Polishing & Buffing Pads - Choosing The Correct Polishing Pad - Chemical Guys CAR CARE

Подписаться 909 тыс.

Просмотров 1,7 млн

50% 1

►NEW UPDATED VIDEO:
• Video
Hex-Logic Polishing / Buffing Pads:
bit.ly/3N26Nqo
Engineered, developed and tested to specific requirements of our OEM clients. These pads utilize the best foams from around the world and the latest of testing and research and development including Chemical Guys own Self Centered backing system!
The Hexagon is not new to science, it's just new to detailing. Rather then try to reinvent some catchy gimmick, Chemical Guys invests in technology that through the years has simply been unbeatable and improves on it. Hex-Logic pads are designed to hold product and distribute it evenly over the surface of the pad, delivering a superior even finish that is hard to achieve with any other pad.
Nature selected the Hexagon for storage and designed it to be one of the most efficient holding cells. For example a mass of hexagonal wax cells built by honey bees in their nests to store honey and pollen. The bees build the comb with 6 sides for even distribution of product fast and effectively.
#chemicalguys #detailing #carwash

Авто/Мото

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 586

@ChemicalGuys Год назад

Choose the Right Pad for the Job! - Hex-Logic Polishing Pads: bit.ly/3N2ze7O

@trumanhw Год назад

You guys should think of providing amazon links to each product by both color & time ...

@thomasmatthew7759 7 лет назад

TLDR compound + polish combos (descending order of aggressiveness): Cut: Orange Hex: V32, V34, V36 Green Hex: V36, V38 Finish: White Hex: V38, P40 Blue Hex: glazes (Blacklight, EZ Creme, etc) Black Hex: wax (Carnuba Creme, Butter Wet Wax, etc) Red Hex: sealants (Jet Seal, Top Coat, etc)

@TheCincyViking 7 лет назад

Thanks!!!

@lowriderfever 5 лет назад

Would orange be used with rubbing compound?

@lumpyrex007 5 лет назад

what about yellow. WHAT ABOUT YELOOWWWWW!?

@crazybicboy 5 лет назад

@@lumpyrex007 yellow is the heaviest cutting pad like if your paint has scratches that are deep and you cant get them out with the orange

@streetboyz1096 5 лет назад

If polishing is used to bring out shine and remove scratches, and there are harder pads that u can use, why do u use “compound”? Also... is green and orange pads for compounding and the ones on the bottom for polishing?

@jhchapman5150 10 лет назад

9:25 LOL "Now you know which pad DO'S WUTCH!" Very informative!

@adamyoung9777 7 лет назад

jhchapman5150 lmfao

@TheRzarectah 7 лет назад

im cryin

@enthusiastsigaming8426 3 года назад

bro that had me rolling

@bubbie3533 3 дня назад

Very clean

@STVLK3R 10 лет назад

Please balance your volume. Good stuff though, love the video.

@saintsyoun 6 лет назад

Well explain thank u..pink for cutting removing swirl mark and scratches, White for polishing Black for waxing and Red for coating

@ChemicalGuys 6 лет назад

Hi! Check out the chart below to see all the color pads and their uses. It's a really useful thing to have around the garage. Thanks for watching and make sure to check back tomorrow for a new video upload! www.chemicalguys.com/v/vspfiles/assets/images/HexLogicPolishingPadChart.jpg

@MrBobbystu 6 лет назад

Chemical Guys so is this universal?

@ChemicalGuys 11 лет назад

Every Paintwork is Unique. Even in a specific manufacturer, the paint can differ from model to model. Every paintwork requires a "Test Spot" to ensure you have a proper combination. I would recommend to start with V36 and an orange pad as a baseline then adjust the pad or polish accordingly to achieve the desired results. -Greg@CG

@NightNDay2.0 2 года назад

Great vid I wish I can see the vid for each one of them

@fircombehall7495 7 лет назад

Very comprehensive explanation of the various types of pad. Thank you.Ps: Ignore those who accuse you of "stalling and repeating". Sadly, these days, many people have the attention span of a gnat.

