Polaris Sportsman Oil and Filter Change

Подписаться 7 тыс.

Просмотров 96 тыс.

50% 1

If you have never primed a oil system on a atv please take your atv to a mechanic. Priming is done for 20 seconds and will here a whistling noise as its being primed. The oil change was done with a amsoil high flow filter and amsoil 5w-50 atv/utv oil. This was done on a 2012 polaris sportsman 500H.O. Browse my other videos there might be something in the video library you might wanna watch.
Polaris Sportsman Greasing Grease Zerts And Cleaning:
• Polaris Sportsman Grea...
Polaris Sportsman Transmission and Rear Differential Fluid Change Video:
• Polaris Sportsman Tran...
Polaris Sportsman Front Differential Fluid Change:
• Polaris Sportsman Fron...
Check the links out below and if you buy amsoil online, the best way to buy amsoil is by becoming a preferred customer (more info in links below). Amsoil links are below they have something for every application. Please use my dealer number 5541460 if this video helped you out when ordering amsoil and I can keep making videos.
Amsoil Atv Lookup:
www.amsoil.com...
Amsoil UTV Lookup:
www.amsoil.com...
Amsoil products in this video:
Amsoil 5w-50 Atv/Utv oil:
www.amsoil.com...
Amsoil Atv/Utv Oil change Kits:
www.amsoil.com...
Amsoil Atv-Utv Oil Lineup:
www.amsoil.com...
Amsoil Brake and Parts Cleaner:
www.amsoil.com...
Flexible Pour Spout:
www.amsoil.com...
Nozzle Dispenser Caps:
www.amsoil.com...
Merch shop---- shop.spreadshi...
Facebook ---- / torrentperformance
Instagram ---- / torrentperformance
RU-vid ---- / torrentperformance
Amsoil ---- www.amsoil.com...
Save up to 25% off your purchase and Free Shipping on $100 purchase by signing up as a Amsoil Preferred Customer (Dealer Number 5541460) when checking out.
www.amsoil.com/...
Amsoil will send you a free catalog in the mail just click the link and fill in the information in the forms from the link and receive a free catalog in the mail. Any purchase go directly to me with link.
www.amsoil.com...
Amsoil Limited Warranty Bulletins:
www.amsoil.com...
Amsoil Vehicle Lookup links below, if you purchase from these links I will get a small commission to help me keep mototrcycles in the garage.
Amsoil Auto & Light Truck Lookup:
www.amsoil.com...
Amsoil Motorcycle Lookup:
www.amsoil.com...
Amsoil Atv Lookup:
www.amsoil.com...
Amsoil UTV Lookup:
www.amsoil.com...
Amsoil Snowmobile Lookup:
www.amsoil.com...
Amsoil Outboard Lookup:
www.amsoil.com...
Amsoil Personal Watercraft Lookup:
www.amsoil.com...
Amsoil Heavy Duty Truck Semi Lookup:
www.amsoil.com...
Amsoil Links for All Amsoil Products below, please take a look you might find something you need for any equipment that you might have.
Amsoil Motor Oil Link For All Motor Oils:
www.amsoil.com...
Amsoil Hydraulic Oil Link:
www.amsoil.com...
Amsoil Compressor Oil Link:
www.amsoil.com...
Amsoil Fuel Additvies Link:
www.amsoil.com...
Amsoil Transmission Fluid Link:
www.amsoil.com...
Amsoil Gear Lube Link:
www.amsoil.com...
Amsoil Grease Links:
www.amsoil.com...
Amsoil Filters And Bypass Systems Link:
www.amsoil.com...
Amsoil Brake Fluid Link:
www.amsoil.com...
Amsoil Suspension Fluid Link:
www.amsoil.com...
Amsoil AntiFreeze Link:
www.amsoil.com...
Amsoil Dealer And Preferred Customer Link:
www.amsoil.com...

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@IAMCountry2010 3 года назад

Great video!! I just changed the oil, oil filter and removed the crankcase nut, draining the crankcase. This helped to avoid ‘priming the line’ which I wanted to avoid. This is great as I did it myself. If I had to prime the line, I would’ve taken it to a shop - which I’m glad I didn’t have to do!! Thank you!!

@pattywaktdiy4175 Год назад

Thanks for the video. You got a like from me for the help. But I will say, the music made this harder to watch than was necessary.

@going300mph 5 лет назад

Great Job, the quad is running nice and strong. That snake oil you put in there is nice and slick! Hopefully it will clean out some of the built up carbon from the years of abuse I put this thing through. Thanks again Michael, I'll recommend you to all my friends! Wait a second, I don't really have that many friends! Well shoot, guess I need to work on building up my youtube channel better so people can remember how cool I am! Ha ha, time to edit some videos...

@brianduff4278 3 года назад

Great video easy to understand. Thanks

@bonedog169 3 года назад

I pull the hose with the screen the first time I changed the oil in a hand me down, the thing was CAKED in sludge, not certain how oil was even circulating. If you've never done it, may need to give it a look. Used the closed end of a box wrench to go around the brass fitting, helped with the torque as some of them are on pretty tight.

@chevellecarcass Год назад

I have a 2010, same bike, same color, my starter does exact same thing, stays engaged a couple seconds after the bike is started.

@northernale1 2 года назад

Never ever use a tool to tighten a oil filter!! The general rule of thumb is that oil filters should be hand tight, plus an additional quarter turn. This will ensure that the filter is secure, but not too tight. Over-tightening can cause damage to the filter ..... also pour some oil into the filter before installing helps on startup after a oil change

@terrykern7399 2 года назад

Good video

@frankgiglio6761 Год назад

Do I have to prime if I just change the oil i And the filter?

@jdawgl9989 3 года назад

Looks like your pinching off the oil return line. It needs to be the one running to your air box with the slit in the line.

