Process of Making a powder coating oven from scratch

Prismatic Powders® | Top 5 Mistakes Beginner Powder Coaters Make

СБЕЖАЛ ОТ РОДАКОВ В ДУШЕ и ЭТО ЗАКОНЧИЛОСЬ ПЛОХО!! (SchoolBoy Runaway)

Is it impossible to cut off so much?💀🍗

Alisha Lehmann joins Juventus Women 🤍🖤

Красиво уехал в закат 🌅 #911 #порше #кабриолет #porschecabriolet #porschelife #porschemoment

Powder Coat Set Up for Small Business or Hobbyist

Martin James Designs

Подписаться 6 тыс.

Просмотров 108 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Welcome to Martin James Designs!
On this video I go over my powder coat set up for an avid hobbyist or even a small business. Here is the list of equipment I have
Sandblast cabinet: Magnum SBC420
Wash station: King Canada
Powdercoat booth: custom built. link to video
• How To Build a Paint &...
Powder Coat rack: custom built. link to video
• My First Welding Proje...
Powder Coat gun: Columbia coatings kool koat DPW 2.O
Powder: prismatic powders
Compressor: ingersoll rand 60 gallon 2 stage
Oven: Eastwood hot coat 4 x 4 x 6 powder coat oven
If you like content regarding powder coating, paint, fabrication and motorcycle building please consider hitting the subscribe button and clicking on the notification bell for all new videos
Thanks for watching!
Kodi Hopkins
Martin James Designs

Опубликовано:

11 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 148

@accuratealloys Год назад

I’m always glad when someone tells me to like and subscribe because no one knows how RU-vid works.

@logandillon5892 Месяц назад

Do you always complain about it too? I can’t even begin to think of the amount of time I’ve been about to click off a video and I hear them say that and it reminds me to like it. No one likes videos on youtube they just watch and move on.

@robertbragg9364 Год назад

It's definitely a professional setup for a home. Great ideas and great job setting everything up. You don't always need the best tools, and this is proof of what hard work can give you.

@bHappy777 9 месяцев назад

Excellent set up.

@jbcowherder6210 Месяц назад

didn't see if you already had it, but you should plumb in a pipe to the bottom of the air tank to drain moisture from ground level to make it easy to drain the tank every few working hours. nice shop setup

@haroldrushton6735 2 месяца назад

That is an awesome shop and setup! Very cool. You should do very well with that powder coat outfit. 👍

@KensGarage1 2 года назад

What a great shop. You have set it up very efficiently, not "junked" up. Wish I had that space available. Now I'll go look thru your other videos. Thanks!!!

@martinjamesdesigns3748 2 года назад

Thanks Ken! I really made it functional. It turned out great for what I’m using it for! Thanks for watching

@BJZaxoy29 Год назад

ru-vid.com

@rally91cam 2 года назад

That's a great set up you have there. Excellent job!!👍

@martinjamesdesigns3748 2 года назад

Thank you Arnaldo!

@accuratealloys Год назад

Nice setup. Not an amateur act that you have going.

@samneedham8473 2 года назад

So cool!! thanks for the inspiration!!!

@martinjamesdesigns3748 2 года назад

🙌🏻🙌🏻🙌🏻

@MrCarmelo1959 2 года назад

Awesome shop I’m following right behind you getting and doing mine thanks I’ll keep watching for more tips thanks

@martinjamesdesigns3748 2 года назад

Awesome! Thanks for watching! Good luck on your new shop! It’s sure great to be able to create in a well organized space!

@Buicksx2 2 года назад

Love your set up!

@martinjamesdesigns3748 2 года назад

Thanks!

@oldmountainmarineandmetals9736 Год назад

Nice setup! That shop is every man's dream but, you must have hit the lottery to be able to afford that Eastwood oven because I've priced them that's why I'm getting ready to build one with metal studs.

@brianhopkins6657 2 года назад

Very informative video Kodi and nice shop!

