Тёмный

Pioneer SZ CASE BUILD Part 2 | DBX Drive Rack PA 2 | XLR and PowerCon ports 

DJ Rick Web
Подписаться 65 тыс.
Просмотров 73 тыс.
50% 1

LIKE COMMENT AND SUBSCRIBE!!
Everything used in build:
-dbx drive rack pa 2 amzn.to/2sVy4Rh
-netgear wifi router amzn.to/2sVQX6B
-Velcro amzn.to/2uf3cin
-GLS Audio 2ft xlrs amzn.to/2uoLeKN
-GLS Audio 6ft xlrs amzn.to/2ukgSZ7
-GLS Female ends amzn.to/2tkeWLS
-1/4" right angle 1.5ft cable amzn.to/2tk46FY
-Electrical tape amzn.to/2tkrEdF
-Neutrik flush mount amzn.to/2tkEl8e
-GLS male xlr flush mounts amzn.to/2uf8mLp
-solder amzn.to/2vieaR8
-solder iron amzn.to/2uoAxbi
-heat shrink amzn.to/2sVdjVH
SOCIAL MEDIA
------------------------------------------------------------------------------------------
Twitter: @DJRickWeb
SnapChat: rickyweber65
Instagram: rickyweber65
Facebook: / djrickweb
Mixcloud: www.mixcloud.com/ricky-weber/
-----------------------------------SPONSORS----------------------------------
Music Nation Records: bit.ly/2lXtbXz
Producers and Creators Email:
musicnationrecords100@gmail.com
------------------------------------------------------------------------------------------
DJ ASSOCIATES (Who I work for):
bit.ly/2jxiitI
------------------------------------------------------------------------------------------
EQUIPMENT I OWN
SPEAKERS
-JBL PRX 712 amzn.to/2jvkQcr
-JBL PRX 715 XLF amzn.to/2jv9Hsc
-JBL PRX 618 XLF (Good luck finding them)
-JBL EON 615 amzn.to/2izQCVW
STANDS
-Odyssey LT-P2 Tbars amzn.to/2jvpNCd
-OneStage Stands amzn.to/2iGhBKO
-Mic Stand amzn.to/2izSKwR
-Laptop Stand amzn.to/2mOviJM
AUDIO STUFF
-Pioneer DDJ SZ amzn.to/2myaTcf
-American Audio VMS 4.1amzn.to/2jx8W18
-GTD Audio G-733H Wireless Mics amzn.to/2izMKV5
-Audio-Technica ATR-1300 Mic amzn.to/2izOGgl
-Vmoda Crossfade Headphones amzn.to/2lcyYEj
-Beats Mixr Headphones amzn.to/2jvfjm4
LIGHTING
-Chauvet Xpress 512 amzn.to/2jXKfYM
-Donner Wireless DMX amzn.to/2iNZZzH
-ADJ Inno Spot Pro amzn.to/2jxwK5g
-ADJ Mega Tri Par Plus amzn.to/2jXwb1p
-ADJ Mega Par Profile amzn.to/2jXKTFL
-ProDJLighting MHH5 wash moving heads
VIDEO GEAR
-Cannon G7x amzn.to/2iNVN3a
-GoPro Hero Plus amzn.to/2iO0RER
-DJI Phantom 3 amzn.to/2iGFlOJ
-Joby GorillaPod amzn.to/2jvlbM6

Развлечения

Опубликовано:

 

12 июл 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 277   
@Evansweeney
@Evansweeney 6 лет назад
Have to say i love all your videos and content but.. This video i think has to be one of the best besides some of your Gig Log's, Keep up the good work Now i have to do my case like that awesome Tips, love the idea of having the ports on the back of the case great idea!!
@DJRickWeb
@DJRickWeb 6 лет назад
+Sweeney Music thank you and yeah could take it a step further and add mic ports as well.
@Evansweeney
@Evansweeney 6 лет назад
That would be another great idea! Possibly even add some kind of DMX system in your case For your lights !?
@DJRickWeb
@DJRickWeb 6 лет назад
+Sweeney Music yep. If I had space and always used my show express with my case I would have put it in. They sell usb ports you could install as well.
@Evansweeney
@Evansweeney 6 лет назад
Yeah Should look into those usb ports for your case, I no what im going to order right now.
