Pipe welding 101: Essential tips for beginners

Подписаться 56 тыс.

Просмотров 23 тыс.

50% 1

In this video, I will be welding the bottom ONLY with a 6010 bead 8010 hot pass and 8010 cap.Just getting started pipe welding. I think there’s something in here that will help you. If you have any Welding questions, leave them here 👇
Here’s the link to the welding lens👉 tefuaweweld.com/taylo
0:00 Intro
0:43 the fit
1:08 tacks
2:50 how to taper tacks
3:30 the root
4:34 Tying in the bottom
5:58 TEFUAWE Welding lens
6:57 turn it down move faster
8:34 bead repair
10:17 8010 Wormhole repair
11:14 don't worry about small wagon tracks
12:39 hot pass
13:05 70+ or 8010 filler
14:00 how to cap with 8010 down hill
15:55 Overview of the Finished product
Congratulationss on starting your new welding business. If I missed somthing, I have no doubt that I will find out in the comments. Thanks for watching guys Happy welding.
Tips for welding With 6010 ,70+ or 8010 and 7018.
Just getting out of welding school Here's some advice. I hope it helps people starting their welding journey.
#Pipewelding
#pipeliner
#7018
#6010
#RigWelder
#DownhillWelding
It’s important to go to welding school but it is more important to learn how to weld. It doesn’t matter what you do just practice and keep practicing. Nobody can hold your hand. It’s up to you. American Welding Society! Welding schools!
#WeldingSchool, #RodAngle, #TulsaWeldingSchool, #LearnHowToWeld, #7018, #6010, #taylorwelding, #weldingschools
I'm not a welding inspector, a safety man, or your mom. Do your own research. I'm not responsible for anything you do. Have an awesome, awesome day. Stay safe. welding tools homemade

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@TaylorWelding Год назад

👉15% off Link to Tefuawe welding lens F10/11 tefuaweweld.com/discount/TaylorWeldingLLC ☝️ (This is the one I was using)

@raycuevas2384 11 месяцев назад

Can i have pancake

@richh5824 4 дня назад

No book can teach this kind of skill! Also rare to find such a good teacher! Thanks for giving back to the community that made you a living and helping make it easier for new welders!

@osbaldohernandez9174 Год назад

This is coo most of the people I tried to ask to teach me just yelled and said your wasting time not my fault I’m tryna learn

@jimrad9525 11 месяцев назад

Welding full time now making things out of metal pipe plate beams handrails erecting on site welding on site all because I bought a welder and practice and spent £500 on a welding course traveled two hours aday to a steel erecting job fitting then two home takes effort if I can weld any one else can to 🎉❤

@pn4697 Год назад

My daughter took 3rd place in her welding competition. The first and second place went to guys that were graduating. She has another semester to go. She is happy with her result and loves what she is doing. Thanks again for the encouragement!

@TaylorWelding Год назад

That's great! The competitions that I was in welding really helped my drive and got me prepared for the future test. Tell her congratulations women make awesome welders

@jonathanpersson2488 11 месяцев назад

Apprentice fitter out of 393, been practicing my ua-21. Your videos have been a lot of help brotha, Hard finding welders willing to share in depth knowledge like this. 🤟

@TaylorWelding 11 месяцев назад

Glad to help

@andrewl9203 8 месяцев назад

It's a tough test. I'm working on mine too. You get your cert yet?

@abbottmorgan1968 5 месяцев назад

@@TaylorWeldingit’s amazing to see someone actually helping ive done every thing i can to contact someone for about a year and no one will respond ive even offered to pay for advice. RU-vids all ive had

@joachimsingh2929 10 месяцев назад

This is golden information. Almost nobody understands when you need to use a 5/32 rod. Thank you! // Joachim from Sweden 🇸🇪

@tefuawe Год назад

Many thanks to Chris for taking months testing our product. Good teacher and good tool, double the efficiency!👍👍

@TaylorWelding Год назад

Thank you for your patience.

@TaylorWelding Год назад

I really do like your lens I will be talking about it more.

@tefuawe Год назад

@@TaylorWelding We appreciate it🤛🤛

@MrJeepty 13 дней назад

Nice looking hot pass, especially considering it's a 8010 rod

@waiakalulu7544 9 месяцев назад

Learned a lot of new this one. I am a beginner so this is very helpful. Many thanks for taking the time to share!