@martinjamesdesigns3748 2 года назад

Thanks for watching! I’m pretty excited to be all set up now 😊

@karirodriguez6740 Год назад

Awesome video. I have a fabrication shop and am asked about powder coating all the time. I will probably follow this model and set up a shop area. Definitely a subscriber and will now go on to you next videos!

@martinjamesdesigns3748 Год назад

Thanks i appreciate that! Honestly if your a fabricator I bet it’s frustrating to need to send then parts out and wait. Doing it yourself is such a time and money saver and it’s fun too!

@GlocksAndCrocs 2 месяца назад

Hitting the sub just for the fact of the air compressor.

@martinjamesdesigns3748 2 месяца назад

Thanks man! It is too small though! Lol

@MobileBicycleRepair505 2 года назад

That is a really good setup.

@martinjamesdesigns3748 2 года назад

Thanks!

@sanderstraat2397 2 года назад

Nice content and very clean shop! Keep up the good work.

@martinjamesdesigns3748 2 года назад

Thanks Sander!!!

@BJZaxoy29 Год назад

ru-vid.com

@brandonbeckham5729 2 года назад

Amazing setup man.

@martinjamesdesigns3748 2 года назад

Thanks Brandon! It works pretty well for what I use it for

@danielaragon6058 2 года назад

Very clean set up bro😎💯

@martinjamesdesigns3748 2 года назад

Thanks Daniel I appreciate that!

@Phil4013 Год назад

Dude that shop is on point! I’ve been fumbling through my projects with a Eastwood gun until I got a similar one to you. Game changer! I’ve been making art for a few friends here and there. I plan to up the game after I retire. It’s been a little tight in my garage that is already full of stuff. Now I gotta go look at your bike build! Cheers!

@martinjamesdesigns3748 Год назад

Thanks Paul! It sure makes a difference upgrading the gun. If your into art the possibilities are endless with all the colors! Thanks for watching 🤙🏼

@SheriffBo 2 года назад

This was on my recommended, just letting you know the algorithm fancied this video. (Subbed)

@martinjamesdesigns3748 2 года назад

Thanks! I appreciate that. I’ve been making videos for about a year and barely anyone seems to find them

@AdamColeman503 2 года назад

Subscribing because you have my dream shop setup and I want to be your friend now! Nice work brother!

@martinjamesdesigns3748 2 года назад

Haha! We can be friends 😂 man thanks for the comment! It turned out pretty slick. I’m super happy with the functionality of it! Been working out of small shops for my whole life so This was a dream of mine.

@Mr.frag-out Год назад

Nice buddy

@GMPC 2 года назад

Awesome shop bro

@martinjamesdesigns3748 2 года назад

Thanks man! I love your channel! I’m stoked for your nice comment 😊

@VitroFractal-mc 9 месяцев назад

Está tan nítido tu taller que parece de exhibición 👏🏼👏🏼👏🏼

@kingsatchsatcherwhite4921 2 года назад

Nice

@TheHalusis 2 месяца назад

nice nice

@iswardhi8518 Год назад

nice

@mikeloftis7616 2 года назад

Nice AF

@martinjamesdesigns3748 2 года назад

Thanks!

@papatonysworkshop6584 Год назад

Very much Kick Ass !!!!!

@martinjamesdesigns3748 Год назад

Thanks!

@kirklivernash4350 2 года назад

I love your set up! I am just getting ready to start powder coating, Would you do a video on how how you prep your project before powder coating. Cleaning What you use, off gassing, and so on

@martinjamesdesigns3748 2 года назад

Hey Kirk! That’s awesome that your getting into it. It’s sure fun! I totally would be up to making a video on that process. In the meantime I highly recommend heading over to royal coats powder coating. He has perfect videos of prep, getting started and all other sorts of stuff powder coat related.

@user-ic2cw6qz2s 4 месяца назад

great video! what gauge wire did you use for your ground?

