Porting our Eaton M90 Supercharger For Project F (L67 Supercharged Camaro Build!)

Подписаться 7 тыс.

Просмотров 24 тыс.

50% 1

In this video I show the process we take to port our 3rd gen Eaton M90 for Project F. First we bore out the intake to 75mm to accept the northstar V8 throttle body adapter. We then port the outlet of the supercharger for more flow. This effectively matches the efficiency of the gen 5 m90. We also show the ported lower intake manifold.
Please like and subscribe! Also check out our instagram page @Jury_Rig_Garage for up to date content on the build! Thanks for watching!
Viewable link to the Project F build spreadsheet: docs.google.co...

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@boostedproblems5139 4 года назад

Nice Work ! I Just put an M90 on My 2.5L Subaru, She is a ripper lol

@ericjorgensen7276 4 года назад

I have been down the same road man, stressed air compressor , sand rolls, and finger blasting ports with 2k sand paper good time!

@wedgeantilles7731 5 лет назад

Good progress! I'm excited to see more!

@JuryRigGarage 4 года назад

Thanks! More to come.

@420-V.T.L-Machinist 2 месяца назад

The hole you mentioned doesnt go anywhere might be where the 1996 blower case has a vacum T fitting. My 1996 park ave ultra has a fitting there with 3 vacuum lines that a 01 blower case isnt drilled and tapped for

@Bird_From_Hell 2 года назад

So what caused you guys to cancel the Supercharged aspect for the L67? Did you end up porting it wrong?

@ClintHoltHoltRoofing Год назад

Awesome

@adriansmith2065 5 лет назад

Keep up the good work, should make decent power, 3800s are a magical thing.

@JuryRigGarage 5 лет назад

Thanks!

@Melodic-Metal 2 года назад

U should hear when unblock those silencers….HEAVEN!!!!!

@troymomma Год назад

unblock? or block?

@gavinc8635 Год назад

What tool did you use to port the super charger ? Just a angle grinder ?

@micthegreasemonkey2918 4 года назад

I know its a bit late now but u can cut the lim with a metal bladed jig saw .but good job on the blower i think the pros use a mill to achieve that finish.

@JuryRigGarage 4 года назад

Thats a good idea for the LIM, I don't have a jig saw but that would make it much simpler.

@joepereyra2468 5 лет назад

Dope

@JuryRigGarage 5 лет назад

Joe Pereyra ✌🏻

@ebperformance8436 4 года назад

I’m doing a turbo I wonder if I can remove the underside of the blower for more airflow.

@JuryRigGarage 4 года назад

As long as the snout portion of the blower is blocked off you can gut the whole thing

@mitchellshannon4755 5 лет назад

I'm pretty sure this has something to do with a car

@VQ_rafa 3 года назад

what would be tbe diffrence an porting both manifold and sc?? and would i need to take off the snout ??

@JuryRigGarage 3 года назад

You’d want to remove the snout and rotors to keep them clean. Porting both will allow it to flow more, you’ll see less boost but it will be more efficient. You can put a smaller pulley on to make more

@VQ_rafa 3 года назад

what if i ported the supercharger up to the big hole the the manifold has ?? 🤔

@boosted0079 4 года назад

Unless you're gonna cut part of the firewall back somehow, your not going to be able to fit a 180⁰ tubing bend on the back. Cap off the inlet and cut a 2.5" hole in the inlet neck on passenger side and weld a 2.5" aluminum pipe in place. I've seen a few and they've all had to do the same thing. Check this link out. The guy tried the 180⁰ pipe bend at first, but had to go this route. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BIgkcfWaDwg.html Here's the video of it before the he had to change it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_dYSMAEv-Fw.html

@JuryRigGarage 4 года назад

Cutting the supercharger is definitely something we've considered. We have couple different things to try

@johnsmith-qz4bv 4 года назад

cool....can u use this on a new hemi..?

@JuryRigGarage 4 года назад

You can pretty much anything work with anything if you have the time and money. I suspect the M90 supercharger would be too small for a hemi though. You'd probably want a whipple, something 2.3l or bigger.

@johnsmith-qz4bv 4 года назад

@@JuryRigGarage ok thanks for your help....

@boosted0079 4 года назад

What valve springs did you go with?

@JuryRigGarage 4 года назад

I believe we went with 130lb springs, should be in the spreadsheet below

@Str8sixfan 5 лет назад

Should help F scream!

@dannyrivas5125 3 года назад

I got see results to see if doing something like that is better engine dyno results data before modification to stock that's just me

@JuryRigGarage 3 года назад

It all over RU-vid, lots of proven results

@bryantfoster6733 5 лет назад

Planning on throwing a m90 gen 3 on my 02 3.8, if you guys can hmu on Instagram @bryantfosters. I have a couple questions. (Am I going to need to get heads? If so what is the casting # on the heads?)

@JuryRigGarage 5 лет назад

We’ll shoot you a message

@geoffreygetzin3972 5 лет назад

If you top swap the N/A engine you will need the gen3 S/C, lower intake and the heads from a 3800 series 2 or 3 (L67/L32) due to the injector ports moving from the intake to the heads. Understand with a top swap compression will be higher so you will need to run a smaller pulley than a GTP with the same modifications. You will also need the 36lbs injectors, fuel rail, twin belt balancer and the idler and tension pulleys for the second belt.

@boosted0079 4 года назад

@whacky pax yes they do and the lower intake manifold is modified to accept the injectors that also come with the kit. If you use the L67 heads, I believe that's where the lower compression comes from if I'm not mistaken due to larger compression chambers.