@TorrentPerformance 3 года назад

pull the strainer on the oil tank pinch the air line with the slit to airbox correct.

@johnkillen588 4 года назад

tHANK YOU

@notagain8661 4 года назад

I just did an oil change on a new to me 2009 Sportsman 500 HO and there was no way in hell that I could get a socket on the motor oil drain plug with the drive shaft in the way-No way! I got it off with a wrench in the bottom hole but the only way I could get the plug back in was to cut off a 14mm wench to try and get it back in the hole and threaded. It was a total nightmare! Not sure why the driveshaft on my was right in front of the plug. Only 293 miles on the rig!

@TorrentPerformance 4 года назад

Ive done a few of these before. After you do it a few times youll get it.

@briankennedy5578 4 года назад

Mine is same way. One of the stupidest things I've ever seen. And I've seen alot. Add to it I'm doing mine outside at 17 degrees Fahrenheit. Wiped camshaft and need to get some more firewood. So can't wait till it gets warmer. Was looking to see if someone had a trick while my fingers thaw a bit. Guess not.

@g2westwood 4 года назад

@@briankennedy5578 The trick I use to remove the crankcase oil without needing to even touch that bolt is to drain the oil from the reservoir , remove the oil filter , then with the oil filter off and the drain bolt from the reservoir off start the engine and idle it for 5 seconds. While it's idling the oil from the crankcase will drain out of the reservoir . Only use this trick if you ran the motor beforehand to warm up the oil. Some people will scream don't start the engine without oil. The engine is still oiled enough to idle it for a few seconds . I do it every oil change , never had an issue and saves so much time and effort getting at that bolt on the crankcase.

@Jeff-rh8mq 4 года назад

thanks for a great video....im gonna do a change with amsoil this weekend on my 05 500[its been done before] for the first time myself. you explained everything but I will not do the screen filter and prime as I don't want to f#$$@^ it up.....thanks for a great tutorial!

@TorrentPerformance 4 года назад

Thanks Jeff!!!!! hope you use my links for the amsoil to help me out

@Jeff-rh8mq 4 года назад

@@TorrentPerformance count on it..... i want to be clear if i can ask you a ?...there is 2 drain plugs without removing the screen plug?

@TorrentPerformance 4 года назад

One on oil tank, one on engine dont remove screen. Just follow video the way I did you'll be fine

@Jeff-rh8mq 4 года назад

@@TorrentPerformance sounds great! thank you again!

@Cephous67 4 года назад

TorrentPerformance where is that crankcase drain plug? Couldn’t find it last week.

@Maga4Lyfe 5 лет назад

Just a heads up my wifes sounds exactly the same when it starts. Thats a polaris for ya. Thanks again..

@toutubesfriend 4 года назад

Same here

@205bamaboy94 4 года назад

The filter right about the oil filter , where does that line go to?

@Kmecha84 5 лет назад

Good video! I have an 08 sportsman X2 500 ho and gonna change the oil soon. Do you still recommend the 5wx50 weight oil? Mainly summer use

@TorrentPerformance 5 лет назад

Yes I do. Amsoil sells the kits with included oil filter for that model. I have a 2008 video coming soon being edited now, but it is the same as the 2012 for the oil change. If your gonna run amsoil for engine oil I suggest doing the tranny and front diff as well at that time. Those 2008 vids are being edited now. And when you order use my dealer number 5541460 if these vids helped. The 2008 sportsman videos will be up in the future keep a eye out for them.

@justinlott1477 5 лет назад

My sportsman 500ho sounds the same at startup as well

@aubrock2007 4 года назад

mine too. Bought it used with less than 500 miles. 2008 model but it has been super reliable for the last year!

@stevelewis9677 4 года назад

That’s how the all sound. You change the bendix it’ll be quiet. But not for long. One maybe two rides Ian’s noise is back

@bagger2013jm Год назад

@@stevelewis9677 , change the bendix on my 2004 400 with 499 miles. Actually was even worse. Threw in the original one.

@richwilcox9564 4 года назад

Background music SUCKS, not needed, to much jibber jabber in the beginning. Just the facts, only the facts!

@lbello4546 3 года назад

Hello! Do you know where is the engine serial number STAMPED? (No sitcker). I have to sell my atv and it's a requirement. Thanks a lot!

@TorrentPerformance 3 года назад

no sorry cant help

@Nate-fs3no 4 года назад

These oil tanks are real prone to being over torqued and stripping out. So watch me give the bolt five ugga duggas and really reef it in there. Lol.

@justinleach8025 4 года назад

Just did this on an 04 500 and the line exploded after about 3 seconds of idle. I had just finished a top end rebuild and pumped oil in with the flywheel to lubricate before the first start. I failed to realize I added pressure to the lines before clamping.

@TorrentPerformance 4 года назад

Well this video was for a oil change not rebuild. You need to follow rebuild instructions for a rebuild.

@justinleach8025 4 года назад

@@TorrentPerformance I know lol. It was my own ignorance. Just sharing my experience in case someone finds thereself in my situation.

@TorrentPerformance 4 года назад

@@justinleach8025 yeah if you preprimed it makes sense. I'd replace that line of you can.

@steveb1942 4 года назад

i have a 2005 sportsman and i wanted to change the oil, your video is on point until you prime the oil system you are pinching off the return line for the oil, the breather hose is on top of the oil tank and has a slit in the hose about 1/2 from the tank, I looked forever how to do this and there is no one on here that shows the corrected way or they just show the four wheel running after the oil pump was prime please look in to it just want to say ur other video are awesome

@TorrentPerformance 4 года назад

Steve that the correct line to pinch. It has a small slit on it. You will feel it build pressure immediately when you pinch it past the slit in the line to build the pressure to prime. Thanks for the comment