@TheEgg185 6 лет назад

Yeah. They have no patience. I wonder what they're like in the bedroom.

@fircombehall7495 6 лет назад

Very 'handy'.

@leocrossfield 5 лет назад

I agree - good call.

@RyanCheek 11 лет назад

Thank you guys so much! I have all the hex logic pads, but I've been using them wrong and getting frustrated. This video has shown me exactly which pad I should be using. Thanks again for taking the time to make the video. Reminds me, I need to order a few new pads!

@ChemicalGuys 11 лет назад

Try using less polish. It seems like maybe you are using a little too much. You should only use 5 small dots for each section. You can always add more polish to the pad if you didnt add enough but it is much more difficult to remove polish. Once your pad gets saturate with "spent" polish, you need to clean the pad using a pad cleaning brush or a Pad Washer. I personally prefer the Pad Washer because its gets the pads VERY clean with little effort. -Greg@CG.

@flyurway 9 лет назад

So is this same color coding an industry wide standard?

@coreybenson3122 8 лет назад

in general, yes. But always double check.

@bryanr.3241 2 месяца назад

After watching several videos on pads , I’m thinking of just staying with hand waxing. Too intimidating . Twice a year I clay bar , then use white lightning and jet seal by hand. I think I’m returning the buffer/polisher I just got today.

@johnw7018 9 лет назад

Is there like a diagram I can print out

@craigs.8231 7 лет назад

Yes there is and all their training can be found here - www.chemicalguys.com/HOW_TO_ARTICLES_s/338.htm

@gquinonesjr3881 6 лет назад

Than You. Enjoyed this because I learned something important about the quality, selection to use the right pads for the right resulting in an excellent car polish job. Using the right pad is important as you do not want the incorrectly use a pad not suitable for a particular and demanding job and ruin a car's paint worth several thousands of dollars. Its illuminating and enjoyed it very much.

@Velo1010 Год назад

The term “cutting” always confuses me, but I assume that means removing part of the clear coat?

@ChemicalGuys Год назад

That's correct!

@halnewell2007 6 лет назад

I Keep seeing all these different color pads (with no continuity between different manufacturers) and no one answers the basic question: Are the pads abrasive-infused with different size grits or are the pads simply different durometers / stiffness?

@ChemicalGuys 6 лет назад

Hi Hal, this is a trifling question indeed, I actually found a really detailed article on the subject that I think will answer many of your questions, and it will teach me a thing or too about pads as well. The simple answer is the stiffness of the pad and the density of the foam, however I'll take a seat back and allow the article to more accurately describe what's actually happening. www.ereplacementparts.com/article/2663/Abrasives_Polishing_Pads.html C.G. Alex -

@DevonWayne 4 года назад

I was wondering if I was using my microfiber correctly. Glad I'm using for final polish. I thought it was maybe cutting like wool. Turns out I need wool for an agro cutting pad. My pads are cheaper and different via Amazon, but this was helpful. I definitely see the value in chem guys pads also, which might make me purchase in future once I learn basics with my vehicles

@Bobster986 5 лет назад

I have a 1986 classic car 🚗 with original paint. It sat in a garage for a number of years before I bought it and the owner told me something must have dripped on the top of the car while it was storage. It looks almost like water stains, but it’s not. A friend came by with his D.A. polisher, but it only removed the haze in the finish, the marks or swirls still remain. Anything you can suggest would be greatly appreciated as I would really like to save the paint as the car 33 years old and all original. Thanks in advance!

@ChemicalGuys 5 лет назад

Hey there! That's awesome, what kind of car is it? You probably need a more aggressive combination of pad and compound/polish. An Orange Hex-Logic Pad with V36 Cutting Polish is a good starting point. Check out this video! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jl20YA-ZpWE.html

@markmarquez5431 4 года назад

Are those color coding standard across different brands or just for chemical guys? And for foam or microfiber, which is better for new honda? Thanks!

@ChemicalGuys 4 года назад

These would be within the Hex-Logic pads. Colors may vary depending on brand. For newer paint, we recommend using a foam pad.

@markmarquez5431 4 года назад

Thanks!