@BigBlockEntertainment
@BigBlockEntertainment 6 лет назад
Great video man! Hopefully going to do this soon to my DDK SX2 case! Always appreciate your videos man!
@steadymanos
@steadymanos 5 лет назад
I give u props on this.. you're a mad scientist..
@justwatchingyoutube3285
@justwatchingyoutube3285 6 лет назад
Great Job, Nice Build....Congratulations on the almost 5k
@djb4ey
@djb4ey 6 лет назад
great video man. very detailed. can't wait to see the next gig log with all the new equipment.
@truthrevealed9293
@truthrevealed9293 5 лет назад
very proud of you young man absolutely great job!!!!
@DeeJayLQ
@DeeJayLQ 6 лет назад
Awesome build 👍🏽 thanks for sharing it give me some inspiration on what to do with my rig.
@DjJayBook
@DjJayBook 6 лет назад
Web!!!!!! I have been waiting on this vid for a hot min cause I have a similar case for my Sx2 and you have gone above and beyond Sir! The case setup is dope and I know you can't wait to showcase it!! Great Vid!! Didn't even feel like it was 30 min!!
@DJRickWeb
@DJRickWeb 6 лет назад
+Dj Jay Book good to hear the video keeps attention. That was ny fear making it this long
@eddysaintil
@eddysaintil 6 лет назад
Love the videos man always entertaining me and teaching me new things
@MelissaTimea99
@MelissaTimea99 6 лет назад
"Moving on to cable 2, right Todd?" "I fricken hate you" lmao
@DJRickWeb
@DJRickWeb 6 лет назад
+Tim Harjo roomates are the best
@biggz612
@biggz612 4 года назад
rick your the man great vids extremely useful and informative please keep the vids coming
@djprodgy7379
@djprodgy7379 6 лет назад
Whats good Rick. Really appreciate the help. Salute
@djdonrack5592
@djdonrack5592 4 года назад
Excelente propuesta, y lo mejor de todo es que reduces los tiempos de la instalación del equipo en los eventos. Muchas felicidades. Salu2 desde Toluca, México.
@ItsTommiii
@ItsTommiii 6 лет назад
Yo this inspired me to do something very similar with my case for my DDJ RB and if I upgrade in the future my RR Will also have this case modification. Love your vids and DJ Barr's vids.
@djheavyb6316
@djheavyb6316 5 лет назад
Great build and video mate!
@yafavhomiejr
@yafavhomiejr 6 лет назад
Excellent video homie! This is great stuff.
@DJRickWeb
@DJRickWeb 6 лет назад
+YFHTV thanks man.
@ewartdejonge104
@ewartdejonge104 6 лет назад
i really appreciate this video, because I wanted to do one for myself a while now
@DJRickWeb
@DJRickWeb 6 лет назад
+Ewart De Jonge good luck send me pics of the finished product
@drtraker
@drtraker 6 лет назад
Great build bro! very very detailed.. I found out after i did mine that they sell those xlr cables already soldered to the neutrik connector nowadays.
@DJRickWeb
@DJRickWeb 6 лет назад
+Supreme Team yeah I saw them as well. Figured I save a little and make it more exact for my case
@newyorksteelo
@newyorksteelo 4 года назад
Detailed instructions. Thumbs up :)
@gregoryd3651
@gregoryd3651 5 лет назад
Great Build!!!
@monarchthedj8357
@monarchthedj8357 5 лет назад
Thank you very much for this!
@goham26101
@goham26101 6 лет назад
looks dope man
@enjapunye
@enjapunye 5 лет назад
THUMBS UP from me Rick..👍🏻 i'm your latest SUBSCRIBERS..🇸🇬
@DayNNyteDJs
@DayNNyteDJs 6 лет назад
Great video as always Rick. For any of your viewers that don't want to solder (or can't), they can get custom cables from NLFX Pro and save themselves a lot of work. For a few bucks more, have it done professionally.
@DJRickWeb
@DJRickWeb 6 лет назад
+DayNNyteDJs good info to pass along!
@RadINation
@RadINation 5 лет назад
Wanting to do something similar to my case as well. Seismic Audio sells those audio jack in like a "patch" version no soldering needed. Just plug in xlr and go. My question is are there any sound difference between that stay and traditional sodering?
