Making Road Case LIDS into TABLES - ULTIMATE DJ Rack Build Part 2 (How to Tutorial)

Подписаться 66 тыс.

Просмотров 53 тыс.

50% 1

Mobile DJ tutorial - In this video I finish my ultimate mobile DJ audio rack. Making the lids into table sides, right angle XLRs, totes, labeling, and power strip!
April 20th, 2020 - Ultimate Rack Build Part 2
Products Mentions
Power Strip amzn.to/2KXaYEx
Table Legs www.diyroadcasesstore.com/cat...
Lid Connectors www.diyroadcasesstore.com/cat...
Label Maker amzn.to/3focPjt
Right Angle XLRs Custom by NLFX www.nlfxpro.com/
Become a Supporter of the Channel!! bit.ly/2O7OfWU
------------------------------------------------------------------------------------------
PICK UP SOME AWESOME DJ LIFE CLOTHING
shopdjlife.com/
------------------------------------------------------------------------------------------
MY TOYOTA TACOMA CHANNEL
TACO RICK : bit.ly/2tGFUQX
------------------------------------------------------------------------------------------
SOCIAL MEDIA
Instagram: / djrickweb
Facebook: / djrickweb
Mixcloud: www.mixcloud.com/ricky-weber/
Twitter: / djrickweb
SOFTWARE
Vibo vibo.io/
HoneyBook share.honeybook.com/djrickweb
------------------------------------------------------------------------------------------
EQUIPMENT I OWN
If you are serious about buying gear ($$$$) and want the best deal email my guys below asking for a quote. Tell them I sent you.
-ben@nlfxpro.com
-jeff@canalsoundlight.com
Please don't waste there time if you are not serious about buying!
Lights
-ADJ Inno Spot Pro amzn.to/31LZxXs
-ADJ Mega Hex Par amzn.to/2Fc333w
-ADJ Element Hex amzn.to/2WJs9N1
-ADJ Pinspots amzn.to/31Eyv3U
-Chauvet Wash FX 2 amzn.to/2WN820s
-ADJ Haze Generator amzn.to/2XjzHuk
DMX
-Chauvet Xpress 512 amzn.to/2WN860c
-Donner Wireless DMX amzn.to/2RgJ5JV
DJ Tools
-Anti Fatigue Foot mats amzn.to/32pQuKI
-ADJ Pro Event Table II amzn.to/2IS7zp8
-Vmoda Crossfade Headphones amzn.to/2Rp7Xze
-Fold up Laptop Stand amzn.to/2WPIULF
-Rock and Roller Cart amzn.to/2XazvOb
-Cable Bag amzn.to/2DqTETM
-Gaffers Tape amzn.to/2AVJyYc
-DJ Ear Plugs amzn.to/2CUjOgw
-Sound meter amzn.to/2CO0jdh
-Kill-a-Watt amzn.to/2pZMbVP
Speakers
-JBL VRX 918sp amzn.to/2Xd4KrR
-JBL SRX 815 amzn.to/2IOlrjT
-JBL PRX 712 amzn.to/2Xf4CIl
-JBL PRX 715 XLF amzn.to/2RkBsCk
-Avante A15 amzn.to/2MSrY2n
-LD System Maui 5 Go amzn.to/2RmWr7h
Mixers (Have + Recommend)
-DBX DriveRack PA 2 amzn.to/2FbR9GM
-Pioneer DDJ SZ (Serato) amzn.to/2WGwd0B
-Pioneer DDJ SX3 (Serato) amzn.to/2MRhalj
-Pioneer DDJ SB3 (Serato) amzn.to/2Riw4PS
-Yamaha 12 channel Mixer amzn.to/2KU1ivJ
-Yamaha 6 channel Mixer amzn.to/2IRsEQe
Truss/Staging
-Pipe and Drape www.georgiaexpo.com/product/b...
-Rockville Collapsible Totems amzn.to/2IKpFcp
-Global Truss amzn.to/2pUPFZD
-Global Truss Base Plate amzn.to/2CPKwKK
-Global Truss Top Plates amzn.to/2pVVndB
-4' by 4' Stage Risers made by ProXdirect
-Metal O-clamps amzn.to/2q57R2Z
-Safety Cables amzn.to/2NKkwl9
Stands
-Odyssey LT-P2 Tbars amzn.to/2RkAiXu
-OneStage Stands amzn.to/2RmW9xd
-Speaker Stand Scrims amzn.to/2IQzuWn
Mics
-Audio Technica 3000 4th Gen Wireless amzn.to/2WSQqFH
-GTD Audio G-733 Wireless Mics amzn.to/2IKHqZh
-Audio-Technica ATR-1300 Mic amzn.to/2RldqXv
Cables
-XLRs (Hosa) amzn.to/2DnHZVl
-DMX (Hosa) amzn.to/2CSiQAX
-Power (Hosa) amzn.to/2DqTUBw
-Power (12 gauge Light up ends) amzn.to/2CNZYr1
-Multi outlet cable (Hosa) amzn.to/2RUrkQi
------------------------------------------------------------------------------------------
For Business & Booking Inquiries Contact to me at
DJRickWebinfo@gmail.com
------------------------------------------------------------------------------------------
MY MULTI OP DJ COMPANY
Fusion Sound and Lighting
www.FusionSoundandLighting.com
Facebook: FusionFSL
Instagram: fusionsoundandlighting
------------------------------------------------------------------------------------------
VIDEO GEAR
-(Main) Cannon G7x Mark ii amzn.to/2B3ntfy
-Cannon G7x amzn.to/2iNVN3a
-GoPro Hero Plus amzn.to/2iO0RER
-DJI Phantom 3 amzn.to/2iGFlOJ
-Joby GorillaPod amzn.to/2jvlbM6
-Seagate 2tb Hardrive amzn.to/2tr6wTb
-Samsung T3 hardrive amzn.to/2tWVKpM

