Тёмный

Forensic Detailing 5 STAR RATED DETAILING PRODUCTS 

Forensic Detailing Channel
Подписаться 346 тыс.
Просмотров 29 тыс.
50% 1

Shop 5 star products here:
tinyurl.com/5h8spcr2
(try code forensic for 10% not all items can be discounted)
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2687409/1012495/...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing

Авто/Мото

Опубликовано:

 

9 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 142   
@boofstien2
@boofstien2 Год назад
John: "dont just go out and buy these because I said they are good If you allready use something else" Me: [Closes detailing supplies website of choice] "sigh"
@rezi420
@rezi420 Год назад
Thanks for all the valuable info, great video
@ImranAli-rp4kd
@ImranAli-rp4kd Год назад
Finally got my car coated with mohs evo and it’s amazing , easy to apply and when I come back next day the gloss level had increased after 12 hours or so, amazing heading and anyone can apply it without any issues
@andrewcollier7549
@andrewcollier7549 Год назад
Brilliant I always come to this channel for advice 2nd to none you are the best
@jonnybravo3055
@jonnybravo3055 Год назад
Best channel on RU-vid. 👍🏼10/10
@klasseact6663
@klasseact6663 Год назад
Great video Jon😎👍❗️
@paul6749
@paul6749 Год назад
Thanks John, very interested to see a comparison between the US Ice Seal N Shine and the UK version. FSE is one of best products on my shelf. Hope you review Sonax Perfect Finish at some point.
@ninjascoob
@ninjascoob Год назад
I’ve been recommending scholl concepts to people for years. I have both s20 and s40. I’ve just bought their W6 coatwax to try out. I originally bought the scholl products because you can use them in direct sunlight. They just don’t dry out
@ninjascoob
@ninjascoob Год назад
I also use scholl concepts super speed wax detail spray
@01123581321341
@01123581321341 Год назад
Agree the Rupes abrasives and pads are 5 star 👌. I do have an APC (Greenstar) but other than engine bays I don’t really use it…? For interior ? - I use dedicated cleaner. For wheels?- I use a dedicated cleaner….not sure why we need them so much but maybe just me. YumDetailer and YumDress are worth checking out - lovely, glossy and good value.
@zzhughesd
@zzhughesd Год назад
Nice Sunday re fresher. Thanks Jon
@danielsalero1332
@danielsalero1332 Год назад
Fantastic video John 👏
@cfwebdeveloper
@cfwebdeveloper Год назад
Yea interested in seeing that P&S Absolute rinseless wash. I've watched other videos but I would like to see more videos out of it. I just got it and planning on using it when it's not raining, which is almost daily in the summer here in the southern US. 😶‍🌫
@Mogsy28uk
@Mogsy28uk Год назад
Jon for spray/rinse wax's, TW Dry & Shine still available, usually get it for £7-8 in local stores. Best results these days are from Bouncer's Bead Juice or IW Express Sealant. Wet Coat just cost too much compared to those. AM Details are testing a spray/rinse wax too. IW Rapid Detailer also very good, cost effective and a fine drying aid, I also use AM Hybrid Detailer as drying aid and final buff after waxing (IW SuperGloss+ Spray Wax). Glass protection has to be AM Rain or IW Diamond Vision, for good price and protection duration (my car is outside 24x7x365). Tyre protection, i used to use PERL diluted 50/50 or Gyeon Q2 Tyre Gel (messy), but now only use IW Tyre Coat.
@jwilson1744
@jwilson1744 Год назад
I liked Wet Coat on first use, but now in a hose pipe ban so no more pressure washer washes for a while (I’m using N914 on your recommendation). Is there a ‘dry’ spray on equivalent? Or is it just the choice between a QD like Ceramic Detailer (spray on) or using a ‘proper’ ceramic (not spray on) like Can Coat?
@JR-rr7mx
@JR-rr7mx Год назад
Bouncers DONE and DUSTERS is still a great product !! Has the bling factor.
@jayhoughton558
@jayhoughton558 Год назад
If you are interested in trying a new rinseless wash, P&S recently released one. Slicker than ONR but still polymer based. Sounds like a great product from what I’ve seen so far.
@daveallsopp320
@daveallsopp320 Год назад
Is it concentrated
@JWL-UK
@JWL-UK Год назад
The P&S rinseless wash looks exciting. I recommend people giving Bouncer's Wax RCD a try. It's super versatile, sleek and inexpensive. Same dilution as ONR and works out at £5/litre in the 5 Litre option using the code BYE.