@DJRickWeb
@DJRickWeb 5 лет назад
Not much
@carterg3339
@carterg3339 4 года назад
I use neutrik connectors and kester rosin core solder best solder made
@curt356
@curt356 6 лет назад
Great job bro.💯
@DJRickWeb
@DJRickWeb 6 лет назад
+DJ PARADISE thanks
@djprodgy7379
@djprodgy7379 6 лет назад
Great video. I need to send you my case.
@DJRickWeb
@DJRickWeb 6 лет назад
+DJ PROD!GY lol I should start a new business.
@mugenmario537
@mugenmario537 6 лет назад
good detail
@djalfaro89
@djalfaro89 4 года назад
Very useful thanks
@bradstoll1991
@bradstoll1991 6 лет назад
This I awesome dude
@djnvision
@djnvision 6 лет назад
1. It's a powercon cable 2. It's a "noytrick" connector 3. JBL Srx
@DJRickWeb
@DJRickWeb 6 лет назад
+Renigadecrew neutrik is the manufactor of the power con connector. And there one of the top manufactors of power con
@djnvision
@djnvision 6 лет назад
DJ Rick Web yea ik just was saying that neutrik makes more than just powercon lol.
@DJRickWeb
@DJRickWeb 6 лет назад
+Renigadecrew good point and correct on 3.
@spiner111333
@spiner111333 6 лет назад
Rick 4 things 1) Audio Cable Tester $30-$50 2) Heat Gun $10-$15 strip your wires back just a little farther and use small heat shrink tubing on each wire then the big tube. 3) A electronic work vice $35-$50 4) flux POWER CON Cable.... Great Video
@DJRickWeb
@DJRickWeb 6 лет назад
+Jimmy Spin 1 ans 3 didnt want to pay. 2 left my heat gun at my house in ohio. And 4 yeah flux would have helped a ton. And lastly yeah I got caught up in the brand
@djkingjeff5958
@djkingjeff5958 6 лет назад
very nice
@djdrewthomas
@djdrewthomas 6 лет назад
Nice! Thinking about doing this to my SX2 Gator case. The only bad thing is it makes the case heavier. 😳 lol
@djdrewthomas
@djdrewthomas 6 лет назад
Ps... The captions are funny 😂 "voice to text" = "no speaky English" 😜😂
@abo7uson
@abo7uson 5 лет назад
i got same case..did u ever do it?
@chaneknighton5922
@chaneknighton5922 6 лет назад
I was wondering what's the dbx for I was seeing if it's something I should buy I wasn't sure it is for pa speakers or something else
@jonathonlesko3554
@jonathonlesko3554 6 лет назад
I would fit a tiny fan for inside of the case to be safe with outside gigs
@DJRickWeb
@DJRickWeb 6 лет назад
+jonathon lesko very good point and actually I discovered the dbx rack actually produces quite a bit of heat
@georgetyronejr.2925
@georgetyronejr.2925 3 года назад
He should have just got amp rack for your Dbx drive rack and your Microphone receiver!
@DJRickWeb
@DJRickWeb 3 года назад
See what I have now that I have transportation space
@MadInsanity
@MadInsanity 5 лет назад
I would highly recommend a power conditioner. My other guy has the golden SZ2 and was running some JBLs without one and one of the JBLs died from dirty power in the middle of a wedding.
@DJRickWeb
@DJRickWeb 5 лет назад
All power prior to running into the case goes through a power conditioner. That way I can run more than just my sz internals off a $200 conditioner.
@MadInsanity
@MadInsanity 5 лет назад
DJ Rick Web gotcha
@rorywarner9527
@rorywarner9527 4 года назад
what size is the spade bit you used for drilling the holes for the connectors?
@DjGCue71
@DjGCue71 5 лет назад
Hey Rick, besides that rack for your sound system...what do you recommend I use? I have a pair of RCF EVOX 12’
@DJRickWeb
@DJRickWeb 5 лет назад
You dont need to use anything. What I have is just over kill.
@MrKMilano
@MrKMilano 6 лет назад
Love your channel. Just a suggestion, add the dust cover for the female xlr inputs on your case. It adds protection. Also, where us the video on the power con build?
@DJRickWeb
@DJRickWeb 6 лет назад
I put in the power con in this video
@MrKMilano
@MrKMilano 6 лет назад
DJ Rick Web my apologize, I over looked it.