Развлечения

Опубликовано:

4 май 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 143

@DJRickWeb 4 года назад

What you think? Products Mentions Power Strip amzn.to/2KXaYEx Table Legs www.diyroadcasesstore.com/categories/i-really-need-that/table-legs.html Lid Connectors www.diyroadcasesstore.com/categories/i-really-need-that/table-legs.html Label Maker amzn.to/3focPjt Right Angle XLRs Custom by NLFX www.nlfxpro.com/

@nyc_djyounglb 4 года назад

Only 58 dollors im gonna grab that quick

@ibodyclan5613 4 года назад

DJ Rick Web I think you need to post a equipment tour right now

@kevinbrown4119 3 года назад

Hey Rick, In terms of stairs, I'm 63 years old and do most of my gigs in NYC. Stairs are common and I have a rack similar to yours. I sometimes have to carry it up the stairs. It's just part of what we do. i don't know who was complaining about that bring an assistant with you. Love what you did with your rack though. Keep up the good work and the great videos.

@Rick_Sanchez_C137_ 2 года назад

Great video! Years ago I worked as stage crew and had an idea to make cases for portable workshop like the cases the music gear gets hauled in while searching for videos on the gear crates I landed here (thankfully, the tables would work great for feeding and exiting boards on portable table saw, router table, etc.). Thanks for the ideas!

@pdk005 3 года назад

Not even a DJ but stumbled on your video looking for inspiration for a separate project. Awesome build!

@mjolles1976 4 года назад

Great job Rick! Always looking forward to your vids man! Well my rack build begins tomorrow, will keep you posted! Stay safe and keep up the great work.

@marvinlusk7303 3 года назад

RE: Table latches making it necessary to put the rack lids on "upside down" I roadie for a band and we had the same issue. The answer was to add a 3/4" plywood baord between the rack and the wheel (caster) board. It lifted the rack high enough to allow the lid to be put on "right side up." That will make the top of your closed rack a lot smoother. Kudos for "bending Reality" to accommodate your needs.

@drumskentala 2 года назад

Fantastic! I do sound for a band and am having something just like this custom built. One side will be for the audio and the other for the lighting and several drawers will house all the things that are currently split between a couple pelican cases and cable trunk. No more asking for tables or dragging a separate plastic table out (last one got left at gig). Great video!

@Lordblanca 4 года назад

Love the bins. Very functional. Great idea

@DeeJayShowTime 4 года назад

good job Rick. dont listen to the haters and their "what about stairs". most of them dont have multiple system configurations like you. keep up the good work.

@djjesse1294 4 года назад

That's really cool Rick. Nice job as always. I like how you modify your stuff to make things easier. Take care. Be safe....

