 or less on Amazon its pretty accurate just gotta wrap a wire around a spark plug and go into the settings and set it for 2 stroke engine

"No Motorized Bike Engine Will Go Faster At This Price" hold my Dremel.

Looks awesome brother I have version 2 but I did some of my own stuff on the inside like you I swapped it for stihl products on the inside and it working ok for right now ride safe brother I'll be watching for your test ride

Nice content my guy!

Good lookin bike

Nothing gives you more Dopamine than riding a slow bike fast as helllllllll

Mine will be in tomorrow

People put predator 212s on bikes and the normal one makes double the power than the phantom, the kart racing version could probably push even more. The engines are also cheaper.

Nice vid bud! She's nice...and stock.😳...I mite just have to put my china doll on the shelf this summer.

good stuff keep it up bro

The one I got, the clutch plate flat nut , wasn't even screwed on buy 1/2 thread, clutch wasn't catching

Fantastic project!!!

Awesome vid

Great for tension relief, after day of working!, great hobby if ya love tinkering

Nice run

Question for you What oil ratio are you using mine v2 is still 20:1 can I go less temperature only gets up to 235 degrees?

What ratio do they recommend for break in? I heard 20 to 1 but that's a lot of oil

What should my mix ratio be for the phantom? For brak in?

nice build

How much do you weigh? My Phantom only reaches 40 mph with a 36t sprocket. I want more

Excellent..

how are these motors for mountain trail riding? can they handle steep hills etc?

Really need to change the title of this video since we got the avenger85

Chain clip should be going towards the motor

I've been through 2 now. Not sure what I'm doing wrong but I use the best oil and on the first the piston melted to the wall in 7 minutes. I love the power but haven't had any luck with them

You haven't broken it in yet!!!!

How is Phantom eighty five running❤

Ive had a ebay kit bolted to a cruiser and got 36 out the box with air box off and exhaust debaffled...80cc

One day, i will make one that goes fast as well

What is the difference between V1, V2 and V3 kits?

I bought one of these and I am regretting it big time having a very hard time with those damn piston clips

My angel fire 66/80cc from BBR hits 60

a firestorm will get you 40-45 stock out the box.

wow that's amazing. i was hesitant to buy a v1 or v2 phantom in the past hmm so i did'nt, but now i will soon buy v3. do you have an online link to the manual booklet @1:25 ?

Hi there , love your videos, looking for some advice, I am hoping to bring a bike and motor on a flight Newark to Havana Cuba , I live there during the winter but have no transportation. Could you recommend a bike and engine combination that would be reliable, need good suspension as the roads are non existent. I have basic tools in my house but I could buy in the states what I need , would you recommend 2 of 4 stroke , I don’t need to go fast because the roads don’t permit it but I need reliable machine as my wife might also need to use it and I don’t want it breaking down all the time . Best regards John .

This is the one

Hopefully they keep em in stock.

I had this type of bike. But had work done to the motor. And mine went 60 mph

Phantom 85 v3 with different carb and boost bottle? How fast will it go and what parts you prefer to use?

@MJTECH i have a question please someone help me i bought 2 stroke oil does this phantom 85 need oil or just marine greese? mine came in yesterday

Awesome

does it still have torque with the 36t sprocket to go up steap hills??

Yhi my name is joey I love it like that bike alot just wondering if you got one for sale I buy it

Kindly question can we remove the paddle part and change to normal steel pipe to make leg balance like normal motorcycle and we change the start button to make the engine work without paddle

8:54 - is this front swivel bracket which you can see here is it from the delivery kit or is it homemade?

Someone make a nice expansion chamber exhaust for this !!!

He also got the largest sprocket so he still went slower

Is it reliable for long daily rides?

How were the stock rims were they decent ? What gauge spoke were they?

I want to get one for work, but I am sure that the cops would pull me over; It is so loud.

sweet but scary ! 23mph on my ebike is fast enough for me ! but it's an awesome bike ! have you got pulled over by a cop yet ?

Can it be made silent, improved, especially its loud transmission??

How much did you say the entire kit cost?

8:54 - этот передний поворотный кронштейн, который тут видно, он из комплекта поставки, или он самодельный?

What's the fastest engine kit I can get for my cruiser deuce bicycle? I need it for work!!!

how well does the Engine break work does it slow you down?

By far the best motor on the market for 300 bucks

40mph??? Take my money!

Must save !

What was the name of the bike frame? You put the engine on.

if you could reply that would be great How fast were to able to after break in and how far were you able to go on one tank thinking about getting an 80-100+cc bike to get to the next town for school it’s about 8mi there.(i can leave gas at a friends house so getting back won’t be an issue) (with 6 miles on a county road) don’t want to pay car insurance get a car because it will prob cost me more

Hi may ask ask if you are using stainless rims or aluminum rims?

How's your quiet suburbia now brrrtrrrrrrtttrrttttt

Do they make a quiet muffler for gas motor bicycles

Where did you get the vented gas cap from?

What kind of gas are you supposed to use for this bike?

*7:26** - what a part is that in this view point?*

WHAT IS GAS MILEAGE USING “”THAT GAS TANK””? IS THAT GAS TANK SAME CAPACITY AS OTHER KIT’S TANKS?

isnt the wrist pin supposed to have a needle bearing?

Bike Berry is fucking great!

How is a Phantom 85 running?

I want instead of motor gasoline engine, change to e-motor and how much it cost?

Majy And Jay

This is as fast as a Wired Freedom full suspension fat tire E bike.. Just much noisier.. I think I would go for a quiet muffler..The E Bikes are pretty much legal ... Not sure about 85cc gas motor bikes.

Like the bike can I buy off of you

Top essa motorizada

How do I get it fully assembled?

That's annoying me that we can't get them without having to pay 200€ for shipping in europe

What kind of bike is that!

Ok great! But you needed to provide the most important link: “The Bike Frame”. Just a John Doe name doesn’t help. Thank you.