@atulramdin8216
@atulramdin8216 5 лет назад
Hi I am a big fan
@ryanconvery795
@ryanconvery795 5 лет назад
can I put the powercon 2 inches away from the XLR cables? or do I HAVE to put it on the other side?
@RedDawg246
@RedDawg246 Год назад
Hope you come back to do the full reveal or a new build.
@DJRickWeb
@DJRickWeb Год назад
Featured in the gig logs. But also new build with a 1000 srt
@CheezyBurg3r
@CheezyBurg3r 3 года назад
Hey Rick, Nice video by the way, After you modify your flight case for the Neutrik flush mount and the power cord, Do you plug this direct to the wall outlet or do you plug this to Surge Protector? I am adding a Furman Power Rack conditioner instead of the DBR Rack PA2.. Thank you in advance sir.
@DJRickWeb
@DJRickWeb 3 года назад
Normally into a Furman power strip first
@soundzentertainmentnz
@soundzentertainmentnz 4 года назад
Hey Rick Kia ora from New Zealand Im about to set a similar system up but I use the DDJ1000 and I have the DBX drive rack2, question I run either just my two JBL 15's or them coupled with 2 X 18' Subs so I understand the need for the Highs and Lows, what would I use the mid range on the DBX drive rack for? thanks Zane
@DJRickWeb
@DJRickWeb 4 года назад
Please watch my video on how to setup the driverack pa 2
@joshmitchell9920
@joshmitchell9920 6 лет назад
What terminals did you buy? I see they say 16/14. I got some of those at Home Depot but they do not fit all of the connections on the powecon inlet.
@DJRickWeb
@DJRickWeb 6 лет назад
I bought the plug and took it to Lowe's and got the right size terminals.
@jayuce2193
@jayuce2193 6 лет назад
nice bro
@djdannybhtx
@djdannybhtx 6 лет назад
Hey Rick great video! How did the top of the case fit with the SZ being raised a bit?
@DJRickWeb
@DJRickWeb 6 лет назад
+Daniel Salas fit great all I had to do was cut the foam that goes in the top down a bit to match the raise.
@djdannybhtx
@djdannybhtx 6 лет назад
DJ Rick Web perfect thanks for the response! Looks great!
@maxwank4209
@maxwank4209 4 года назад
On my sx3 case I only have an inch high of wood to drill through-is this enough for the xlr mounts because I know that they are a little bigger than 7/8... hoping for a perfect fit-I have an odyusa case
@DJRickWeb
@DJRickWeb 4 года назад
Yeah you might have to turn the ports sideways to be able to screws in but should be fine
@maxwank4209
@maxwank4209 4 года назад
Thanks!
@robertdaniels10
@robertdaniels10 8 месяцев назад
Hey thanks for the cool video you reordered for us i am about to do same upgrades on my odyssey case for my DDJ 1000 SRT i have a question about the router wifi your using i have a QSC Touchmix8 and i am using my Ipod Air to do my settings i have not used it on any gigs yet so i am at home and my TouchMix8 mixer is connected to my Home WIFI i am not sure if i need the router you have is what i need when i go to gigs i can set up my QSC TouchMix8 with my Ipad Air is this the case your using the router ? can you explain thank you in advanced
@DJRickWeb
@DJRickWeb 8 месяцев назад
Yes you need a router when at gigs like the small one i put in my case. This will not have internet but it will allow the qsc to talk with the ipad over wifi.
@robertdaniels10
@robertdaniels10 8 месяцев назад
@@DJRickWeb thank you for the information
@ArijitChowdhury80
@ArijitChowdhury80 6 лет назад
Rick, for a 2 speaker setup how would you connect the drive rack? Or for a 2 speaker 1 sub setup and 2 speaker 2 subs setup? Where are you connecting your tops and subs? I have a small setup with just 2 EV ZLXs for smaller gigs that I'd like to connect. And for bigger gigs there are sound guys most of the time and they take care of audio balancing and all from their mixer, but I'd like to get a drive rack to get self-sufficint and have the ability to connect more than 2 speakers with my system itself.
@DJRickWeb
@DJRickWeb 6 лет назад
+Arijit Chowdhury so you would set up multiple saved set ups on the deive rack one for each of the combinations you said. You would use the 2 high out puts for both tops. And then for subs either use 1 low out for 1 sub or both for 2. The out puts can be configured to bw mono or stereo for the 2 highs and the 2 low.