@djhurtutorials 4 года назад

Cool DIY djtable/rack rick! thanks for sharing...

@odibaana6436 3 года назад

love the idea! great job rick!

@djlz805 4 года назад

Forget the Haters! This was GENIUS! Great job!

@deejayal4138 4 года назад

THANKS!! RICK FOR EVERYTHING YOU BRING US.. YOU'RE A GENIUS!! ONE THING YOU SHOULD TRY.... I USED TO DJ AT A SKATING RINK YEARS AGO.. AND MY BUDDY BUILT ONE OF THOSE THINGS FOR ME BUT HE ADDED AN ADJUSTABLE SCREEN OR MONITOR SO I COULD USE IT AS MY MAIN MONITOR... WE HAD AN OLD DESK TOP TOWER HIDDEN IN THE RACK AND THE SCREEN HOOK UP TO IT USING THE FIRST OR ONE OF THE FIRST DJ SOFTWARE... NAMED " CARROT INNOVATIONS " (VTT).. AND WE WERE THE KINGS OF THE ROAD.. GOOD TIMES!! BUT YOU SHOULD TRY IT SPECIALLY NOW DAYS WITH THE TOUCH SCREEN MONITORS... YOU WON'T REGRET IT...... KEEP HAVING FUN THANKS!!

@TheRealDjMikeStone Год назад

Thanks for the video Rick. Awesome Job on your build. If it serves your purpose then all is well. Very clean set up as well as description of parts you used. I am looking at doing something like this but on a smaller scale. I currently have a lot of separate pieces that I would like to combine in one single unit to minimize my work area. I currently have a 6 foot table with a DJ booth that fits in a bag. It’s all made from cloth and PVC. Love your channel as it brings so many ideas to the table. Keep up the good work. DJ Mike 🎤

@thepoppychannel798 4 года назад

So excited!

@djnyricankissemmeefl8547 4 года назад

Like this idea. Great job.

@richardpowell4667 3 года назад

Hey! Pretty neat. If you wanted to line up your front and back / left and right, you put the tabs on the lid for one side, mark where the collar goes, then do the same for the opposite side. Then you do the tabs for the second lid. Nice job.

@HottJumbulia 3 года назад

Rack drawers and doors add way too much weight also. Wtg with the bins!! 👍🏻 Awesome tables!!! Solution 1-provides a place to put bulky space robbing lids that constantly slide all over the place. Solution 2-always need a place for cards, pens, shirts and merchandise Solution 3-unload gear bins on surface without kneeling on nasty sticky concrete club floor! Etc etc etc.

@mattlewandowski73 2 года назад

Those legs needed some leveling feet to be able to adjust that last inch where it is needed. thanks for a great video. I had been trying to figure out what hardware I would need to make flight case desks. I do emergency communications as a HAM radio operator, and always wanted to set up a portable station that I could just arrive on site and quickly have everything set up. The pelican desks are obscenely expensive.

@Camzee 4 года назад

love your videos man!

@CoroaEntertainment Год назад

Most of my case building supplies come from TCH Hardware (locations in the US & Canada). As for going up stairs... two words, Appliance Dolly. They have dual rubber tank tracks built in that makes rolling up each step much easier. After seeing a furniture company using one to carry a fridge up a flight of stairs, I was sold on it. I've even seen some versions that can be converted into a 4 wheel dolly (kinda like a Rock-N-Roller), but those can be expensive.

@DJMichaelKhoury 4 года назад

Love these videos 👍

@jaysecure 4 года назад

Haha.. I wondered why you were going to this much trouble. Makes sense now. I say that because a few years ago, I had a roadcase basically the same as that. The differences were that mine had a fold up mixer rack up top, and both the covers already had hardware built on to use them as tables. (Just the mounts were about half way down the case which use to bug me.) But cool to see someone build their own nonetheless.

@krankdatRuGBY 2 месяца назад

Great idea👍🏽

@ABD4VIDS 2 года назад

Awesome setup

@djcalvin681 4 года назад

Great build excellent film work dope rack bravo

@markrhoden172 3 года назад

Fantastic Build!; but if you wanted to pull that up stairs or roll it out remote...just put it on a hand truck...it can go anywhere...having it all in one place is much better than a hundred trips to the trailer or in and out of gear boxes. NICE WORK!

@bmwthedj 4 года назад

This was a dope video...