@DeltaKilo77 5 лет назад

I couldn't really find anywhere that explained what each pad did. Thank you for the video now I know which pads to buy.

@ChemicalGuys 5 лет назад

Hi Derek! Thanks for the awesome feedback, we are glad that you liked our Polishing and Buffing video. Happy detailing!

@evilmontezuma87 11 лет назад

Thank will do! I apply 50/50 by hand but I am new to the Carnuba and Liquid Carnuba....

@ThreeTonDinobot 11 лет назад

Great vid. Thanks for the explanation. It's nice to see the breakdown on all the pads. Thanks again!

@-gomez1723 4 года назад

Are the pad color coding universal? Or is it simply for your company? As in red lads are the softest, yellow the heavy cutting pads, white are polishing pads for all pads...so on and so forth

@daltonschannel8405 3 года назад

I'm a big Chemical guy fan here. Their products, along with the videos have educated me a good bit and I'm thankful for that so Cheer's!!

@ChemicalGuys 3 года назад

Thanks for the amazing feedback!

@mikeomax8101 3 года назад

which one would you recommend for heavy oxidation on boat gelcoat ?

@ChemicalGuys 3 года назад

Hey Mike! Polishing with a Yellow or Orange Hex-Logic Pad with a compound works well for removing heavy oxidation.

@danlichok 9 лет назад

How to I know whether my paint is (Hard, medium, soft or something)? I did a ground up restoration on a 1988 Alfa Spider, but I'm not sure of the paint.

@baderalmoayed9418 4 года назад

Hi guys, which pad to use for removing light scratches and swerls on 2014 honda accord. Thanks

@ChemicalGuys 4 года назад

You can use an Orange Hex-Logic Cutting Pad to remove light scratches and swirls from your paint and then follow it up with a White Hex-Logic Polishing pad with a finer polish to refine the paint and bring out the deep luster of the paint.

@evilmontezuma87 11 лет назад

What pad would you use to apply butter wet wax or carnuba wax or liquid carnuba?

@ricktheruler1665 2 года назад

The black one .

@krisswolf2011 Год назад

Or red

@Mrmorett 9 лет назад

Hi, I really don't understand at full about Paint types (Hard, medium, soft or something). So what paint type would my Audi A3 2010 would be? it's a dark grey, almost black. Besides, what type of pad should I use for cutting / polishing / finishing) thanks

@RetoxMedia 5 лет назад

Thanks for explaining the wool pad.

@ChemicalGuys 5 лет назад

Happy detailing!

@xav3ng3rx 11 лет назад

What if I use the black pad for a finishing polish like Menzerna SF4500? It would still have the amount of cut the polish offers right? And if I jump up to a white pad with the same polish, this just offers more cut?

@sccarguy 5 лет назад

I bought your Vss one step to use on my Vette .which pad would you recommend and how many pads will I need. (First time using da) Thanks

@x2eXu50x 11 лет назад

Does the green have any cut at all? Could i substitute the orange for the green if i have soft paint?

@02011982 8 лет назад

So green pad is designed for Mercedes Benz since paint/clear coat is hard and then its good for Suburu since they have soft paint/clear?

@Future_Trunks94 7 лет назад

Im looking to do a one step with the VSS. So orange would be my best bet? light to medium scratches

@ChemicalGuys 7 лет назад

Thanks for checking out the video! I've included a link to the hex pad page of our site which outlines all the uses for the different polishing pads, I've also included a description of the orange pad which would be the best choice for you based on the amount of scratches and swirls in your car's paint. Orange Medium-Heavy Cutting Pad-This firm, high density foam is ideal for scratch and defect removal. The orange foam offers the correction of a typical compounding pad while at the same time allowing the polishing ability of light cut foam pad. When used with heavier compounds it will remove moderate swirls and scratches with little or no haze. Its an all around pad that will work on most light to moderate imperfections. www.chemicalguys.com/Hex_Logic_7_5_Buffing_Pad_Kit_p/buf_hexkits_9da.htm

@Mariocassie1956 Год назад

What do you use to buff out a car with decals and pinstripes

@jonvillasenor3385 8 лет назад

Can I jump straight from a yellow to white pad or do I need to use an orange one? Will be using on a c6 Corvette

@geralddombrowski7316 10 лет назад

what type of pad would be good for 2003 chevy cavalier fresh painted 1 week ago,and what would be good to bring back faded paint on a 1973 vw super beetle....