@ArijitChowdhury80
@ArijitChowdhury80 6 лет назад
Ok got it Rick, and thank you very much for replying. So the mid frequencies (although we are not using the mid) will go through the 2 Highs and low frequencies will go through the Lows? The EV speakers have a on-board DSP and there I can configure the crossover. So if I configure in the speaker that anything less than 100KHz will go to sub and then when I'm using the DBS unit Lows to connect sub and Highs to connect top, it should ideally work? Am I understanding you correctly?
@DJRickWeb
@DJRickWeb 6 лет назад
+Arijit Chowdhury with the drive rack I would just set the ev dsp to full range. You can configure all the crossover points in the dbx rack. The rack lets you run all the outputs (2 highs 2 mids and 2 lows) at any high or low cross over points. Just because the outputs are labeled as high mid and low does not mean thats what frequencies come through rhose outputs. You make all the outputs do what ever you want
@DJDynablend
@DJDynablend 6 лет назад
Kicking Ass Man! Great video! Im looking at ways to EQ my output sound also now as No one wants to hear flat sounding music.
@ArijitChowdhury80
@ArijitChowdhury80 6 лет назад
On mobile gigs when people make requests and DJs play one-off requests from phone (I do that quite often), then are you connecting the phone to one of the channel on the mixer or connecting it to the drive rack?
@DJRickWeb
@DJRickWeb 6 лет назад
+Arijit Chowdhury mixer. Drive rack is the middle ground between the mixer and the speakers
@ArijitChowdhury80
@ArijitChowdhury80 6 лет назад
Yes, indeed. So I'm going to have one of the mixer channel dedicated for the phone. That makes sense and that is what I do now anyway. Thanks again for answering :)
@vinny_mj94
@vinny_mj94 6 лет назад
jbl srx series
@DjNavSydney
@DjNavSydney 6 лет назад
Great video mate.. how heavy is the case now..?
@DJRickWeb
@DJRickWeb 6 лет назад
heavy I would say about 60 lb. Thankful it has wheels
@DJRickWeb
@DJRickWeb 6 лет назад
I added dust caps to the xlr ports as well. You will see them in the first episode of mail time airing soon!
@DJ-Coma
@DJ-Coma 4 года назад
DJ Rick Web besides dust caps, do you have to be careful transporting your the case so the connectors don’t get busted? They seem to stick out a bit. Thanks for the video though, very informative!
@DJRickWeb
@DJRickWeb 4 года назад
Not really. The solid ball corners stick out further then the ports
@djcazzper674
@djcazzper674 6 лет назад
Thanks! Lots of info. I didn't know anything about that dbx. I think it will be my next purchase. Thanks WEB!!!
@DJRickWeb
@DJRickWeb 6 лет назад
+Dj Cazzper welcome
@denzilross3075
@denzilross3075 6 лет назад
Nice video Web, I was thinking about getting a drive rack but my setup is small 2 eon 618 with 1 prx718.Do you think it's worth it?
@DJRickWeb
@DJRickWeb 6 лет назад
+Denzil Ross the amount of parameters you can adjust is unparallel to just stock speakers. But maybe a gorack is more something you could use now
@denzilross3075
@denzilross3075 6 лет назад
DJ Rick Web thanks man I'll check it out & keep them videos coming👍👍👍👍👍
@tnyce1930
@tnyce1930 5 лет назад
Clutch set up brother! How are you liking the sz2? I currently using the sx2 and ready for an upgrade thinking of the sz2..
@DJRickWeb
@DJRickWeb 5 лет назад
It's just an sz not an sz2, but its great
@dennisnbrown
@dennisnbrown 5 лет назад
Rick why not an IEC connection for power so you can use any length cable you need from your existing selection
@goham26101
@goham26101 6 лет назад
show us how you scratch your mixes on it.. that be dope
@djlys8150
@djlys8150 5 лет назад
what made you go with a Neutrik plug over the standard IEC plug?
@DJRickWeb
@DJRickWeb 5 лет назад
Locks.