@djHughesFishers 8 месяцев назад

Excellent Content!!! THX

@donyojimbo 3 года назад

i just love this video

@pierredelux2319 4 года назад

Amazing!

@bimatvug 2 года назад

I am definately staying on this channel... i will be here for a while for sure.

@frankbradley1710 4 года назад

Rig looks good. Very good thinking. One suggestion. I noticed on your analog mixer that the channels coming from your Dj controler are panned to the center. I'm not sure if you keep it this way or not but you should pan the left channel to the left and the right channel to the right. This way you keep your true stereo image and don't lose any panning effect the track may have. Otherwise if you close your right channel the right speaker will stay on because the left channel is still feeding it. Not sure if you knew that or not. Most Dj's in my area have no clue about audio at all. It's really sad.

@DJRickWeb 4 года назад

Lol. Yeah. I haven't actually used this setup since the whole no gig thing.

@markscott4297 4 года назад

I like your live stream set up

@isettech 2 года назад

Hope you get gigs so you can get the lower priced XR18 rack mixer. The rack mount X32 is quite a bunch of money and has the screen and USB recorder, but it is over double the price. Love my XR18. Large enough to mix a band at an event for value added service.

@prtyworx608 2 года назад

Hey Rick thank you for the content that you put out. Question, the lid connector link takes you to the table legs. Can you repost the link where to get those locking table connectors or tell me where to get them from. Thank you!

@LunaMayonaise 2 года назад

Part number for the latches is R1606 on Penn Elcom’s website.

@James_Bowie 8 месяцев назад

Love those table legs! Re the missing adapters, did you omit to order them or were you short supplied?

@RoyalSingleton 4 года назад

Very nice build. I’ve been looking at that cyber power conditioner but wasn’t sure about the quality. What do you think of them. I still think you should get the one space Samson rack mixer.

@DJRickWeb 4 года назад

I like it. It plugs into the furman so that makes it better

@Antweezy 4 года назад

idk but the quality of this video is crisp. that camera is nice .

@DJRickWeb 4 года назад

Same camera as always. Lighting though that changed recently.

@josep7831 Год назад

What screws and nut are you using for the locks and for the table legs,I like your videos you on point

@DJRickWeb Год назад

I used rivets on everything

@TheRealDJKodeBlue 4 года назад

You’re welcome for the idea 😊 hope it helps out makes it easier to setup

@Lockwood1000 4 года назад

Hey there Ricky! Great video, keep it up. Btw, what are those JBL Control's doing back there? I'd imagine its an install that was supposed to happen...

@DJRickWeb 4 года назад

Install. There will be a video on it whenever it ends up going in. Construction on the building is way behind schedule due to everything

@Lockwood1000 4 года назад

@@DJRickWeb Cheers DJ Rick Web, thanks for letting me know!

@graybentley 4 года назад

Very Very Bro Love It

@BmooreproductionsIN 4 года назад

nice and sweetwater.com should have stuff in stock and is here in the US

@theSLRtist 7 месяцев назад

Gives me an idea to do the same thing but put the lids together so I can have a long table that's potentially flush

@OscarGarcia-xq5jg Год назад

Hi rick that’s a great idea I have a rack similar like yours but l love all the hardware you use on yours as table legs and connectors please send me the link to buy them

@DJRickWeb Год назад

Link in description

@blomproductions 3 года назад

If you want a good digital mixer then you should go with the Behringer X32 Rack Go get it when you can and feel for it I Realy recommend it

@mexicalpango 4 года назад

Hey rick how many people (dance floor) have you played with 2 srx815p speakers also considering they have subs?

@DJRickWeb 4 года назад

Max 200

@sangeensingh 3 года назад

Hey rick! With the right angle XLRs, do you still think you need 6Us for the sound board in the rack?

@DJRickWeb 3 года назад

I do. I like the ability to trouble shoot if needed or plug in another source

@DjTRex08 4 года назад

Most road/flight company's make a case like this already. any reason why you went for the pull draw for the mixer and not a Slant-Top for the mixing Console?

@DJRickWeb 4 года назад

So I can use the top as a place to put my laptop or other things. Dont plan on actively using the board at events. More setting levels and minor adjustments.

@DJNugget 4 года назад

🔥🔥

@originalvonster 3 года назад

Would this hack turning the lid into a table work for a rolling speaker flight case too?