@MrDogstarr
@MrDogstarr Год назад
I think that pigeon was trying to tell you it was time for a cuppa! 😀
@yeldaRooBTKAM
@yeldaRooBTKAM Год назад
Thanks, Jon.
@stephenhone4546
@stephenhone4546 Год назад
Diamond Brite do a good fine cut and polish all in one! Good video 😊
@lifeslooker
@lifeslooker Год назад
Pressure washer - K7 - but what if your hose connections break ( like mine have ) and need a more sturdier one? What one would you recommend?
@RobertSmith-di5ll
@RobertSmith-di5ll Год назад
Wonderful and very useful
@jwilson1744
@jwilson1744 Год назад
Jon, nice refresher across the range of products we use. Wondered about Uno Advanced, saw your comparison with Uno Protect, but then saw how that faired against BH Micro Fine. Where would Uno Advamced be vs Micro Fine on protection/cut?
@theweekend8469
@theweekend8469 Год назад
Hiya John, thanks for the great video again. Just a quick question. Where do you get you solution containers. The ones where you store you diluted solutions from please? The ones show at the begining of the video. Thanks
@ForensicDetailing
@ForensicDetailing Год назад
lab unlimited mate
@daveallsopp320
@daveallsopp320 Год назад
Great stuff Jon as usual, do you have a link for the measuring bottles you use👍🏽👍🏽👍🏽
@ForensicDetailing
@ForensicDetailing Год назад
Tolco proprtioners I think m8 in2detailing sell them
@petrolheaven67
@petrolheaven67 Год назад
Nice meeting you the other day looking forward to the golf video
@ForensicDetailing
@ForensicDetailing Год назад
Hey Shaun likewise m8, should be out soon just got to film the handback to the owner.
@ryangough6633
@ryangough6633 Год назад
Hi Jon would you be able to do a video on spray and rinse sealant like polar seal or blue rinse would love to see a shot out video on them
@ForensicDetailing
@ForensicDetailing Год назад
See the best spray and rinse video m8
@johndrake2147
@johndrake2147 Год назад
Regarding the wet vac - what model is the Flex ? I often have animals in the car / on the couch so I'd definitely get a good deal of use out of one as well as those cleaning brushes that you use with drills. ! Bilt Hamber & Koch Chemie are fantastic products alright. Thanks J !
@ForensicDetailing
@ForensicDetailing Год назад
hi john flex is LC21 I think. vax is spotwash duo.
@leebroderick9668
@leebroderick9668 Год назад
Still like Menzerna 2 in 1 as a polish & finish. As a three stage, I normally use one of their heavy cuts, followed by their 3 in 1, then the 2 in 1. Not sure if that's ironic!
@stuartnicol
@stuartnicol Год назад
Cheers Jon. I was using Scholl Concepts W6 Coat Wax yesterday which seemed really good to work with and left a great slickness to the paintwork too. Haven't seen any really good reviews or tests with it so far. Is this something you've had on your radar?
@ForensicDetailing
@ForensicDetailing Год назад
Will try and check it m8
@orthodox1717
@orthodox1717 Год назад
Awesome video, thanks! Is MOHS a ceramic based coating? I heard it’s not.
@ForensicDetailing
@ForensicDetailing Год назад
its a ceramic coating basically yer.
@tripsingh3642
@tripsingh3642 Год назад
Thanks for the effort and your time, I just wanted to ask you is the turtlewax seal and shine the same as the sealant in the uk, I have the one stating sealant spray with carnauba black bottle
@ForensicDetailing
@ForensicDetailing Год назад
No m8 I show the difference soon
@tripsingh3642
@tripsingh3642 Год назад
@@ForensicDetailing Thanks will be good to see, I believe halfords sell now the seal and shine I wonder if its a new packaging label or the formula is the same as the usa
@markopolo9936
@markopolo9936 Год назад
I think they must have fixed your issue with the MJJC Lance, I’ve never had that problem with mine in all the time I’ve had it. It’s certainly a great Lance.
@mact153
@mact153 Год назад
You should give epic automotive Products a look , the detail spray is very good
@stephenmajor660
@stephenmajor660 Год назад
What metal polish would you use to get mirror finish? Also how would you prep a fuel tank on a lorry and protect it?
@ForensicDetailing
@ForensicDetailing Год назад
I use white diamond mate on wool or course foam. fuel tank if its bare metal, clean it, buff the crap out of it with white diamond on a rotary.
