Pixel 7 Pro Screen Replacement: Replace Your Own Screen 

I don’t have a Pixel 7 Pro. I just enjoy watching your videos and using your tools. Keep up the great work, iFixIt team!

Perfect tutorial. Short, sweet but gets the info across clearly. Made for a nice smooth replacement, cheers!

I did this myself nearly a year ago! My hands were literally shaking

I bought your kit and worked almost perfectly. It was like the adhesive was a few mm too thin, so on both sides it did not go to the edges but rather 2 mm inside in both sides all the way up. It’s impossible to correct once you lay it down as trying to loosen the adhesive just stretches it and makes it bulge. So be extra careful or cut the plastic in two to be able to stretch it to the edges in both sides when applying, I hope it still seals the phone and keeps the display in place. Great video, and a normal suction cup is enough, you don’t need the fancy clamp.

Great video, also found that you sell the adhesive separately on your webside, cheaper than the ebay marketplace. Thank you for making these videos! 🙏

I just won a brand new replacement screen for my Google pixel 7 pro, got it for $7.00 , but it'll cost me right around 10 bucks when it's all said and done after taxes and fees, still beats the hundred+ dollars Amazon wants for it. I've never changed a broken phone screen before but I'm pretty handy with my hands so I'm sure i can do this. I literally just won that replacement screen like 5 minutes ago, that's why I'm looking for these how to videos, gonna pick the screen up tomorrow hopefully and I'll come back here and post how it went, thanks for the video with instructions, this is what RU-vid is for .!! I have learned how to fix so much stuff from just watching videos, probably saved myself thousands of dollars by simply watching videos💪💪 Can't beat it

Just finished my 2nd Pixel 7 Pro screen replacement. Quick and easy repair. These videos help a lot. Thank you!

Also be careful of the capacitors near the screen ribbon, otherwise you could dislodge them and brick ur phone

I've noticed this in one of the older videos, but you've called the Anti-Clamp as iOpener by accident at 1:38

Soon i will order one for my google pixel 7 pro ❤

I'm just about to do it. What I have found with previous phones is that the chassis gets dented, the screen won't sit properly on the adhesive. Also because the screen is slight twisted it will crack easier. Instead, I found it best to use silicone. That fills any gaps and allows the screen to sit in a nice flat plane. Also because there is no metal on metal it strengthens the screen from shocks. Plus it's hydrophobic... My chassis isn't dented this time, so I'll give the adhesive a go, but if it won't take properly, I'll go back to old faithful.

FINALLY A VIDEO???!

Just couldn't have shown that black adhesive being removed from the camera hole? I had to remove the screen to remove this tiny piece of adhesive, destroying the gasket in the process. Now I'll need to open it a third time to do the replacement right.

Hello. What about the Minisforum V3? Will there be a review of its repairability?

I wish the pixel calibration software was more consistent. You need it post-repair to get fingerprint sensor to work and it’s been so hit or miss

I would really appreciate soldering how to video for pixel USB-C port replacement.

THERE IS A DUST COVER ON CAMERA. On the new screen wasn't in the video I almost didn't catch it.

Bought your screen replacement and the oleophobic coating is mostly gone and burn in on the home bar after less then a year

220 quid is a bit much for this imo, thats more then half of the value of the phone used. i can get it repaired by google themselves for £200 so why is my own installation more expensive

It’s soo difficult to connect the cable

Thats not the reason why the parts are expensive. They have to pay for overhead and employees i used to run a phone after my friend left it was too much by myself so i closed down

Why not just do the job correctly and swap the fingerprint flex also ? Gives the customer less hassle, unless its broken of course !

200 plus replacement parts ouch

Hey y'all. Catch a Gigaset GX6 Pro and let us know how repairable this handset is. Has the basics; phone jack, SD card, dual SIM, and get this - a *replaceable battery.* I'm looking at it as an upgrade to my current (and no longer supported) LG products, and anything that's like my LG P870 catches my attention.

Why ifixit still not in INDIA?

1:37 "Slowly turn the handle of the iOpener"

I ordered a screen and it was damaged plugged it in and it looks like a rainbow and and flashes my broken screen work better so I know it's not my phone

Parts are expensive on your site. It costs more than what many phones are worth in the used market.

Or just buy a new one for 399 from woot

- [00:03] 📱 Replace your cracked Pixel 7 Pro screen with our DIY guide. - [00:34] 🛠 Gather the necessary tools and materials for the repair, including anti-clamp, isopropyl alcohol, iOpener, suction handle, opening picks, tweezers, spudger, FixMat, replacement screen, and display adhesive. - [01:15] 🧲 Use clear packing tape to help the suction cup adhere if your screen is cracked. - [01:30] 🔥 Ensure phone battery is below 25% and power off the device before starting the repair. - [02:14] ⚠ Use caution around the screen cable and spring contacts during removal to prevent damage. - [02:57] 📸 Lift the screen carefully like opening a book to avoid damaging the flex cable. - [03:28] 🔄 Reinstall new adhesive by cleaning the phone edges, applying the adhesive, and securing it with pressure. - [04:19] 🖥 Reconnect the display flex cable and secure it properly before reassembling the phone. - [04:48] 📚 Apply pressure on the phone with heavy objects to ensure proper adhesion of the screen. - [04:57] 🔍 Calibrate the fingerprint sensor after screen replacement using the provided guide.

I dropped mine in a toilet…what do I do??? 😬

:D

first

Those steps to remove the old screen only work if your screen is not shattered... so this is kind of misleading tbh.