@DJRickWeb 3 года назад

Possibly

@djnyricankissemmeefl8547 4 года назад

Lest equipment to caring in and fast plug and play...........👌🏽👍🏼

@crooker2 2 года назад

Hmm... I have a 10ru rack that only stands 20 inches. Do they have extendable table legs that would fit inside a lid that small?

@thepoppychannel798 4 года назад

Are you doing an updated equipment tour?

@DJRickWeb 4 года назад

Filmed it yesterday will be out later this week

@andrewbaker5972 4 года назад

can you do a mock setup for normal gigs in your garage because you have all the hew gear and the rack?

@DJRickWeb 4 года назад

I mean yeah. What would you like to see with that?

@thepoppychannel798 4 года назад

Can you do the biggest setup you can. with everything!!

@DJRickWeb 4 года назад

Wouldnt fit in my garage I need a full size gym for that.

@andrewbaker5972 4 года назад

@@DJRickWeb you said you have free time and that would be a cool video idea and @Bayardo Rugama started a challenge like that

@nyc_djyounglb 4 года назад

I love the case build what happened to the video that you put up with the power thing inside of the trust I want to watch it but it said you took it down

@DJRickWeb 4 года назад

Needs refilmed

@itsnandobaby9347 4 года назад

where did you get that bark for the trees? Would love to see that on my truss totems.

@DJRickWeb 4 года назад

China

@DJRickWeb 4 года назад

Lol corona doesnt last more then a few days on surfaces

@DIVIDETHEFALL 3 года назад

What size rivets did you use to mount the legs to the inside of the lid?

@DJRickWeb 3 года назад

I think they were 5/16" can't remember

@crimsoninternetcompany3581 4 года назад

0:54 I Agree..

@TheMigrain 4 года назад

any reason you have set up to use two mono channels for stereo input and not one of the 4 stereo inputs? If you leave it like that remember to pan those L & R so you still keep stereo image.

@TheMigrain 4 года назад

A second thought. If you run your controller in XLR to that mixer you will be using the mic preamps when it isn't needed. TRS into that mixer to carry a line input unless I am mistaken. if I am wrong someone drop some knowledge on me.

@DJRickWeb 4 года назад

The first 4 inputs are mic/line switchable on the Yamaha mg12. There is a switch to jump between the two.

@DJRickWeb 4 года назад

Aware. It was more to keep xlr through the chain. And the board already has more inputs then I need. So why not

@TheMigrain 4 года назад

@@DJRickWeb so the switch you are talking about is the "pad" switch I think? that is for hot input signals be it either line or mic. but from what i read in the manual XLR inputs go to mic preamps and TRS connections through the combo jack by pass the preamp for line level. on page 16 of the PDF manual here (will not let me copy and paste the text from pdf /shrug) de.yamaha.com/files/download/other_assets/4/331024/mg20xu_en_om_e0.pdf. (edit was repeating myself)

@TheMigrain 4 года назад

This is the reason I am not a fan of XLR line level. causes issues when dealing with things like mixers with XLR outs and devices that link phantom power across inputs. 48v sent to mixer over XLR will burn the mixer or controller. but if you use XLR to trs in you bypass phantom power and preamps. (edit) reading the manual cause i am board and have no life. on that mixer phantom power is for all inputs so any XLR cable plugged into that mixer when phantom power is enabled will get 48V maybe making a bad day for a controller / mixer

@RadINation 4 года назад

I did the same thing a few years ago, but not as nice and thought out as yours.

@Erikgmz 4 года назад

Hey the right angle XLR Cable are custom made? Do you have a model #

@DJRickWeb 4 года назад

Email NLFX they do all orders on a custom one to one basis

@tolytes71 4 года назад

Just a suggestion get a black color been to match the rack.

@DJRickWeb 4 года назад

Wouldnt matter a white facade will hide it no problem. Comes down to the venue to see which color will blend better with the walls

@DJDXD 2 года назад

18:49 i was wondering why he had a spare sock in his gig tote 🤔

@DJRickWeb 2 года назад

Mic sleeve

@gonzaloloyola812 2 года назад

😂👌🏼

@prtyworx608 2 года назад

what's the name of the table connectors?