@vendetta1306 4 месяца назад

It’s good to be back. Since last time I commented, I passed my red seal up in Alberta

@MBwelding 10 месяцев назад

Really cool taking the time to help a guy out I wish I had more people like that around my area I’m 90% self taught through trial and error but repairing farm equipment I kinda lucky with lots and lots of practice I used to read book after book I could find at the library on welding and a few older guys would pitch a tip my way as a kid but not allot I sure would like to work next to someone like you and really take my welding skills to a new level and possibly even get on a pipeline as a welder some day this is becoming one favorite channels on welding thank God for RU-vid it’s really helped reaching out and getting more perspective from different people on what or whatnot to do just more tools in the tool room and I feel more confident tackling new jobs I haven’t tried before and it’s working out better for the customers I help also everyone wins 👍

@TaylorWelding 10 месяцев назад

Thank you for your comment. I’ve learned so much on RU-vid it’s crazy. Ask any questions and will do my best to answer it or possibly make a video about it.

@namarhodge568 8 месяцев назад

Check out "arosswelding", " ICWeld," "CEE" & "onfire welding" all can be found on U-Tube channels.

@cs7285 9 месяцев назад

Love this channel! About to get into welding classes and your channel has given me a lot of knowledge. I appreciate what you do!

@comingtofull-ageinchrist6736 8 месяцев назад

Great video, thanks for the tips and visual instructions!

@WebflingerJoe 20 дней назад

Few fellas in the fab pod i work in love the lenses, got one myself have yet to actually throw it in my lid yet lol. Maybe this week 😅

@samuelscragg7052 Год назад

Thank you for the help. Your info is very helpful

@midnighttutor 11 месяцев назад

I find your videos very interesting because they are real world, not some guy in a laboratory with perfectly cleaned flat metal doing a butt weld. I only use TIG on sheet steel 18-20 gauge. If you have the interest there could be a lot of viewers who are looking to learn practical tips about this same process. Thank you.

@TaylorWelding 11 месяцев назад

You would have to teach me how to do that. I’ve never welded 20 gauge steel. Well, I guess I have, but not professionally.

@comingtofull-ageinchrist6736 8 месяцев назад

I grew up framing houses with my dad 11 and up, and that was one of the first things he taught me even earlier in life, was the hammer would hit where my eyes were focused!

@joachimsingh2929 10 месяцев назад

True color lenses are a big advantage. You can actually see what colour the weld/arc/markings are. No more green or yellow. 3M has several true colour lenses, ESAB aswell, the ESAB A40 true colour helmet is the same lens that the ESAB sentinel helmet has. Only cost around 100-150$ depending on country.

@fishnbees8491 Год назад

i could watch this all day. it just fascinating!

@TaylorWelding Год назад

cool

@jacobroberts6565 4 месяца назад

Thank you man. Very helpful

@kelleypack1000 7 месяцев назад

Man you’ve helped me so much, I’m not a natural at running beads. I’m 66 years old and trying to figure it out and do it right. There are several things you can’t help me with, one is I’m getting pretty shaky but I’m doing all right, another one is bad rods. I bought some cheap 6010’s at the welding supply that are red, I’ve tried everything and can’t make them work so I bought some of the better rods that are Lincoln 5p+ and man they are great and run smooth, 3/32 or 1/8. I’m welding with a 2010 miller bobcat, I almost bought a vantage 300 when I bought the miller but wish that I would have bought the vantage now. Thanks for all the help.

@keithtune6819 Год назад

Glad to see another welding video Your the man keep them coming brother

@TaylorWelding Год назад

Thank you

@mountains76 Месяц назад

Thanks for making this

@dave-mf5tv 3 месяца назад

Solid advice thank you

@jonathanbadillo6211 Год назад

Just on time man I just bought 2 pipe bevelers and been practicing after work when I can! I’ve been playing around with 5/32 8010 !

@TaylorWelding Год назад

That's cool jonathan let me know if you have any questions. Keep on practicing. You just need to spend time behind the welding rods

@jonathanbadillo6211 Год назад

@@TaylorWelding I’m actually looking to getting into the pipeline union 798 so I can have some pipeline experience as a helper! Any advice on that?

@derekgreen7319 9 месяцев назад

Great vids man!

@TalRohan Месяц назад

useful stuff thanks learning lots here.

@user-fr3ws2dk7y 8 месяцев назад

Thank you

@rrudd8755 Год назад

Chris thank for your information to the young people, I need to get my g-son started welding he's 10 yrs old 😊

@TaylorWelding Год назад

It's never too early I started getting interested in it when I was about 12

@SirCarlosMusicBMI Год назад

WOW 😮! You’re a great teacher 🙌. Wish that I lived close to you so I could learn how to weld by the BEST. This was fun 🤩. Btw I thought that you never wore shirts with pockets while welding….

