Thank you so much Garry! You saved me from whitecapping my newly installed paver patio. I had rented a plate compactor for the gravel layer, and was about to go out and use it on my contoured pavers. Thanks to you, I rented a paver roller, which has rollers on the bottom and vibrates with enough force to compact the pavers and get polymeric sand to fill the joints. Thanks again, I would have been very upset if I ruined this patio that I've been working so hard to build!
Great video. Than you. We just had to remove our joint sand and replace. One question. Over time the polymeric sand does fail correct? We do not think the contractor sealed our patio when it was originally done. We want to seal but will we still be able to pressure wash it out if years down the road it needs replaced again? Thank you - Tonni
Hello 👋🙋♂️there.. Amazing and very interesting video🎥.. Super like👌👌👌 Good information and very helpful Do keep posting Warm regards and best👍💯 wishes The UnknownManCub 👍😎👨🏭
I have a minor question that none of these videos address. WHAT EFFECT DOES THE BLOWN POLYMERIC SAND HAVE ON GRASS, FOLIAGE AND SOIL WHICH INEVITABLY GET COVERED IN SAND???
Can you apply polymeric sand over polymeric sand? We used polymeric sand on our pavers last year. Some of it is falling away, maybe down 1/4 inch in some spots. Can we put polymeric sand over polymeric sand? Thanks for any help!
I’m removing regular sand and want to put polymeric sand in . Should I tamp it down ? And can that be done by hand or should it be done with tamping machine ?
Most polymeric sands need vibration to get the air out so the sand can achieve optimal strength. If you have a small area you can use a hand tamper, a rubber hammer, a piece of wood with with some type of hammer to hit the pavers so you create vibration to remove the air in the sand. If it's a larger area than a plate compactor with or without protective pad (if you have textured pavers than you need the protective pad) would be best, or a roller compactor. If you can't find a plate compactor with the pad you can use plywood.
Good afternoon Gary. Definetely a great job on improving the previous contractor's poor job. I am planning on doing the same thing for my driveway and patio and had a question. Which sealer would be the best option for both type of pavers?, I have concrete in my driveway and limestone in my patio.
I can’t find any place that sells Techniseal products. I’m in California. Even Amazon has only tinted sealer available. I can’t even buy directly off Techniseal’s website. Their website also lists Ace Hardware as a place to buy, but there are no Techniseal products on Ace Hardware’s website. Where do you buy these products?
You would really have to hold the pressure washer in one place for some time for it to effect the bedding layer. I've pulled stones out to see if there is any removal of bedding sand and there isn't.
Personally speaking I've never used what the big box stores sell. We use what our stone supply/dealers sell. My local dealers stock, techniseal, alliance gator and evolution.