Polaris 570 Rebuild Part 1- Teardown 

sweet coffee cup. thanks for the video.

Very helpful, thank you for doing this!

Great job buddy! Keep it up!

Fantastic video, I don't even need to teardown my 570, started watching this video on a whim as I came across it & was drawn in. Subscribed

Im about to build one myself. I'll be posting on my channel. Great video, very helpful!

Good job

Someone ran diesel through ours at work, with summer coming up I'm weighing the idea of fixing it and running it for the summer.

Awesome vids! Thanks!! I poked a hole in my oil pan and ran mine out of oil till it seezed. I got it broke loose, but didn't run. So I thought it might be rings and cylinder. There is marks, I was hoping it's just that... But I'm rewatching your video to see if you showed there was play between the connecting rod and crank shaft? I can pull the connecting rod up and down on the crank, I think it's shot too?

Top.

Nice video. I'm having an issue. The engine turned over just fine the first few compression tests, then it ran smooth twice just heating up and letting it cool down. ISSUE- Next compression test the starter just spun and didn't engauge to turn the engine over. I have proper voltage to the starter. The starter is new and spins as it should. My issue seems to be that the starter gear doesn't engauge the gears to turn the crank. Any ideas? Also, should there be a snap ring between the timing chain guide and the crank gear?

Was the crank gouged and need to be replaced? I’m about to try this rebuild as well and I’m a little intimidated with this. Thanks

If you pull silver head bolts out, can you replace them with the black ones? I hate the torque specs for the smaller silver (180* the another 180*)ones and I've not found an answer anywhere. Thanks.

Can You add the part kit in the description you bought

Good video of a complete 570 teardown....I think it's the only one that I could find on youtube. What do you have into parts for this rebuild?

Do you have a part number for the complete rebuild kit from Polaris ??

Do u have to take the motor out of the 2019 570 to do the top end??

Do you have a video on how to remove one?

Would this tear down apply To a 2016 ranger 570 engine?

Hey I have a question I have a 570 and I dusted the motor. But no metal and nothing blew up it was still running just had water and dirt in the system. I'm rebuilding myself I'm on a tight budget but do you think I have to change the oil pump out if it's not scarred up reuse it and put a new oil pump chain and timing chain and upgrade the timing tensioner.

What happened to part 4?

Would u rebuild one for someone

Where did you buy all the parts to rebuild it?

They try to turn the engine over with a flat screwdriver that’s is why the cam is broken