@fluzzerr
@fluzzerr Год назад
Does the Bilt-Hamber Korrosol remove really caked on brake dust as well?
@ForensicDetailing
@ForensicDetailing Год назад
generally yes. if korrosol and an atlasta brush cant shift it you can try an acid
@Steve19055
@Steve19055 Год назад
Where did you Get those flasks with the measure cup at the top with the bilt hamber autowash on?
@ForensicDetailing
@ForensicDetailing Год назад
See other comments pls
@79blustone
@79blustone Год назад
The guy below pipped me to the post, with P&S Absolute waterless wash/ rinseless wash eitherway. I'm using Carpro ECH20 which is working well- I go over it afterwards with Griot's Garage 3 in 1 for extra pop. But I've heard Absolute has the same encapsulation methods used in N914 and the new version of ONR but Absolute leaves a nice slick-to-touch film afterwards which sounds amazing. So, when ECH20 runs out, I'll grab a bottle to try. I also completely agree on Jon's choices of products, I'm firmly up there with Bilt Hamber (clearly) and I just cannot fault it. I used a bit of Gyeon and Carpro but I like how Bilt Hamber works. I will say that Gyeon wet coat seems to leave a filmy marks behind on the paint work even after towel drying, so I then have to go over it to get that glossy finish afterwards with Griot's with easily removes this. What am I doing wrong? Or is it just wet coat? Can coat is a great product and use it on all the plastics, side glass, rubber trims, wiper arms and wiper panel as the rest of the car is coated with Capro CQuartz UK 3.0 x2 layers with 2 layers of Capro S.I.C for extra gloss, pop and slickness not to mention giving you more durability combined then each on their own. Great video and happy to see a lot of my products I still currently use is being used by someone very professional 😊 👍
@brandonherrera2891
@brandonherrera2891 Год назад
I get the same from wet coat. supposedly it's from using too much product
@StrikesAk
@StrikesAk Год назад
Really surprised you didn’t have P&S beadmaker on here! Constantly gets the highest gloss levels!
@-GRHD-
@-GRHD- Год назад
Very informative, honestly this channel has helped me out so much since I started detailing, especially with products.. how do you like collinite 845 and how easy is the application? I have just ordered some and I'm not sure how easy the application is/how long it will truly last but have heard good things.. have you tried anything from the brand pure definition? Their stuff is quite cheap and pretty good so would be interesting to see it pop up on the channel one day
@ForensicDetailing
@ForensicDetailing Год назад
845 is decent mate, its a bit stiff to buff but has decent durability for old school wax. S
@haroldcottam8174
@haroldcottam8174 Год назад
Great video. Where did you get the RTU containers with the spigot? Thanks
@ForensicDetailing
@ForensicDetailing Год назад
labs unlimited mate in the UK.
@Flyingtwiglet
@Flyingtwiglet Год назад
@@ForensicDetailing I cant find those RTU containers on LU, what are they called? Do you have a link? Thanks.
@Simb-l
@Simb-l Год назад
It would be great to see some foam cannon sealants/ coating like waxisdead ceramic foam
@jjd975975
@jjd975975 Год назад
I still really like the Sonax BSD
@hartlanddetailer5670
@hartlanddetailer5670 Год назад
Jon, for the detailers living in states, I chose products that are made in the US (when possible) and are most reasonably priced products. In the States, best & most reasonable priced APC is Super Clean, about $22.00 (US) for 2.5 gallons. Best & most reasonable priced pH neutral Shampoo comes from 3D One, Nano Pale, about $40.00 for 5 gallons (dilutable). I like the Work Stuff brushes, last forever. Drying towels, I use air, so mude point for me. Tar removal, I use Goo Gone Pro. It is reasonable priced about $10.00 for Qt. Fallout remover (chemical Decon.) I use Adams for about $40.00 per gallon. I use a clay towel when washing, so I kill two steps in one. Panel prep, I use 91% ISP mixed about 20% IPA-80% distilled water. For compound/polish I use 3D One. Sealants, I will use TW Seal "N Shine, or Griot's 3 in 1 Ceramic Spray Wax, or Pro Wax Synergy Ceramic Detailer, or Adams Advanced Graphene/Ceramic Spray Wax, depends on the coating? I like to use the pads from Lake Country or the Euro 50/50. All in one, I will use 3D HD Speed. Metal polish I use Mother's with the wadding clothes from Eagle. Tire protection I like Optimum Tire Gel, for me works better than Car Pro Peryl. Next, for tire shine, when my Optimum Tire Gel runs out, I will use from Pro Wax, Blue Ice, about $29.00 per gallon. When choosing products, try to find that work, reasonable priced and easily available in your market!. Jon, thanks for your list!
