Pipe Fence & Cattle Panel

Подписаться 235 тыс.

Просмотров 56 тыс.

50% 1

Pipe Fence Course is now open for enrollment Year around!! In this video I will be building a short section of 2 7/8 pipe post and top rail and then we will stick weld some cattle panel onto it. I will be using one welding electrode for this project, 5/32 8010. I will be using my gin pole and winch to carry the pipe. You can find digital prints of the gin pole as well as a few other digital prints on our website
arosswelding.com. You can enroll in the Pipe Fence Course at our trade school website arosswelding.school
TEXT ME - (405) 643-7176
AROSS STORE: www.arosswelding.com/shop
------------------------------------------------------------------------------------------------------------------
AROSSWELDING TRADESCHOOL - www.arosswelding.school/
Free Course Example - www.arosswelding.school/shop
------------------------------------------------------------------------------------------------------------------
Free Resources - www.arosswelding.com/resources
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
JOIN THE INNER CIRCLE: arosswelding.mn.co/landing/pl...
Details about the Inner Circle: arosswelding.mn.co/
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
AROSSWELDING.COM - www.arosswelding.com/
NEW CHANNEL WITH QUICK TIPS AND TRICKS
AROSSWELDING SHORTS - ‪@austinrosswelding‬
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Social Media links - come hang out after hours.
My Instagram: / arosswelding
My Facebook: / arosswelding

Опубликовано:

18 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@twcstransam 5 месяцев назад

I like the 2 modifications to the vice-grips you made.

@brian7327 6 месяцев назад

Glad you got them fenced in if they were mine they would have been looking for the one place I forgot great video

@birddog61999 6 месяцев назад

We always laid our toprail on cut one end to fit in the corner then put it in place and marked the top rail in the middle of the last post it set on. Then slide it down and cut it off, slide it back and your joint is now in the middle of a post so its less likely to break and it helps hide changes in elevation in the top rail. Nice fence though, you always do good work.

@Isaacmantx 6 месяцев назад

My dad did the same basic fence with his calf pasture and entrance, except he added a piece of sucker rod across the bottom of the panel, and mid-way up the panel.

@theboredcreative 6 месяцев назад

Great work. I'm starting to see something similar at ranches here in North Texas. It makes for a pretty good looking and sturdy fence. Good luck with that cow, man. We had a half Charolais/half Brahman cow jump flat-footed over a five-foot-tall corral without any effort at all. I wish I had a picture of our faces after spending all day trying to run her up on foot.

@Thomas-bv9mn 6 месяцев назад

The nice thing about this kind of fence is that cattle will see the top pipe. It's rare to have a cow jump that kind of fence unless provoked. That fence should take a lot of abuse and not fail. Cows always seem to be able to find a weak spot if you try to fake them out.

@mikenicholson2548 5 месяцев назад

Just weld a tab on the edge of both sides of the pipe halfway down. Have a 3/8 or a 1/2 hole drilled in them. Then you can bolt on a 2x6 or 2x8 rough cut over the top of the panel it will be there forever. I have done this for years, works great, and saves money.

@dwal2165 6 месяцев назад

Thanks for making.

@rickleever2296 6 месяцев назад

Great job Sir

@tobywilliams4614 5 месяцев назад

I did this across the front of my place with 2 3/8. Only difference in our black dirt I drove the posts. And had to cut my saddles vertical which ain’t bad. I just can’t believe that panels are $60 a piece and drill stem is $2.50 per ft now!

@nolanfrank582 6 месяцев назад

The cows were so interested in your work hahaha

@stevensaxon8888 6 месяцев назад

Austin, that cherry picker on your truck sure is handy .

@timmywarren2349 6 месяцев назад

Very good Video 👍 👍

@treetop5752 5 месяцев назад

I like a mid rail, keeps panels from getting bent up

@treetop5752 3 месяца назад

And a bottom rail sometimes, I used 3 rails and it'll hold ANYTHING

@bsquadrider 6 месяцев назад

Got any tips to help prevent the dreaded top rail warpage when you weld it out? Sometimes its worse than other's, but it bugs me taking the time to make everything level and that top rail sucks down on either side of the post.