@willsfire 2 года назад

you should put a description/foam type on the back of the pad

@ChemicalGuys 2 года назад

Thanks so much for your suggestion!

@theeabster1983 6 лет назад

Is there such thing as a list as far as names of cars that have harder paint and softer paint like you mention F-150 Corvette has a hard paint how about a Honda or GM product. How would you go about finding out if it's hard or soft paint on the vehicle you're working on?

@AaronMattheus 8 лет назад

I have the orange pad for compounding and I dislike it so much. It's so hard/stiff it wont bend, so when you compound cars with many concaves with it it wont fold into the concaves. I also use the white pad for polishing and black one for applying sealants/waxes but I like these last two, just dislike the orange pad, think it's too stiff.

@mareksumguy1887 8 лет назад

+Amateur Detailing Its all bullshit gimmick man. Just choose the pad that has the softness and flexibility that you need... and then just overlay the pad with a microfibre towel or something. So you're just using the foam pad as a backing. I overlay my foam pad with a nice soft, thick, high thread count t-shirt.

@danlc95 9 месяцев назад

Try the green.

@boris9331 8 лет назад

HI. The issue is in 4" I can not get a Blue pad (finest polishing one). It does come with a black pad however. Can this pad still work with polishing as I imagine it's the polish that's doing the work even if it's on a soft pad?

@Rockin_Roll 7 лет назад

are the different color(s) pads universal as to their application....with all manufacturers....ie, EVERY ones black pads are for polishing......and everybody's orange pad is more for cutting......

@ChemicalGuys 7 лет назад

Hey Justin, thanks for checking out the video. The coloring system is unique to us, you might find some similarities in other brands, some manufacturers copy one another, and sometimes it's coincidental. I think our pads are colored based on how dense they are.

@Rockin_Roll 7 лет назад

great....thanks.

@NickM1013 7 лет назад

Very informative, thank you. Can you point me to a video that demonstrates what stage to either clean, replace, or disgard the pads?

@ChemicalGuys 7 лет назад

We have two other videos showing you how to clean your polishing and buffing pads. Check it out! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-B9lED1PPuLY.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4vfvP1Z2R4U.html

@saumilpatel1185 8 лет назад

Need advice on what pads to use for a 15 WRX with very minor defects. I've got V36+V38 and a HF DA with a CG 5" backing plate on. I know that subaru paint is relatively soft...my goal is to polish-seal-wax.. My lineup: 5" CG Backing Plate V36 V38 Jetseal CG Butter Wet Wax

@PepegaPig 11 лет назад

Green is a more aggressive pad than the white one. White is a light polishing pad and green is a heavy polishing

@raygodbout 2 года назад

Foam color chart for dummies (beginers) Thanks, the video was helpful!

@ChemicalGuys 2 года назад

Glad it was helpful!

@TheMrBennito Год назад

So for heavily oxidated spots, grey areas (on roof), start out with orange? Or yellow 🤔

@ChemicalGuys Год назад

Hey! Test in a small inconspicuous area to determine the correct combination of pad and chemical.

@williamdelapena1121 3 года назад

Which pad is for butter wax?

@ChemicalGuys 3 года назад

Hi! Use a Black Hex-Logic Pad to spread a fine coat of glaze, sealant and wax.

@mikebmike1999 8 лет назад

Any Tips for polishing my 2010 BMW F800GS windscreen? Weathered with light scratches from all the off-road riding and dirty water drying on it.Mike.

@sunrisesurfbum 7 лет назад

Tip: turn on the "approve comments" default button in your RU-vid Creator Studio account and simply don't approve the troll comments. It's your channel, you don't have to allow any comments you don't like.