@duhsasekirom5471
@duhsasekirom5471 Год назад
03.45 Maestro, take apart that plastic red and black part from the MJCC and put silicone grease inside where they join so that the friction is reduced and they can be rotated separately. Greeting!😉
@ForensicDetailing
@ForensicDetailing Год назад
I want to lock the axel rotation but really
@duhsasekirom5471
@duhsasekirom5471 Год назад
@@ForensicDetailing I don't know if you disassembled the MJCC, but first you have to remove that metal pin that goes through the red plastic part. When you have removed the pin, you can remove the red and black plastic part together from the rest of the foam lance. You will now see an o-ring on the foam lance and carefully remove it and wipe off all the grease on it and on the groove from where you took it out and also in the inner part of the red plastic, so that later it will be more difficult to turn when you turn the front black plastic part with which you change the angle foam spray width. After this very, very carefully separate the red and black plastic part (so that you don't break those two tabs on the black plastic part) and put silicone grease on the joint between them. When you put everything back together it should work properly with one hand, and the foam spray angle and horizontal-vertical axis depending on which part you want to adjust. I would like to ask you a few questions about car detailing, because I see that you have a lot of knowledge and experience in this field, but first let me help you solve your problem.
@mclarenformula5042
@mclarenformula5042 Год назад
Should do a review on cartech abbrasives if you can 👍
@scottward8446
@scottward8446 Год назад
They sell the new seal and shine in the UK now.
@danayalon5313
@danayalon5313 Год назад
Hey all, weekend warrior here. I'm using tomorrow the koch chemie h9 compound tomorrow and wondering if I should use the fine cut and them the micro cut or only the heavy and micro cut. (Wanting a show car finish) I don't mind spending the time for that one extra step but only if it's worth it
@ForensicDetailing
@ForensicDetailing Год назад
H9 to cut. M3 to finish mate.
@79blustone
@79blustone Год назад
A quick personal recommendation is Carpro inner QD. For the interior of the car is really nice to use on something not too soiled. It has a dust repelling feature and slick feeling behind but also leaving the finish look like how it should be from the factory. Also, definitely use this on your phone as it cleans it extremely well and makes the screen feel amazing and slick afterwards. It's like a slick ceramic feel that lasts for ages! Best thing I've used! Especially noticeable on my phone 😆
@stephendoyle7298
@stephendoyle7298 Год назад
Can you use bilt hamber qd on a ceramic coated car or will it mask it, currently have carpro cquartz uk 3.0 with gliss on top?
@ForensicDetailing
@ForensicDetailing Год назад
you can but I guess its best to maintain the coating with something designed to top it you could argue.
@stephendoyle7298
@stephendoyle7298 Год назад
@@ForensicDetailing thanks for the feedback, I would like to see a maintenance wash video on ceramic coating especially on decontamination maybe in the future.
@steedy27
@steedy27 Год назад
Jon What was the green liquid in the wash category, did you miss it out?.
@ForensicDetailing
@ForensicDetailing Год назад
thats alien magic gamma
@telstar4772
@telstar4772 Год назад
Interestingly you recommend Bilt Hambers Auto foam over their Touchless Foam John, was it a cost decision?.
@ForensicDetailing
@ForensicDetailing Год назад
Otherwise round m8. Performance based decision TL bit better. Done videos on this m8
@johnp6987
@johnp6987 Год назад
Where did you get your product dispenser with the blue tap Jon?
@ForensicDetailing
@ForensicDetailing Год назад
Lab unlimited m8
@johnp6987
@johnp6987 Год назад
@@ForensicDetailing cheers ears
@lincolnjones938
@lincolnjones938 Год назад
Would you recommend a finishing polish after using S20?
@ForensicDetailing
@ForensicDetailing Год назад
only if your not happy with the finish. generally no
@You-are-right-but
@You-are-right-but Год назад
Hi John, your videos have been excellent but I have a question. How do you keep your snow foam Lance looking good and well maintained? My gear is gunking up with lime-scale, soap scum and Auto-wheels black residue on the brass fittings of my pump sprayer. Maybe a 'gear service and maintenance video' would be helpful? Thanks again. You are one of the best RU-vidr reviewers. Not just car care, I mean in any category. Period.