@redxband1994 Год назад

You’re not worried about the rivets scratching your equipment or not sit flush ? fabric could stop that if it did happen

@DJRickWeb Год назад

Nope no worries

@DjBriteEyes 4 года назад

Great Job Rick are you still able to work your day job? How long does it take you to make a video from scratch. Stay safe.

@DJRickWeb 4 года назад

Just started back last week. And depends heavily on the video. Like this one was three days worth of work probably 10 hours to make / film. Only take 3 to 4 hours to just do it.

@DjBriteEyes 4 года назад

DJ Rick Web thanks but wow I got to put more time into my videos. Glad you’re back to work now just need to get back to gigs. One more quick question I want to get moving headlights for my weddings or corporate events what lights do you suggest thanks again

@DJRickWeb 4 года назад

Adj inno spot pro. I own 8 of them

@DjBriteEyes 4 года назад

@@DJRickWeb Thanks just want something that gives that little extra.

@kevinholata9673 5 месяцев назад

@DJRickWeb what is holding your wireless mic transmitter

@TheDusty1985 4 года назад

Sure would be nice if you posted the screw sizes

@DJRickWeb 4 года назад

For what?

@javierlagos5968 4 года назад

En que estado vives ?

@rpitsas2004 4 года назад

I think pro x makes a table/rack thing like this but its wayyyyy to expensive

@DJRickWeb 4 года назад

Exactly. Built it myself for less

@rigofernandez6319 4 года назад

Are you going to repost the video of bringing power to your trusses.

@DJRickWeb 4 года назад

Yes. It needs refilmed first

@rigofernandez6319 4 года назад

Thx for the reply I’ll be waiting for the repost.

@djmidnightgonzalez6284 4 года назад

Hey man how much for that rack i want that$$?????

@DJRickWeb 4 года назад

See the first video. It has the link

@juanrios9977 3 года назад

where I can buy this case?

@DJRickWeb 3 года назад

You have to make it

@ethanmercado1445 4 года назад

Can you get a back facade

@DJRickWeb 4 года назад

Yes

@ethanmercado1445 4 года назад

It would look clean and they wouldn’t even know your there

@ethanmercado1445 4 года назад

Black

@andrebryant516 4 года назад

The make those that have tables already designed to do that unless you had the rack before you knew you wanted to do that

@DJRickWeb 4 года назад

Yeah but this route cost be a lot less then the pre made one.

@Camzee 4 года назад

first

@DIYRoadCasesTV 4 года назад

Hey Rick, fantastic video email me so I can hook you up with some stuff and I got some ideas, Steve

@custardavenger 2 года назад

Really good mod. With my engineer head on I would have worked out the height for the legs to be level with the top and drilled a new/custom hole for the leg positions. Also that way you always know which hole is the right position.

@DJRickWeb 2 года назад

I just used a sharpy to mark the right hole

@DJmanuelperez3 4 года назад

U a Foking Guiñes wow 🤩 wow

@shanebyrne3197 3 года назад

Great Rack.. but 8 adds in 25 mins .. ugh

@oscarahuatl7722 4 года назад

theirs no point buying a big rack case if you don’t have enough equipment to fit it in. You should buy a smaller rack case

@DJRickWeb 4 года назад

The thing is full what are you talking about?

@oscarahuatl7722 4 года назад

DJ Rick Web you put boxes of cables inside of it. That’s a no no

@DJRickWeb 4 года назад

There is no such thing as a no no. It's a road case you can do whatever you want with it

@chrishaney1954 4 года назад

Even if it isnt full it gets it to table height. And it has future expansion if needed. But anything smaller would be uncomfortable to mix at. Nice build. If I didnt get the krane amg 750 I would go this route. Probably going to do a 10u rack case. I have the Yamaha 10 channel mixer. I got the dbx rack also, audio technica 3000 series mic. A furman conditioner, when I get the rack probably get a 2u drawer for the mic and a slide out like yours for the mixer. I wonder why all my stuff is starting to look close to yours. New in the game and figured i could have some fun and build a set up. I have my own wedding coming up in october so I figured I would get all the gear and have it because I'm a tech geek. Running 2 ev elx200 10p on top of 2 elx 200 12sp subs. And ceremony set up 2 jbl eon one comps. Working on lighting now just got the chauvet quad wash usb t bar I will build from that. For real thanks for all the videos. Definitely got me into a new hobby the past 2 months.