@TaylorWelding Год назад

I don't unless they have a flap. It's something you have to learn. Hot nips will teach LOL

@gamerboy-ry4hc Год назад

Right on time

@gamerboy-ry4hc Год назад

I chick soon as I got the notification

@excerciseninja2902 10 месяцев назад

That’s so cool man

@wilmarmoss5211 11 месяцев назад

Great job ... teaching ....

@TaylorWelding 11 месяцев назад

I appreciate that Wilmar. I hope you're doing good bud getting too hot.

@nspiranec 11 месяцев назад

👍 Greetings from Croatia

@TaylorWelding 11 месяцев назад

Hello there!

@anonymous4507 5 месяцев назад

Honest question here: Austin did a two bead cap with 7018. If you're worried about the slag getting in front of the puddle, how come you don't just run uphill from the bottom instead of downhill from the top? I've watched a lot of your videos and they're very informative. Thanks for all the help you given me.

@user-dc4we2xv3y Год назад

Hey bud Iam from lake Charles started at 14 welding thru school and on weekends took pipe test in plants and learned mig in shops, became a crane operator but thinking bout getting back into after all these years just bought another 77 Sa 200, love your stuff brother, would like to talk to you

@TaylorWelding Год назад

That's cool man I have done all those things as well. I really enjoyed operating a crane it just did not pay the same.

@paulusmarc 9 месяцев назад

Bon Boulo😆😆👍👍

@carlostovar5713 11 месяцев назад

U got my gloves

@hanford_adventures Год назад

te-fu-awe is how you pronounce it. and i love their lenses. they just released a chopped version of a pipeliner, im thinking of picking up it to try one. they got a flip up lens version and a normal fixed version like the traditional honeywell hoods

@TaylorWelding Год назад

Thank you. Wasn't sure how to pronounce it. If you get the hood Let me know if you like it. And use my code to save 15%.

@hanford_adventures Год назад

@TaylorWelding I always said te-fua-we but heard it pronounced in a video by one of their reps as te-fu-awe. And yeah I'm thinking about it! Nice thing is, it's painted like a silvery color. I'd just have to chop the top flat and add a leather cap to it like my other pipeliners. And will do!

@hanford_adventures Год назад

@@TaylorWelding glad to see you're back to making videos. Have been lookin in anticipation for them because I like your vids alot

@eyeraskinswhatever1770 2 месяца назад

If you step step step out of it, will it make an arc flash on the weld?

@gunnerlrr Год назад

Hey sign me up for your welding class

@OVERCAPITALIZE Год назад

For the hot pass, do you necessarily have to “step” “oval” shape pattern or can I just go side to side like im doing the cap.

@TaylorWelding Год назад

Whatever works buddy. Everybody Welds different. But remember a hot pass is hot. You don’t have a lot of time to screw around.

@mrListn 9 месяцев назад

Crazy we run uphill 6010 all day my teachers would bug if they saw me dragging a slug downhill

@mrListn 9 месяцев назад

Any tips for someone comfortable running a 6010 uphill if they find themself in a situation where the wps calls for downhill?

@TaylorWelding 9 месяцев назад

I don’t know what to tell you other than practice. Every fit it’s different, every machine is different, If it was me, I would not run a 3/32 gap But that’s what most uphill welders like. I would running a little bit tighter and little bit hotter.

@falloutla7137 Год назад

More uphill pipe content if you can good sir

@TaylorWelding Год назад

10/4

@joelambabama8999 11 месяцев назад

How do you start out getting a pipe welding and fitting job for the oilfield/ oil and gas companies? Do you contract yourself as a welder/fitter or do you have to have a welding rig, do you walk on a refinery and ask? Call big name companies? Go to a welding company and hire on with them? I’m thinking about going to a welding school just to get a lot of reps and learn TIG and downhill. I also have a year+ of pipe fitting. Any help would be so awesome.

@TaylorWelding 8 месяцев назад

All of the above Joe. I’m not being a smart ass either. Do whatever it takes. School is a great place to straighten the learning curve. Highly recommend it as far as what school doesn’t matter too much. Just make sure they’re willing to help you with your questions, and if you have any questions, ask me, I’ll do my best to help you

@jeg791 6 месяцев назад

Is it advisable to stick weld on pipes? Is it something that isnt possible with mig?

@mider9996 9 месяцев назад

Are you reinforcing the weld or pipe?