@jaystewart9947 6 месяцев назад

Great job sir! Exactly how I taught you! 😂 just kidding. Ferdinand needs to know the error of his ways. 😅 on a serious-er note the pen/corral looks great!

@blakebiltwell5 6 месяцев назад

Than you for sharing! What’s the best black paint would you recommend for the pipe fence?

@wesleydirks4887 6 месяцев назад

I've got a question for those with welding beds, like yours. How do you get the acetylene tank down in the hole? How do you lift them?

@papalilburn 6 месяцев назад

Looks great, however, I'd consider running a sucker rod about one horizontal section up from the bottom. This keeps livestock from "rooting" the bottom up and ruining the overall look.

@tomsales263 6 месяцев назад

i hope they don't run into the same problem i have. i was using the 23/8" used pipe like that and after about a year of doing my fences i took the drops to the recycle center for scrap to get rid of it. well after taking it to 2 different places, they would not except it because it tested Radioactive. the pipe place i bought it at did not mention that there would be a problem to get rid of it.

@michaelbaca1496 6 месяцев назад

Use them on the bottom of your posts, concrete don't mind a little radiation

@SethBrooks200 6 месяцев назад

It’s actually salt still in the pipe. If you go wash it we hot pressure washer, it’ll knock out

@jasonblount7165 20 дней назад

Is there a video of the gen pole set up for moving and lifting the pipe?

@Logan-yx7cw 6 месяцев назад

You should tack weld with mig welder

@mattdickey5493 6 месяцев назад

Cows just don't listen sometimes. They will nose and lick things. Learned that trick about the clamp. Like it very well. The pipe you are using is it old drill stems or something else and what length does it come in? Let me know cause I use 2,7/8 of pipe for guard rails in industrial plants and warehouses.

@geraldqualls7439 5 месяцев назад

When you were welding the top rail together. What were you using ? Was it a guide to weid around the pipe ?

@michaelkilman5506 6 месяцев назад

Where do you get your pipe guide to trace out for cutting?

@charmainevandiford6622 5 месяцев назад

How much does the pipe cost on average. If cheap enough with the cattle panels it sure looks good and should last a long time.

@nelsonglass6 5 месяцев назад

Look like the cows are closed to harvest

@cumminsdiesel7979 6 месяцев назад

What’s the name of that clamp you used Not the c clamp ones. The one we’re you joined the two pipes

@ForestForTheTrees3283 4 месяца назад

When you weld posts that are already in the "ground" and grounded do you need to clamp your ground clamp on and if not, what do you do with it? I did just see that you did have your clamp on one end but I swear I've seen other guys doing fence posts and can't for the life of me see where it's grounded with a clamp... Can someone help me out with this one? Thanks

@VerdantImage 3 месяца назад

Where do you find the pipe? Everywhere I look it is unseasonably expensive nowadays

@yee-boe1961 5 месяцев назад

Whats that clamp called that you used to join the 2 sections?

@daltondotson3834 6 месяцев назад

Sounds magnetized lol

@erikslagter3231 6 месяцев назад

🎶You gotta keep 'em separated! 🎶

@neilheriot2361 6 месяцев назад

👌

@Blakedaanimal 6 месяцев назад

Ever used a post driver to drive pipe posts instead of the auger? Do you have a preference?

@JH-ii3jc 6 месяцев назад

We use a posthole digger and cement our posts in in dig able ground. In rock we use a rock drill then pound the pipe in with a pounder.

@trevormcelroy2553 6 месяцев назад

What’s on your torch handle?

@billbray5995 6 месяцев назад

Good thing you dont have Brahman cattle, that fence is just a minor hurdle for them. 👍👍👍👍👍👍

@scottjune3554 6 месяцев назад

I wonder if that cow will get arc fladh😮

@wayner806 6 месяцев назад

Why were you hammering on the pipe when you hadn’t finished the cutting? Got the C’MON shirt and it’s a favorite, comfy shirt. The money candle sits by my chair and smells great without burning it.

@specialks1953 6 месяцев назад

He mentioned that hammering the pipe while cutting was to remove the Rust inside the pipe. It probably helps the torch cut the pipe if it does not have the rust scale to punch through. That is a good question since you missed the hammering reason.