@ForensicDetailing
@ForensicDetailing Год назад
I just rinse the lance after using it. I only use it with soap. The mjjc. All you need to do is pop bar out of the plastic shaft and change filters m8.
@You-are-right-but
@You-are-right-but Год назад
@@ForensicDetailing Thanks John
@AlabamaTree
@AlabamaTree Год назад
I’m going for the BH ClayBar but can’t find anywhere that has ONR in stock.. no idea when it’s going to be back in, is there anything else I can use that comes recommended?
@ForensicDetailing
@ForensicDetailing Год назад
McKees m8
@AlabamaTree
@AlabamaTree Год назад
@@ForensicDetailing ….I’m on it. Thanks 👍🏽
@aimonecastellacci1618
@aimonecastellacci1618 Год назад
The griots brilliant finish foam gun is better than what you have shown!
@jamesstowers6014
@jamesstowers6014 Год назад
Can you please tell me the make of the cheaper polishing pads you mentioned
@ForensicDetailing
@ForensicDetailing Год назад
Rupes or zvizzer
@jamesstowers6014
@jamesstowers6014 Год назад
@@ForensicDetailing zvizzer thats the one , thanks alot jon
@gary6579
@gary6579 Год назад
H. I love the video content helps me out when detailing my cars...BUT I'm getting limited on space with containers for fluids. I seen them thin containers with taps. I was hoping you could put me in the direction to purchase some please......
@ForensicDetailing
@ForensicDetailing Год назад
Lab unlimited m8
@gary6579
@gary6579 Год назад
@@ForensicDetailing Thank you so much.
@philb4031
@philb4031 Год назад
hello - have you done any videos to cover interiors?
@ForensicDetailing
@ForensicDetailing Год назад
Yes m8
@peterbennpan7288
@peterbennpan7288 Год назад
Can you do a review on Dr Beasleys polishes & sealant please?
@ForensicDetailing
@ForensicDetailing Год назад
It's not really a thing here my m8
@D992
@D992 Год назад
Hi Jon. What % dilution do you use BH Surfex at as an APC please? Is 5% too strong? Cheers
@ForensicDetailing
@ForensicDetailing Год назад
1 interior 10 wheels tyres engine bay. 2 to 4 prewash
@D992
@D992 Год назад
@@ForensicDetailing Thanks Jon. I’m just in a quandary whether to get my usual Auto Foam or should I be daring and try Touchless 🤔 😹. Need to place a BH order 👍🏼👍🏼👍🏼
@You-are-right-but
@You-are-right-but Год назад
Guys, I use BH Autowash in a foam Cannon but I don't know the best mix. I use 5ml in a 1 litre cannon bottle for the car and foam cannon some into a single bucket full of water for the contact wash. Anyone else tried this? What's the best mix ratio?
@ForensicDetailing
@ForensicDetailing Год назад
Be careful not to ovet concebtrate
@You-are-right-but
@You-are-right-but Год назад
@@ForensicDetailing Thanks John, will do. I'm looking for an easy way to apply Autowash without using the 300 bucket method. Have you ever used the 'Cannon Method' to apply Autowash? Could you trial it?
@nunomuacho446
@nunomuacho446 Год назад
those measuring cups where do you get them?
@ForensicDetailing
@ForensicDetailing Год назад
In2detailing m8 tolco proprtioners
@nunomuacho446
@nunomuacho446 Год назад
@@ForensicDetailing thanks!
@kimandsally
@kimandsally Год назад
Hi Jon have you seen this: BIGBOI SNOW FOAMR CANNON 5 WAY if so what are your thoughts?
@ForensicDetailing
@ForensicDetailing Год назад
Not seen m8 8 look
@kimandsally
@kimandsally Год назад
@@ForensicDetailing Would be amazing if you can test one, you're so impartial no one else like you your the best.
@Tazz6326
@Tazz6326 Год назад
Do you know of an alloy wheel paint chip repair product please, something similar to Chipex car paint repair system? Thanks👍
@ForensicDetailing
@ForensicDetailing Год назад
It's a broad question Rob. Hard to write answer
@Tazz6326
@Tazz6326 Год назад
@@ForensicDetailing OK, got the smallest of chips right on the rim of my alloy, probably get away with a paint pen+build up the layers? There's no radial scuff/scratch marks.
