Polishing Car Paintwork for Beginners Guide

Подписаться 347 тыс.

Просмотров 21 тыс.

50% 1

----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2687409/1012495/...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing

Авто/Мото

Опубликовано:

27 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@saiiiiiii1 11 месяцев назад

Back to the roots. I love it. This channel got me hyped for detailing years ago. 👌

@benmulleady7266 11 месяцев назад

Having done this on two cars now with less than amazing results I think its important to manage.your expectations for your first time machine polishing a car. If you're polishing a car with 1-5 year old paint you may well get excellent results. If like me you tackled 12 year old paint with lots of etchings, deeper scratches and other defects you are unlikely to get something close to perfect. You can only do so much at home in my opinion without goi g through so many steps that you'd need another car to use while the one you're polishing stays in your garage for a week or more. Just a bit of a reality check for those of us trying to do this over a weekend, it's a stretch

@EazyDuz18 Месяц назад

cope

@GuyverGamingTV 11 месяцев назад

super helpful video as always, been many years since i did any cutting and polishing. i had Autoglym stuff and had to throw it away last week as it was about 15 years old lol. i really would love some cordless DA's, would save my back a bit and be prob better build then my old Meguiras DA

@jonathonbrett-qn1ic 11 месяцев назад

Thank you for showing us this :) Great demo video

@martinboulden4388 11 месяцев назад

Fabulous Video Jon. ❤

@piovo5222 11 месяцев назад

My go to for a kind of one step on lightly swirled vehicles is 3D One 400 and a Buff n shine urofiber pad.

@ForensicDetailing 11 месяцев назад

that 3d speed is wicked single stage AIO.

@user-qd9ii7it6w 11 месяцев назад

I have just had my first go at using a dual action polisher using koch 6 , looked good afterwards and shined but on a closer look there was still some scratches showing from when the car was driven through bushes . Would you recommend going over it again with koch 6 and another 4 passes ?

@zzhughesd 11 месяцев назад

P3000 absolutely max wet sand gently carefully yes Jon. Say half a panel. Not entire car.

@thesamsquatch5224 11 месяцев назад

I always use a slightly dampened pad to avoid dry polishing and I clean pads after each panel

@rojoeclipse94 11 месяцев назад

Slightly dampened? As in maybe with a simple quick spritz of water on the pad correct?

@foxsake_ 11 месяцев назад

I have the meguiars set.. compound polish wax.. any1 done all three?

@jamescapon6607 11 месяцев назад

Result. I’ve just bought a Dewalt polisher with pads and polish.

@Jordwm 11 месяцев назад

Make sure you have a fast charger or 3 + batteries . The dewalt absolutely munches through batteries

@jayem4366 11 месяцев назад

@Forensic Detailing Channel : New Subscriber here, keep on the amazing content. I want to ask you, you posted a video of polishing pipes with a drill bit (rubbered looking wheel) and a belt. Do you mind giving more information on the drill bit used and what polishing belt/compound you used? would be grateful to see a reply! Thanks!

@ForensicDetailing 11 месяцев назад

I made the belt from microfiber towels m8. The chuck bit is a sanding bit

@davidboyce6427 11 месяцев назад

Jon I’m a modern day bumbling Peter Sellers. What cordless Rotary would you suggest for a newbie😩😆🥸

@ForensicDetailing 11 месяцев назад

DeWalt m8

@marcuslima2535 10 месяцев назад

Hi my friend, I have some customers with a good car paint, but few scratches here and there, insted doing the whole car with a heavy cut like da coarse, would you use the heavy cut just on those areas and then do the entire car with a finishing polish or AIO like uno protect? many thanks

@ForensicDetailing 10 месяцев назад

only problem with that approach is inconsistent clearcoat levels. But yes you could do that if you wanted to in order to save time m8.

@kevy2300 11 месяцев назад

Hi John, love the channel after subscribing 3 years ago. Need some advise if you don't mind. Bought an LG2500 from in2detailing last year I'm unsure what pads to buy. Got a metallic blue focus RS mk2 with slight swirl marks. I'm thinking of going with autoglym resin polish for the initial cut, then turtle wax graphene for the final polish. Which pads would you recommend for each. Much appreciated

@ForensicDetailing 11 месяцев назад

Hi Mate, I would start with Flex Orange pads and Rupes Uno Advanced AIO polish. job done nothing else needed that will also protect the car like a wax.