@wayner806 6 месяцев назад

@@specialks1953 thanks. I missed it indeed but that’s a great tip for used drill stem. “Learn something everyday,” A Ross

@arosswelding 6 месяцев назад

The hammering the end of the pipe after my cut was just to knock of the slag… save me from pulling out my grinder

@isaacag2169 20 дней назад

Do you Charge by hr or by foot bro ? And how much

@ardennielsen3761 6 месяцев назад

they do get ants in their pants at pickup time jumping over 5 foot fences sometimes... braking 5 inch wood posts and a bunch of nailed in 2x6's. 12 inch wood posts work to, but they a lot heavier then the metal pipe... full of that heavy wood treatment stuff. "old power line posts..."

@scottjune3554 6 месяцев назад

You gotta keepem separated

@jacerowland5534 5 месяцев назад

How much does 2 7/8s cost where you’re at?

@clintchew1019 6 месяцев назад

I’m not telling anyone their business, but I prefer to hang cattle or hog panel the other way so that the horizontals are to the livestock rather than the verticals, walking along the fence the animals are less likely to pop the spot welds and then it typically will not require a special modified clamp to tack to the drill stem to the panel. No disrespect intended, just an opinion, from one to another. The high pressure spots from livestock tend to reveal this more than others, but both are upgrades reguardless.

@altonemery9526 6 месяцев назад

When we are doing non-climb paneling, we always have the verticles toward the livestock/horses. If you get one that paws or climbs the hoof is more likely to slide down the verticles than get hung up on the horizontals and break the panel.

@HomerEscobar1 5 месяцев назад

How do you hang the panels when there's stock on both sides of the fence?!

@designfabrication512 7 дней назад

Are you using concrete on these posts or are you just tamping the soil around them? Thanks

@arosswelding 4 дня назад

I used concrete

@designfabrication512 3 дня назад

@@arosswelding Gotcha I saw that on one of your other videos. Great stuff and very helpful

@janetholt2412 5 месяцев назад

How deep were the poles in the groud.

@arosswelding 5 месяцев назад

About 4.5 feet

@jaymorgan8305 6 месяцев назад

hahaha ive always wondered if animals could get a flash burn.or if they would feel it?????? I always felt it. hahahahahahhahhhahaha

@user-fw3wh6qw1h 6 месяцев назад

Здравствуйте от куда вы я из Кыргызстана тоже сварщик к вам как устроиться работать мне завут Ырысбай

@CHlawn575 6 месяцев назад

What was your first rig for fence

@arosswelding 6 месяцев назад

The thumbnail on this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-m57EY0KMp48.htmlsi=WQN2GgZmsxFV1fK9

@CHlawn575 6 месяцев назад

Thanks

@williambaldwin941 6 месяцев назад

Need a pipe in the center ole bull will tear that panel to pieces

@fancyhitchpin8675 6 месяцев назад

If you were serious about playing farmer you'd have got an old tombstone for $40 at an auction and burned up those 7014s. More seriously, I'd consider putting up some hot or barbed wire on either side close to the top to discourage jumping and rubbing.

@user-me7ef2ug4u 6 месяцев назад

เป็นกำลังใจให้ครับ🌏🤝🇹🇭❤️🙏🛠️🚜🐂🐏🐏🐂🌽🦃🌽🐓🌽🦆

@sheilamclaughlin963 6 месяцев назад

On the top rail, why did u cut the collar off? Turn the plpe around and when u cut the upset off the pipe would slip 3-4 inches into the collar as a slip joint

@heartscards6335 6 месяцев назад

that stupid annoying music sucks

@sheilamclaughlin963 6 месяцев назад

Only a few cows will jump 4-5 ft high, most of them only if really crowded, the ones that jump above 5 ft go to town even though they r one of the best

@ethanbos08 3 месяца назад

I've seen a bull jump a 7 ft fence

@rmac0 5 месяцев назад

Any tricks for working with lined pipes? The load I bought to do my fence has a Teflon coating inside that burns like hell when cutting with a torch 🫤

@arosswelding 5 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eddh6-rR208.htmlsi=IijcosdKr23QJmks

@rmac0 5 месяцев назад

@@arosswelding thank you!