@jeyomcnugget9584
@jeyomcnugget9584 Год назад
@@Tazz6326 I used to work at a car dealer and we used hammerite paint for alloys believe it or not lol. Looked decent enough on silver alloys. If you’ve a more complex colour I wouldn’t bother lol
@seanhamilton4175
@seanhamilton4175 Год назад
Is there one of these for interior products?
@ForensicDetailing
@ForensicDetailing Год назад
surfex HD done :)
@jasonw1207
@jasonw1207 Год назад
Jon, noticed BH touchcless latest batch foams more - anyone else noticed this?
@ForensicDetailing
@ForensicDetailing Год назад
Yer I talked about this not so long ago
@philtaylor5053
@philtaylor5053 Год назад
Jon, do you think Gyeon messed up with the MOHS packaging & it was meant to be called SHOW? I'm thinking when it was sent to the production team they read it upside down & when it eventually came back all printed off the team said 'Well, it's all done now, let's call it MOHS!' 🤣
@ForensicDetailing
@ForensicDetailing Год назад
MOHS is like the hardness scale that they use loosly for determining the coating hardness. so I think it was a play on this.
@littleboatcaptain6962
@littleboatcaptain6962 Год назад
I have to say ,I wish you lived next door to me . I would be round your garage every weekend
@andrewvickers4487
@andrewvickers4487 Год назад
👍
@zzhughesd
@zzhughesd Год назад
I have two litres fall out BH. Both Korossol and the other BH product. I don’t use it. I also don’t clay. Only dealing under £3000 cars. What should I use it on. I mix it with acid wheel cleaner but I honestly think it’s wasted on it. I too am very confused by fall out removers !!!!!! I’ve also learnt SurfexHD and APCs and even Tar film remover do ok as an acid wheel remover. It’s a wild world detailing. I’m such a noob!!!
@ForensicDetailing
@ForensicDetailing Год назад
most times you need to clay mate, the TandG and FR makes that overall process better so you paintwork doesnt have all bits all over it when you polish.
@zzhughesd
@zzhughesd Год назад
@@ForensicDetailing maybe I’ll clay within next 12 months. Always thought it was a step to far. Bet I’ll likely clay into next summer.
@WestfieldFreshAir
@WestfieldFreshAir Год назад
You won't say that it's a step too far after you've clayed a car.
@zzhughesd
@zzhughesd Год назад
@@WestfieldFreshAir I’ll move onto it come April. No warm garage over winter. I am cutting two or three cars a week without much finesse. Just get job done sell a sub £3000 car. I’d spend a day or more on my own car prep prior to cut. If needed. Though.
@chrisrees3872
@chrisrees3872 Год назад
Loving the garage therapy range so sticking with their products for now
@joeschmoe6908
@joeschmoe6908 Год назад
No solution finish?
@ForensicDetailing
@ForensicDetailing Год назад
Yer just sort of missed it but I have this
@joeschmoe6908
@joeschmoe6908 Год назад
@@ForensicDetailing yeah I know you do, I was surprised it didn't have it's own category. Not something you always need so hard to remember I guess.
@choosechancemobiledetailin9587
Black boys world that's a new one🤣
@glumdogtrillionaire
@glumdogtrillionaire Год назад
A I O Jon!
@ForensicDetailing
@ForensicDetailing Год назад
its wired wrong in my brain :(
@glumdogtrillionaire
@glumdogtrillionaire Год назад
@@ForensicDetailing nah leg end, you got it. you’ve finally nailed Forensic Detailing.
@rotemshoshani424
@rotemshoshani424 5 месяцев назад
😂 It’s the second video I hear him saying AOI
@cjtr83
@cjtr83 Год назад
The 'British' ICE Seal & Shine (Sealant Hydrophobic Wax) from Turtle Wax is exactly the same formula.
@ForensicDetailing
@ForensicDetailing Год назад
sealant hydrophobic wax is replaced with updated Seal and Shine UK version. Its not the same as the USA version of ICE seal and shine which I show in this video. And I also think the one I show in this video is not the latest US version either. I compare the 3 soon on the channel.
@DrNookie21
@DrNookie21 Год назад
Geon MOHS or SHOW😂😂😂😂
Далее
Best In Class - Koch Chemie Clinic at H20 ontario
47:56
Polishing Car Paintwork for Beginners Guide
25:29
Просмотров 21 тыс.
Polishing Basics:  How I Suggest You Should Start
48:42
Affordable detailing products and tools on AMAZON!
28:06
Clay Bar Detailing How To Clay Your Car Properly
18:43
Всегда проверяйте зеркала
0:21
Просмотров 974 тыс.