Wish you would have shown the cutting of the hole for the switch. I am installing lights right now and seems like if the hole is not cut just right the switch will not snap in properly. Thanks for the video though, it was helpful!
Ah. I just cut. It with a razor. Knife right. Along. The. Edge of the pre-marked deal nothing crazy is. Yours. Not snapping. In i think i kinda. Shimmed a pick behind it. To pull the. Switches. Latching . Out a. Bit to catch with the. Other switch out
Just a ebay light. Link is in description but here it is sorry www.ebay.com/itm/143774838497?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=EnvMMteZQ5m&sssrc=4429486&ssuid=tKcFeJBXRha&var=&widget_ver=artemis&media=COPY
I have read so many different ways people have wired this. I want to hook it up so nothing works unless the key is on. So do you recommend plugging the hot wire with the fuse to the acc of the pulse bar? or put the hot with the fuse to the hot on the pulse bar, negative to negative and then just running a separate wire from the Acc on the pulse bar to the plug on the back of the rocker switch? It would be ideal if there was 3 wires on my harness.
@@TheRogueOnes I ran the fuse wire to the hot on the pulse bar, and ground wire to ground. It stays active all the time and doesn’t turn off even with the key off. You said something about making the white wire on the relay come off and go to acc or something so it only works when the key is on. That’s what I want to do.
@@HeyItsAsmus you need to use. The third wire to the switch instead. Of the relay then i will have a update to this as soon as i get time. Now that i have the connectors