@djayala16
@djayala16 4 года назад
I fd up my flight case man 🥺 I put in a 2” hole to install a an ac to ac. Only because I didn’t know you could make your own powercon cable I seen they were 60$ for a 25ft.. now I have a 2 inch whole in the back of my flight case and am wanting neutrik powercon. Anyone know a solution
@chaneknighton5922
@chaneknighton5922 6 лет назад
I wasn't sure that the dbx is for is I should purchase it or not
@OfficialDJWolve
@OfficialDJWolve 6 лет назад
Hey DJ Rick Web, awsome video, this will really help me in the future. Quick question what song you playing at 13:54, many thx 😉
@DJRickWeb
@DJRickWeb 6 лет назад
Check description songs are listed there
@OfficialDJWolve
@OfficialDJWolve 6 лет назад
DJ Rick Web sorry I can't find it, do u have the name?
@DJRickWeb
@DJRickWeb 6 лет назад
I am not sure what song that was. Too long ago
@OfficialDJWolve
@OfficialDJWolve 6 лет назад
DJ Rick Web that's alright thanks anyways, I'll just ask Google
@DJFLEXOH
@DJFLEXOH 4 года назад
How much would you charge to send over those xlr and power cord completed so that way all i have to do is drill them to the box ?
@DJRickWeb
@DJRickWeb 4 года назад
Hit up NLFX pro they have them for sale on there we site
@krbuilders4685
@krbuilders4685 4 года назад
Ricky how do you use the wireless router for your dbx drive rack
@DJRickWeb
@DJRickWeb 4 года назад
Just plug into the drive rack and connect to that router.
@djprodgy7379
@djprodgy7379 6 лет назад
Got a quick question. I have the neutrick powercon cable to power my case. How much would you charge me to make one of the powercon connection with the surge protector on it.
@DJRickWeb
@DJRickWeb 6 лет назад
+DJ PROD!GY send me a message on social media please.
@djprodgy7379
@djprodgy7379 6 лет назад
whats your email. I'll send all the details that why. Not a huge fan of social media
@DJRickWeb
@DJRickWeb 6 лет назад
+DJ PROD!GY rickyweber65@gmail.com
@nydjrio
@nydjrio 2 года назад
Flux for the soldering!
@ashb3344
@ashb3344 Год назад
I’m not going to cut up a decent cable and potentially mess it up 😆. Can these be purchased pre made anywhere . Obviously I’m in the uk so would have to look a bit closer to home 😅
@DJRickWeb
@DJRickWeb Год назад
Nlfx pro makes them!
@ashb3344
@ashb3344 Год назад
@@DJRickWeb thanks :)
@ArijitChowdhury80
@ArijitChowdhury80 6 лет назад
What are the dimensions of your case? I am looking to build a similar one myself too, with similar goodies like you have but my mixer and player combo makes a dimension of 46 inches wide, 15 inches deep and 6 inches tall. The Denon Prime series, which I want to get eventually (use Traktor S8 at the moment). So want to have a case ready first before investing in the gear.
@DJRickWeb
@DJRickWeb 6 лет назад
+Arijit Chowdhury I would look up the demensions of the componets to out in your case and measure out the inside of your case it be more accurate
@DjGCue71
@DjGCue71 3 года назад
That is pretty cool man but I feel that is a bit over kill with the DBX Rack. Does it really make a difference on sound?
@DJRickWeb
@DJRickWeb 3 года назад
Just gives you ultimate control over your sound.
@blakewhiting1669
@blakewhiting1669 6 лет назад
srx812p or srx815p. I don't think you're a dj that would do the 835p. I would also look at the rcf art 745a if you're interested in 15" powered boxes. Nice choice with the Driverack PA2. quick correction, it's a powercon cable by neutrik (noytrick). I also wanted to ask about your backup system. what is your backup for your mixer? If it goes down, can you be back up and running in under a minute?
@DJRickWeb
@DJRickWeb 6 лет назад
+Blake Whiting I guess I need to make an update on this topic. I did a video on back up systems ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LKddSTYf1Bs.html but that was back with the vms 4.1. Everything is backed up in some way at all times and it would take max 1 minute to get music back up. In moat cases 10-30 seconds for the switch over.
@1973djmarc
@1973djmarc 6 лет назад
how heavy is it now since you put the stuff in it.
@DJRickWeb
@DJRickWeb 6 лет назад
+Marcus Franklin bout 70 lb
@halredmond5186
@halredmond5186 6 лет назад
Rick what do you use for feedback for microphones
@DJRickWeb
@DJRickWeb 6 лет назад
+Hal Redmond the driverack pa2
@BRAVE_dj
@BRAVE_dj 6 лет назад
you are doind an awesome job, you deserve all theses followers. my advice is that it can be a false good idea to have bare plugs outside the case like that. theses cases are not only there to protect from chocs, they are very important to protect from dirt, dust and humidity. I can't remind how often the roadcase ends in the snow (calcium) or in a wet or muddy area. It is very crucial with the DJ controller that goes out everytime you go out.