@zerozab2985 Год назад

If I use the green, light cutting pad on a DA polisher to remove light swirl marks, how many clean pads should I use for the entire car?

@ChemicalGuys Год назад

Hey! It is normal to have two of the same pads or to clean the pad during the job.

@Rubensteezy 8 лет назад

Hey guys, Love the videos! I just got myself a Porter Cable DA, and I'm excited to get started detailing! I'm currently working on a 2001 Subaru, and the Orange, Green then White is working really well! But I'm moving onto a 2013 Hyundai Veloster, and its simply just swirls and mildew. I don't know which cutting pad to select, as this paint is thinner than the subie and from my knowledge a soft paint and I don't want to cut too much out/cut down to paint. Have any tips or recommendations?

@soundlesssundew Год назад

Did you figure it out?

@aaronfuksa2047 4 года назад

Headlghts...wool or orange pad for cutting? For v34, usually v36.

@ChemicalGuys 4 года назад

Hi Aaron! Use an Orange Foam Pad to restore headlights.

@Sp00kyMaciaz 2 года назад

So I can use the orange pad for my black light, the white one for jet seal and the black one for butter wax ?

@ChemicalGuys 2 года назад

Hi! Use the Orange Hex-Logic Pad for compound/polish and the White Hex-Logic for final or light polish. The Black Hex-Logic Pad can be used to apply glaze, sealant and/or wax.

@jrc123ful 9 дней назад

Remove thick haze for plastic head lights

@danielm4167 4 года назад

What kind of pad would you use for a fiberglass rv with a gel coat? I’ve heard wool is best

@stepfour 8 лет назад

After using a paint correction product is it correct to then apply sealant and then finishing wax... ?

@soxredsox 9 лет назад

so would an orange pad be bad for a benz c300 black? green only? with cutting compound?

@richardadams2087 10 лет назад

help.. I have an 07 C6 Corvette with black paint. what pads do you recommend? I don't have swirl marks. I am going to clay the car and then proceed from there.

@2010stoof 6 лет назад

So my DA kit came with orange, white, and black. He said red is for sealant... So I can't apply sealant with the black? But I can apply wax with the black.... Seems confusing

@ChemicalGuys 6 лет назад

Hi! You can use the red or the black pad to apply sealant. Both pads don't have any cut, so you are totally safe to use either! Check out the pad chart below for further details. Thanks for watching and make sure to check back later today for a new video upload! www.chemicalguys.com/v/vspfiles/assets/images/HexLogicPolishingPadChart.jpg

@MrEyad1990 9 лет назад

so, hard pads for buffing and softer pads for waxing and polishing ?

@ChemicalGuys 9 лет назад

eyad aljamal Yes! Stiffer pads make more resistance, friction, heat, and therefore cutting ability. Softer pads make less resistance and heat, so they do not cut. Soft pads are perfect for spreading glaze, sealant, and wax.

@MrEyad1990 9 лет назад

and what product should i use with harder stiffer pads ?

@ShainAndrews 6 лет назад

3M™ Perfect-It™ Rubbing Compound

@nonplayablecharacter006 6 лет назад

Eyad Jam l

@ellitestar 6 лет назад

compounds for removing scratches

@kuma1384 4 года назад

Do orange pad can be used for removing small scratches on windshield?

@Sleepy731 6 лет назад

When your talking about knocking paint off, are you talking anout about clear coat?

@ChemicalGuys 6 лет назад

Hey there sleepy, thanks for watching. When polishing, you're removing clear coat to expose fresh unscratched paint. Remember that you can only polish clear coat 1-2 times a year because clear coat is very thin. After polishing, you must apply waxes and sealants to prevent premature oxidation because the clear coat acts as U.V. protection for the actual base coat. Hope that clears everything up. C.G. Alex -

@arseniobenkhoucha4676 9 лет назад

is my first time doing polish on my 2008 white f250 the paint show small particle of rust. what pad should i use and what product should i apply

@1gnxregal1 9 лет назад

what type of pad should I use to remove overspray paint. neighbor was painting his home.

