Тёмный

PORSCHE Cayman 981/991 FRUNK STRUT REPLACEMENT TUTORIAL | How to fix falling Porsche Hood Damper 

Jordan Payne
Подписаться 2,7 тыс.
Просмотров 2,2 тыс.
50% 1

Today we'll be fixing the falling hood on my Porsche 981 Cayman S by replacing the Front Trunk (Frunk) gas struts!
#porsche #porsche981 #porschecayman #porsche991 #hoodstrut #diy #porschemaintenance
00:00 Intro
00:17 Diagnosis and How the Gas Struts Work
01:28 Prep the Car
02:07 Frunk Hood Strut Installation
Join me in the garage today to fix the falling hood on my 2014 Porsche Cayman S. This is a common problem for any 981 model and 991 model Porsche. Frunt struts can cost quite a bit from porsche but buying the amazon brands works just fine. The Frunk struts are really simple and this job only requires a small flat head screwdriver. Simply put the flat head in the retaining clip on the strut end and pry it open to release the ball on the ball & socket joint of the frunk. This quick 3 minute tutorial is just about how long it took me to actually do this job, so you can do it too!
Buy these frunk struts at:
a.co/d/6GmqQZM
Follow my Datsun 280z build on instagram at:
/ sinful_280z
Thanks for watching!

Авто/Мото

Опубликовано:

 

6 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@starbasef
@starbasef 7 месяцев назад
The key shown is how to get the strut off. The strut end doesn't just "pop off" the ball. A clip must be pried. Thank you.
@tomangle1603
@tomangle1603 Год назад
Yup, I’d been putting this one off too. Super easy! Thank you!
@josephhorswell4839
@josephhorswell4839 5 месяцев назад
Thank you for your video! You aptly note that you don't need pop the clip our when you are installing the new lift struts. You simply push them on and they pop into place. This may not be obvious to everyone (unless they've done it before); but because you have to use a screwdriver to pop the clip out to get the old struts off, you don't need to partially pull out the clip on the new struts in order to install them. If you make this mistake, they are a bitch to get back on Lol.
@andresmattos7541
@andresmattos7541 Год назад
This video was so helpful! thank you sir!
@JordanPayneLV
@JordanPayneLV Год назад
Glad it helped! Thanks for watching 🙏🏻
@gibsonyu9220
@gibsonyu9220 Год назад
Thank you for the tip and the lead to the replacement part. Got mine and saved a lot. It is very strong, and the hood bounced when I installed 2. Decided to just install 1, and keep the weak worn original part on the other side. Moves up just right!
@JordanPayneLV
@JordanPayneLV Год назад
Glad it helped! They definitely are strong, mine have since worn down a little bit but it still pops up real fast!
@_sennastien_
@_sennastien_ Год назад
Thanks, it helped, a lot
@JordanPayneLV
@JordanPayneLV Год назад
Glad it helped! :)
@ericmed
@ericmed 3 месяца назад
The Porsche struts fail all the time
@JordanPayneLV
@JordanPayneLV 3 месяца назад
The replacements are still working fine 👌🏻
@martinp1544
@martinp1544 Год назад
Too Easy!
@JordanPayneLV
@JordanPayneLV Год назад
I shouldn’t have put off this small job for almost 2 years lol!
Далее
Porsche DOES NOT want you to know this!!!
18:53
Просмотров 372 тыс.
ХЕРЕЙД И НАТАХА У МЕНЯ ДОМА
4:58:08
WE COOKED A SHRIMP KEBAB  #recipe #barbecue #food
00:21
Просмотров 336 тыс.
Все кругом Миланы... 🤣
00:12
Просмотров 160 тыс.
Porsche 981 Gas strut replacement
5:00
Просмотров 496
Кто-то ездил в жару на УАЗе?😂
0:55
Крутыш на БМВ
0:12
Просмотров 746 тыс.