@djg5213
@djg5213 4 года назад
What was the 2ft xlr cables for? I didn't see you use them...
@DJRickWeb
@DJRickWeb 4 года назад
The angles? Weren't long enough
@maxencebollaert3078
@maxencebollaert3078 6 лет назад
can you give me the link for your case ? great video maybe new EV speakers..
@DJRickWeb
@DJRickWeb 6 лет назад
pro x case amzn.to/2tOM1TY and not ev
@maxencebollaert3078
@maxencebollaert3078 6 лет назад
thank you
@richardmoral8888
@richardmoral8888 5 лет назад
im here philippines,,, angeles
@djrod4205
@djrod4205 2 года назад
What foam spacers did you used?
@DJRickWeb
@DJRickWeb 2 года назад
Came with the prox case
@DJReminisce1
@DJReminisce1 4 года назад
Can you do a video on how you mounted the dbx in exactly please?
@DJRickWeb
@DJRickWeb 4 года назад
Velcro
@DJReminisce1
@DJReminisce1 4 года назад
Wow I’m surprised it’s held up so well. Thanks!
@DJReminisce1
@DJReminisce1 4 года назад
I just found the link for the 1u odyssey case uses to secure it firmly
@DJReminisce1
@DJReminisce1 4 года назад
www.odyssey-parts.com/product-category/rack-case-parts/rack-rails/
@Seattlemike009
@Seattlemike009 6 лет назад
you should do a video about drive rack
@DJRickWeb
@DJRickWeb 6 лет назад
+Michael Grinshtat I will be
@argenisrodriguez1610
@argenisrodriguez1610 6 лет назад
Good video! But...How the hell you conect your network?...i cant get any conection to my tablet even if i enter the ip addres manually on the dbx app... Thanks
@DJRickWeb
@DJRickWeb 6 лет назад
+Argenis Rodriguez not sure I understand the question. Did you connect your driverack to a wireless router via the ethernet port? Next question did you plug it into an auxiliary ethernet port on the router not the internet in ethernet port? Hope that helps
@vacneaussie575
@vacneaussie575 6 лет назад
Instead of using a flame on heat shrink.... try using a hair dryer, they put out enough heat to shrink it without risking melting it or any of the cable insulation behind the heat shrink
@DJRickWeb
@DJRickWeb 6 лет назад
+Vacne Aussie I left my heat gunn at my house in ohio. And didnt want to wait to finish the video
@joshuaculross1387
@joshuaculross1387 6 лет назад
If you ever need help with audio let me know. I am a live sound engineer
@gmtechguy
@gmtechguy 3 года назад
Does the sub harmonics mess with the mics?
@DJRickWeb
@DJRickWeb 3 года назад
No as mics normally fall well above 80 hz. Sub harmonics mess with low frequencies between 20 and 60 for the most part
@gmtechguy
@gmtechguy 3 года назад
DJ Rick Web thank you, the reason I ask is because I use the dbx gorack and when that is on my mics sound muffled and weird. The drive rack your using may fix this issue.
@theresaskelly3969
@theresaskelly3969 6 лет назад
Hi DJ Rick Web I accidentally stumble on your RU-vid channel after an exhaustive search on power speakers and DBX Driverack PA2. Presently I am using the Pioneer DDJ-RZX & DDJ-SZ2 controllers, (4)JBL PRX 715/ (4)PRX 718XLF speakers, Allen & Heath Zed 16FX, and BBE 882i maximizer. I've always wanted to upgrade to the DBX Driverack PA2 with my sound system but wasn't sure if it was a good idea. Do you have any suggestions? In the past, all I've used are passive speakers with Power Amps and processors. I await your response. Stay bless!
@DJRickWeb
@DJRickWeb 6 лет назад
+Theresa Skelly the drive rack pa 2 is amazing especially with the ipad / phone / laptop wireless control
@theresaskelly3969
@theresaskelly3969 6 лет назад
But what I am asking is whether I can use it on my setup? Because I noticed you do have the Pioneer controller and the DBX PA2. I researched the DBX PX, but this product has been discontinued. In other words, can the DBX PA2 work for me?