@fztfabs65 Год назад

Question Chris, you guys were beading with 1/8”. What heat were you running for that small of a gap? And then another question, if you were running a 3/32 Gap and beading with 1/8”, what heat would you run? I got a vantage 400, and I’m gonna be getting into pipe welding within the next few months, I’m just trying to learn my machine for 6010, been struggling with it when I practice

@TaylorWelding Год назад

Holy Moly 3/32 gap is way too big. if I had to run a 3/32 gap I would turn it down Or maybe use a 5/32 6010

@fztfabs65 Год назад

@@TaylorWelding I guess I should have clarified. I’m doing a 5G/2G weld, 6” sch80. It’s for my initial B pressure. Hence why I’m running 3/32 gap

@echoserenade 10 месяцев назад

I come from a structural, shipyard background where everything is uphill welding. Is downhill standard for stick welding pipe? Or is this just for the root? Havent looked through all the videos yet

@TaylorWelding 10 месяцев назад

For pipeline it's very common

@Florien77 5 месяцев назад

What part of louisiana do you live in

@alanbutler7712 9 месяцев назад

Any recommendations for building up material? I have an AC welder, needed to make drive wheel that connected directly to an electric motor shaft. I found four pipes that tightly nested and was able to cut the first for the keyway. But, I needed to increase the outside diameter about 1/2" - 3/4". I started with 6011 at 75-85 Amp... but switched to 6013 and turned it down to 60-65 Amps for the last couple of layers. All of these rods were 3/32". They didn't want to build up material very much. I did a diagonal criss-cross patern instead of solid. Any ideas? Thanks

@TaylorWelding 9 месяцев назад

are you just using what you have?

@TaylorWelding 9 месяцев назад

how thick is the material?

@alanbutler7712 9 месяцев назад

@@TaylorWelding Yes, I am using what I have. I do have 1/8" 7018s, (from when I was using a DC welder to build our horse barn.) I have some 1/8" 6013s, but thought I would encounter a lot of sticking at the lower Amps. Plus I had 4 times as many 3/32" rods. The material is a cylinder with a 5/8" arbor hole, then is built up to be about an inch thick just with the three nested pipes. The outermost pipe is probably about 1/4" thick. I managed to get 3/8"-1/2" of metal added to this through multiple weld/grind cycles. After welding, I would securely attach it to the motor, turn it on, locate the high spots, grind them down enough to run the angle grinder on it while it was spinning to level the surface, and add more material where it was still low.

@alanbutler7712 9 месяцев назад

@@TaylorWelding Since I am self taught, and only sporadically weld, I believe that it is possible to not have the power high enough to get a good weld, or get interference from foreign material that will keep the weld from penetrating appropriately. This would create a huge build up of material, but without being secure, which I don't want. I had forgotten that the 6011s were deep penetration rods, that is why I started with them instead of 6013s. Should I use other material, (like old rods cleaned of flux), to build up the thickness of the weld quicker? I didn't think of that while I welding on it. Thanks for all your help!

@gavinmusgrove9258 8 месяцев назад

What’s your thoughts on the union? I’m about to graduate and I want to pursue a career in welding and my local union has reached out to me to try and get me to work through them. What are the downfalls and upsides? Would you recommend doing it? Thanks.

@TaylorWelding 7 месяцев назад

It wasn’t for me

@neilshahndynasty.8882 Год назад

Buy Silver and Platinum .

@JohnSmith-lv8xk Год назад

Did you guys pull up in a city park to weld pipe ??

@TaylorWelding Год назад

lol no not quite. We were just on the edge of some property that at own.

@TaylorWelding Год назад

Trying to just stay in the shade

@raycuevas2384 11 месяцев назад

Can i have your pan cake bro hehe

@TaylorWelding 10 месяцев назад

😅

@gunnerlrr Год назад

One thing I saw on Austin’s side he needs to start on the bead and not the bevels

@TaylorWelding Год назад

good point

@joseramirez-xo6mn Год назад

60105p how hot

@TaylorWelding Год назад

all machines are different. Hot as you can stand it

@mikepi6601 2 месяца назад

Honestly very averages skilled welder , a lot of bad technique and habits developed

@TaylorWelding 2 месяца назад

I’m sorry to hear that. Keep watching you’ll get better.

@jackowens9440 Год назад

About time for a video, ? I,am a shaded tree welder going to work on my truck what rod do I use on Frame 6011 or 6013 weld up hill or down. Jack from Va you should have my phone number