Pinball Art Blade Installation

Подписаться 1,1 тыс.

Просмотров 3,5 тыс.

50% 1

Watch as I walk you through the installation of pinball art blades - an inexpensive and worthwhile upgrade to your pinball machine! If you have two people, another method is to remove the playfield which gives you easy access to the cabinet side walls. This method shown however is easily doable with just a single person, but care must be taken when the playfield is in the raised position to keep it upright.
Chapters:
00:00 Introduction
02:14 Moving the raised playfield side to side, demonstration
03:03 Moving the raised playfield backwards, demonstration
04:32 Taping the art blades in place
10:25 Sliding the playfield back and fixing it in place
11:38 Removing the backing paper, front half
18:05 Sliding the playfield forward and removing the backing paper, back half
21:15 Reveal and conclusion

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@Mo_Ketchups 6 месяцев назад

You didn’t HAVE to make this video … but you DID … for slobs like ME who just bought the character montage blades for my TSPP machine! What a selfless and laudable contribution to the community. 🤟👏👏👏👏

@GearheadDaily 4 месяца назад

Thanks for the pinball videos! Keep at it :)

@abpinball 4 месяца назад

Glad you like them - thanks for watching!

@CurtMillerMagician 6 месяцев назад

Thanks for this! You made the process a breeze!

@abpinball 6 месяцев назад

Glad it helped!! 👍

@lamontcranston1003 7 месяцев назад

Looks great. Thanks for the video.

@ray.a7343 Год назад

They should all come with the pin .u should not have to buy and install art yourself for the money we pay for a new pro pin ! its getting ridiculous

@abpinball Год назад

Well, considering pinball machines of the past (including the 90’s era Williams games) never had side art like this, personally I do consider it an upgrade and not something I necessarily expect on the machine, and they aren’t terribly expensive too. If we’re critiquing upgrade prices, I’d much sooner point the finger at $1700 toppers personally! 💩 Anyway thanks for watching!

@moobutt Год назад

@@abpinball- well that’s just one guys opinion. I 100% agree that if I’m paying $7-8000+ for a pinball machine it should come with these. And Stern can suck it for not putting expression lights in everything 😂

@rehoby 11 месяцев назад

They will install them for another $6k if you get an LE! 😂 I agree... Should be standard

@giveupnever7458 Год назад

It's obvious that the hole needs to be aligned with the nut.. I can't flatter you for posting this

@abpinball Год назад

It was off way more than I realized while filming, for sure. That said, they come off pretty easily and can be repositioned. It’s not off enough to be noticeable when playing though, so I haven’t bothered.