@DJRickWeb
@DJRickWeb 6 лет назад
+Theresa Skelly yes it will work for me.
@Erikgmz
@Erikgmz 5 лет назад
Nice video but next time make sure more light.
@dannyrash1387
@dannyrash1387 6 лет назад
Why not Gaff for wrapping cables? Electrical tape can cause gunk build up.
@DJRickWeb
@DJRickWeb 6 лет назад
Because it's electrical. And I used heat wrap mostly
@dannyrash1387
@dannyrash1387 6 лет назад
Ohh I understand now.
@earnest6
@earnest6 5 лет назад
Please explain why you need a wireless router
@DJRickWeb
@DJRickWeb 5 лет назад
The dbx driverack pa2. If you want to control wirelessly you need a router to connect the iPad to the driverack
@josep7831
@josep7831 Год назад
If you go to venue and theres no wifi how you going to get wifi to your router
@DJRickWeb
@DJRickWeb Год назад
Routers just create a network for devices to communicate. They never need the internet to function
@ethanmurphy925
@ethanmurphy925 6 лет назад
JBL SRX812p
@jevygenius
@jevygenius 4 года назад
What controller case is this that u just modified
@DJRickWeb
@DJRickWeb 4 года назад
I think its discontinued
@jevygenius
@jevygenius 4 года назад
Ok i got a new sz2 what case would you recommend. Drop 2 links below ..
@DJRickWeb
@DJRickWeb 4 года назад
@@jevygenius Prox cases are my favorite. Personally I like the non laptop shelf models.
@henniewagner
@henniewagner 6 лет назад
PRX 800W's?
@DJRickWeb
@DJRickWeb 6 лет назад
+Hennie Wagner nope
@DJRickWeb
@DJRickWeb 6 лет назад
+Teodor Zimta and tops
@richardmoral8888
@richardmoral8888 5 лет назад
hope you can hire me im interested to work of you,, thank you,,, god bless
@cdjr8744
@cdjr8744 4 года назад
Are you still using this case with the drive rack in it?
@DJRickWeb
@DJRickWeb 4 года назад
Absolutely. Ever event
@DJRickWeb
@DJRickWeb 4 года назад
This has been further moded since stage two but yes drive rack and sz combo
@jayuce2193
@jayuce2193 6 лет назад
how much did you buy all that in total
@DJRickWeb
@DJRickWeb 6 лет назад
Not sure. If your talking controller case and everything in it. Probably close to 3 grand
@josep7831
@josep7831 Год назад
Great video i like it but a video of almost 30 minutes that could of been cut into half the time
@DJRickWeb
@DJRickWeb Год назад
Details matter
@chrisgirardi2827
@chrisgirardi2827 4 года назад
Love these vids making this my Thanksgiving Project? Question what are you plugging your powered speakers into? A separate strip on the floor? I’m asking cause thinking about adding similar power outlets to the case for the speakers too.
@DJRickWeb
@DJRickWeb 4 года назад
I have a smaller 4u rack below the table with a power conditioner. Speakers and this case plug into that
@chrisgirardi2827
@chrisgirardi2827 4 года назад
Brilliant ok is this similar to the rack you have ? Or better yet if it’s not too annoying what rack do you have?
@DJRickWeb
@DJRickWeb 4 года назад
@@chrisgirardi2827 similar to which rack? It's just a basic 4u rack
@chrisgirardi2827
@chrisgirardi2827 4 года назад
Oh sorry meant to add amazon link to a gator one I saw but ok sounds good I’ll scope the deals. Thanks again
Далее
FINISHING the DJ Speaker System (Adding a Subwoofer)
20:57
Which bus driver am I?🚌
00:13
Просмотров 1,8 млн
MIRAVI - Ивы 31.05.2024
00:14
Просмотров 98 тыс.
Carbonara under PRESSURE @Lionfield
00:44
Просмотров 3,5 млн
Wedding DJ survival kit
12:13
Просмотров 52 тыс.
Why DJs Are Ditching Their Roadcase For DJ Furniture
8:05
Building your own DJ Controller case
28:26
Просмотров 92 тыс.
Crucial SSD Drive Failed - Can we save data.?
23:40
SOUND SYSTEM CHECK & CUSTOM XLR PLATE
18:41
Просмотров 79 тыс.