@gladstonewilliams4167 3 года назад

What kind pad is good to us for a G6 Pontiac 2008 ? Thank you

@ChemicalGuys 3 года назад

Hey there! Start with an Orange Hex-Logic Pad with your choice of polish.

@TimBowen-sh6pe 4 месяца назад

Those pads look like they were sized by a guy who drives a lifted truck with 40" tires 😂 No, but seriously. Thank you for the product knowledge!

@davebl9645 Год назад

Brand new BMW and i am wanting t o apply a ceramic seal with my Dual action machine, l am thinking a micro fibre pad or should l use a black foam? Should l clay bar first?

@winston-1111 5 лет назад

Thanks! exactly the explanation I was looking for

@ChemicalGuys 5 лет назад

Happy detailing!!

@ddg2624 4 года назад

Does the coloring on the pads mean the same things across the whole industry or just for these specific ones

@ChemicalGuys 4 года назад

Hey! We recommend checking the link down below to see what pad does what. Thanks for watching! www.chemicalguys.com/blogarticle?cid=blog-article-hex-logic-pad-color-code

@animeXL 11 лет назад

Just what I was looking for, as a beginner this is invaluable. Thanks Greg!!!

@brillantiknowitsmisspelled6094 7 лет назад

I bought a 3M scratch repair kit with a note to visit a before and after HOW-TO-Video. It's nowhere to be found. All the other crap are not compatible with my purchase. I got screwed.

@emmanuelruiz7308 Год назад

Question from your experience what kind of pad does Toyota paint respond to well ?

@MrBritrider 2 года назад

How do these pads stick to the base pad? I have a 5” air driven orbital sander with hook and loop base pad. Can I use it with these pads and will it buff out a hand wax job? How many pads will I need to apply wax and buff out wax?

@ChemicalGuys 2 года назад

Hi there! The Hex-Logic Pad also uses a hook and loop backing to attach to the corresponding backing plate. Wax can be applied with one finishing pad such as the Black Hex-Logic Pad and buffed off with a clean microfiber towel.

@sinuemedina2550 5 лет назад

I need 2 pads. One to removes fine little swirls. Another one to apply ceramic sealer and make it shine.. I owen a 18 black silverado. Any suggestions on what pads to use for black paint

@interiormotivescom 10 лет назад

What would you recommend on a 2000 explorer pearl white finish. Thanks

@rahiee 9 лет назад

what color pads should i use for BMW e39 M5 paint? what compounds should i use? thanks

@renelwllms 8 лет назад

hi the video is perfect for the beginners who wants to get their cars polished.question: I have a bmw x5 2008, does it have a hard paint or soft paint?

@mchaves7663 3 года назад

what pad do you recommend to remove oxidation from pvc clears (boat enclosures)?

@ChemicalGuys 3 года назад

Hey there! Try using an Orange Hex-Logic Pad to remove oxidation.

@wiredawg2005 7 лет назад

How do one determine the type of paint (hard/soft)?

@ChemicalGuys 7 лет назад

Hey John, thanks for watching. The best way to discover if your paint is hard or soft is by trial and error. You can also check the internet to determine what kind of paint you're working with. You'll find out what kind of paint you're working with when you start polishing, start with V36 and an orange pad, if that's not working you would move onto V34 and V32 with a yellow pad which is the most aggressive pad. If all these options don't produce the desired results, than you're dealing with hard paint. Hard paint needs to be corrected with either a microfiber pad which has replaced the wool pad over the years, or a rotary polisher that generates more heat and friction which doubles its ability to remove clear coat. You always want to start with the least aggressive approach before you jump head first into the most abrasive compound. The last thing you want to do is remove more clear coat than you absolutely have to. C.G. Alex -

@peepeesmelly1 4 года назад

Just picked up the torq10fx and a bunch of other pads ... My truck has some micro swirl and small scratches .. I also picked up the v34 compound as well as extra pads .. what would be the best way to get it done ??

@ChemicalGuys 4 года назад

Hi Stephen! Test your combination of pad and chemical in a small inconspicuous area to determine if the you need more or less abrasives. Orange Hex-Logic is a good pad to start with.