@kevy2300 11 месяцев назад

@@ForensicDetailing what about a finishing pad mate

@djmandrick 11 месяцев назад

@@kevy2300 Rupes advanced is an All In One (AIO), single stage compound, so you only need one pad. Ford paint is soft and having done many a single stage sould do you fine. autoglym resin polish is ok for a temporary top up to look shiny but it has a filler in it (the resin i guess!) to mask the deeper scratches a little (which basically comes out over time - usually a couple of weeks especially if it rains.) Using a compound like Uno will give you a decent cut to remove the need for the filler and look better for a lot longer as it is removing more defects as opposed to polishing hte surface and hiding the rest. I've trie hte autoglym method by hand and polisher, single stage and multiple mulitistage processes on various fords, and that is my experience of autoglym resin polish. As Jon says you wont need to apply wax or anythign else after as the compound itself has that in it as well. Its expensive stuff but worth it for a great finish and the time it saves is massive in cutting entire processes, especially for times like yours when there is jsut scuffs and some light swirl marks. (make sure you get the Uno Advanced, another is similarly named and cheaper but its different stuff. Just but a small bottle, as you'll find it goes a long way)

@owensteele1645 11 месяцев назад

We have come a very long way in such a short space of time, in terms of polishing. My colleagues and I were reminiscing about when we used to cut up our old T-shirts to polish our cars with Tetrosyl T-Cut and follow up with Turtle Wax Hard Shell paste wax. Stuff was a terrible pig to remove and that was how I got my six-pack and biceps, but the shine was amazing, especially if you were fortunate enough to own a red car. Happy days.

@marcuslima2535 10 месяцев назад

Which finish you recommend for more gloss? DA Fine, pure ultra or advanced? I dont care about sealant properties, wanna the more glossier. cheers

@ForensicDetailing 10 месяцев назад

Advanced m8

@hezeone801 11 месяцев назад

What do you think about to start with rotary cut first than finish with forced rotary?

@ForensicDetailing 11 месяцев назад

Cut and finish with the forced rotation m8

@100moula9 11 месяцев назад

The bumper on my car won’t cut out swirls and scratches remain as if I didn’t do anything, no matter how aggressive I get. They are that plastic bumper material which is different from the body obviously but I didn’t expect to get such poor results! Am I doing something wrong?

@ForensicDetailing 11 месяцев назад

More likely mavhjnf Marringm8

@magic2427 11 месяцев назад

Hi Jon hope ur well, what do u think of the 3m 3 stage polishing compounds

@ForensicDetailing 11 месяцев назад

I prefer koch or scholl stuff mate but its widely used by bodyshops.

@magic2427 11 месяцев назад

@@ForensicDetailing thanks Jon il try scholl stuff 👍🏽

@jamiemackenzie2469 11 месяцев назад

What pads do you recommend for cutting and polishing?

@ForensicDetailing 11 месяцев назад

generally flex purples to cut and flex oranges to polish but it does depend on what your doing. You would not really take out sanding marks all over a car with flex purples for example. but for standard detailing stuff those 2 pads can cope with most things.

@MrLinzard 10 месяцев назад

Can i ask since i am confused. Whats the best order of detailing? Prewash snownfoam, hand wash shampoo both neutral then whats next? Polish, wax and then ceramic? Or is ceramic instead of wax? Thanks

@ForensicDetailing 10 месяцев назад

Prewash, wash, decon if required, polish if required, protect (dont wax then ceramic the coating wont bond)

@MrLinzard 10 месяцев назад

@@ForensicDetailing thanks thats a start for me.

@DavidC1 11 месяцев назад

forced rotation all the way

@1stfrompuertorico568 11 месяцев назад

Nice!!!!

@izzyxoxo7287 11 месяцев назад

😂 Sealey Chinese sh*t.

@gregsullivan7408 11 месяцев назад

Sigh - yet another "beginners" video. When are we going to get the "advanced" material? 🤣

@ForensicDetailing 11 месяцев назад

thats an interesting comment fair play. Im not sure I ever really do advanced I tend to just do basic stuff. But yer ill have a think about this.

@gregsullivan7408 11 месяцев назад

@@ForensicDetailing "10 secrets Paul Dalton doesn't want you to know" 🤣

@gregsullivan7408 11 месяцев назад

@@ForensicDetailing actually I have a serious suggestion. Recently I watched a video from Corey of "Sky's The Limit Car Care". He was talking about what it takes to become a certified CarPro coating installer, and one requirement is to be able to demonstrate exceptional skill at polishing, and one aspect of that is being able to achieve a very high quality finish all the way to the very edge of panels. It seems that takes extra skill. Perhaps you could speak to that?