@Jason-wg3ld 6 лет назад

My order of blacklight car wash and glaze arrived yesterday. I'm going to get the harbor freight polisher today. I plan on washing the truck claying it putting the blacklight glaze on then using the wet butter wax. Can I use just the orange white and black pads for that whole process? Or would it be better for me to purchase the blue pad for the glaze? I'm new to this so any information will help.

@ChemicalGuys 6 лет назад

Hey Jason, sounds like you have a great plan of action! Yes, you can use the orange and white pads for the polishing process, then use the black pad for the glaze and wax. Check out the link below for more information and tips to use while polishing! Thanks for watching Jason and happy detailing! www.chemicalguys.com/How_To_Choose_The_Right_Compound_Or_Polish_For_Your_Car_s/644.htm www.chemicalguys.com/v/vspfiles/assets/images/HexLogicPolishingPadChart.jpg

@charliesmith9528 2 года назад

I have a 06 cadillac dts ,,,black paint job that needs attention,,light scratches and marks,,overall good condition..should i use a gray bar to clean the car before any cutting and buffing,,,

@ChemicalGuys 2 года назад

Hi Charlie! Absolutely, the Medium Duty Clay Bar is a great choice for prepping the vehicle for paint correction.

@ZeNKuN Год назад

great explanation, thanks a lot, I just bought a new car and it does not have many swirls, still I want to correct the most as possible before coating, sadly in my garage I can't use my polish machine, but since it does not have many deep swirls I will do it by hand. which pad would you recommend me to do this job? thanks in advance.

@johnsullivan7599 6 лет назад

I have a 2010 black Lexus does this car have soft or hard paint

@ChemicalGuys 6 лет назад

Hi John, in general, Japanese cars have softer paint, however, these generalizations are a rule of thumb. There are always exceptions, for example if your car has been resprayed. We always recommend starting with a 2x2' test spot first before polishing your entire car to figure out what kind of paint you have and what products will work best for your particular car. Start with V36 and an orange pad and then make changes depending on the results you achieve. I will leave a link below that explains the exact steps to take to figure out the best combination of pad and product to get your car looking new again! Thanks for watching, John, and check back later today for a new video drop! www.chemicalguys.com/How_To_Choose_The_Right_Compound_Or_Polish_For_Your_Car_s/644.htm

@86turbot 6 лет назад

The pads are one thing... the compounds and polishes are another... what is v 36 or v38???? Pair them with the correct polish to be more exact... good video but confusing at the same time...

@ChemicalGuys 6 лет назад

Hi Julio, thanks for stopping by. V36 is an optical grade cutting polish and V38 is an ultra refined final polish, whereas V32 and V34 are compounds. In terms of cut, the products from most aggressive to least go like this: V32, V34, V34, V36. I'm going to leave links to a video that explains the V Line and also to a helpful article that explains which chemical and pad to use when. Thank for watching, Julio, and stay tuned for a new video launching tomorrow! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HrUmQ6uLSPI.html www.chemicalguys.com/How_To_Choose_The_Right_Compound_Or_Polish_For_Your_Car_s/644.htm

@TheGonz03 6 лет назад

Great video. Horrible sound

@connieroldan623 8 лет назад

i have an old 76 vw beetle bug and on the top of my car it is getting white spots how do i remove it want to restore it for my dad

@Mr330d 6 лет назад

If i have a backplate just short of 6" what size pads should i purchase it came with a 7" pad which is redicously big for my vehicle do i go for 4" 5" or 6" ?? Many thanks for any answers

@ChemicalGuys 6 лет назад

Hi! Great question. We have found 5.5" pads to be the perfect size that strikes the balance of coverage and focused cutting power. In fact, all of our polishers ship with 5" backing plates and 5.5" pads! Thanks for watching and make sure to check back later today for a new video upload!

@rafaelrosas2918 6 лет назад

There is a way to remove orange perl without sanding just with compound?

@ChemicalGuys 6 лет назад

Hi Rafael, good question. Orange peel is going to require wet sanding- there really isn't a way to remove it with just compound. Thanks for watching and make sure to check back tomorrow for a new video upload!

@Luis-uj2jy 6 лет назад

Which would I use for my challenger. I did the mistake of taking it through quick car wash. Which pad and polish should I use. Car paint is only 4 years

@ChemicalGuys 6 лет назад

Hey Luis that depends if you're looking to do a one step polish or a multiple stage correction. I think you can achieve a more accurate and precise correction when you do a multistage correction. In case you're not familiar, single stage polishes are like an all-in-one for light to moderate swirls. If you are looking for a comprehensive treatment, go with a two stage correction. Here's a suggestion. Start with V36 with an orange pad and see if the desired results are achieved. Depending on the severity of the scratches and swirls on your paint, you may need to use a more aggressive compound. Finish off with V38 and a white pad to remove the marring marks created by the abrasive pad. Don't forget to top off with glaze, sealant, and wax for the ultimate protection. Feel free to send us pictures of the before and after, we would love to see them! C.G. Alex-

@thelittleredbarn174 4 года назад

I'm in the process of polishing a 1946 Teardrop trailer that's made out of aircraft aluminum that has oxidized, and I've done one side of the trailer by using Blue Magic metal cleaner which came out okay but was a lot of work I'm not going to try with pads on side but was wondering which pad I should use to apply the Blue Magic metal cleaner with? The wool pad or one of the foam pads? Thanks for any help you can give .

@ChemicalGuys 4 года назад

Hi there! Using a microfiber pad will easily cut through oxidation and stains using metal polish.

@abdulbeany1894 2 месяца назад

Hi can the foam pads be used as hand applicators . Can i use the pads by hand or are they for machine only thanks

@markokosir5407 6 лет назад

Hey I am going to buy one step polish (polish+finish+protection, Menzerna 3 in 1). So is it better for me to buy the green pad or the white pad because I want to have a nice shiny finish and protection film created after polishing.

@ChemicalGuys 6 лет назад

Hey Marko, the green pad is definitely more aggressive and is considered a heavy polishing pad. The white pad is less aggressive with less cut and is considered a medium-light polishing pad. The pad you use will depend on the condition of your paint and the recommendations of the polish you are using. Check out the chart below to see all the color pads and what they do. When detailers use our premium one step polishes such as VSS, we recommend the green pad for medium scratches and swirls and the white pad for light scratches and swirls. Thanks for watching, Marko, and stay tuned for a new video dropping later today! www.chemicalguys.com/v/vspfiles/assets/images/HexLogicPolishingPadChart.jpg

@okthen8445 9 лет назад

What's a good pad for removing water spots on paint and glass?

@user-hb8be5wb4q 6 лет назад

I also would like to know how to clean the pads, dry, and can the pads be reused? What speeds does the machine use, I understand low, med, hi, but I'm asking rpm information. Thank you.

@ChemicalGuys 6 лет назад

Hi! Yes, Hex Logic pads sure can be reused when cleaned and cared for properly. You have a couple of options when it comes to cleaning your pads. You can either clean them by hand with a brush and Pad Cleaner, or you can use the Universal Pad Washer. If you only have a couple of pads to clean, then doing it by hand is probably sufficient. However, if you run a shop or detail many cars, the pad washer is probably a good investment. After cleaning the pads, allow to air dry in a clean, dry location. I will leave a link to some videos below on how to clean pads. Enjoy! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-B01zu7wuGA0.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4vfvP1Z2R4U.html

@hxgz 8 лет назад

what kind of pad should i use ? i have tried the orange pad and just want to remove some swirls and minor scratches, but the orange pad just creates far more swirls and clear scratches.. 2003 audi a4

@ricardorivera6359 3 года назад

What you recommended for polish clear coat

@ChemicalGuys 3 года назад

Hi Ricardo! Start with an Orange Hex-Logic Pad and V36 Cutting Polish. From there you can determine if more abrasives are necessary.

@gregorw123 11 лет назад

When i am polishing my orange pad and some v34 i find that half way through the job the pad gets clogged with the polish and isn't as effective as when i first started out on the car. Is there something i am doing wrong?