@huntercimini5640 Год назад

Hey MJD!! Getting into the business myself and this video helped me more than any other!!!! which CFM size air regulator was that one you picked up!? I see a couple different options online and they all look the same besides the specs!! Thank you again for your time!

@martinjamesdesigns3748 Год назад

Hey Good question! I’m pretty sure it’s 120cfm. I can confirm next time I’m In the shop. The one I’m using is by devilbiss.

@big_daddee 2 года назад

Wow, very nice set up! What kind of fans are you running? Just subbed 👍

@martinjamesdesigns3748 2 года назад

Thanks! I appreciate that! Welcome. I used 2 BROAN in-line duct fans with variable speed fan controls

@user-zs3lu7qh8t 4 месяца назад

Just watched your video on your set up. Very impressed. Was thinkingbof getting the kool koat 2.0 and was wonder how you still like it. Any problems with it? Do you only use the 1 gun? Thanks.

@martinjamesdesigns3748 4 месяца назад

Thanks! Depending on what you’re doing the Kool Koat 2.0 works great for smaller projects like rims and motorcycle parts ect. If you’re running a powder coat business I’d recommend a bigger set up. The convenience of switching powders and quick cleaning makes this gun great for what I use it for. Running your own ground to a grounding rod is a must though

@calvinlopez8676 10 месяцев назад

Awesome shop!! Love how well put together it is. I am in the middle of looking for a good powder coating system and wanted to see how the Kool Koat 2.0 is performing now? Has it been a pretty reliable system? Also great work on the booth!!!

@martinjamesdesigns3748 10 месяцев назад

Thanks Calvin! Yes the Kool Koat 2.0 has been great. I don’t do very large projects, it’s mainly for my builds and sometimes bigger parts like rims ect. If your doing large volumes I’d recommend a bigger gun. It’s perfect for what I’m doing though

@davidgroskopf7898 2 года назад

Nice 👍 setup. Did you use more in the way of air/water filter ? I worked in a shop with an air compressor mounted high like yours and water was always a big problem.

@martinjamesdesigns3748 2 года назад

Thanks! Yes I have a 20ft coil of pipe under the compressor to cool the air before the water trap and then I also have water traps at all locations in the shop. I always drain the water ports weekly and have not had any issues yet!

@conover1978 Год назад

I really enjoyed the video! I just started a small business using everything you used and I’m just at the point I’m ready to upgrade everything. I used the harbor freight style powder coating system which works well but I go through way to much powder. I really love how your system used so little and your hopper bottles are integrated into the system. A lot less mess and storage looks great. Where did you get your filters? I’m planning to upgrade my oven as well and I had no idea Eastwood offered an oven as well. I guess it shouldn’t surprise me they have some awesome tools. I really like the way your shop is set up and looks very efficient. I’ve definitely subscribed. Thx for the great content.

@martinjamesdesigns3748 Год назад

Thanks for checking in and that’s awesome your starting your small business! Being able to do something you enjoy for a living is what we all strive for! Having a really good ground has been a huge part of using less powder and the gun I have works amazing for what I use it for. The filters are just 16”x20”x2” from my local hvac supplier. The Eastwood oven works amazing but it is pricey. If you have the ability to build your own out of sheet metal and a few old ovens would be probably a lot cheaper but the Eastwood one is plug and play ready to go which is nice! If you have any more questions just ask!

@conover1978 Год назад

Thanks man your a very big help. I’ve been using to thing of a filter. I fabed out my own booth completely out of aluminum with a box fan and it’s simple filter. I guess I need to step that up a bit. I really appreciate the support! I hope to binge out on all your video soon. Thanks agin!!

@martinjamesdesigns3748 Год назад

@@conover1978 anytime man!

@indylive4926 8 месяцев назад

Great videos! I just started building and selling drum smokers and am going to do the sandblasting and powdercoating myself instead of subbing it out. I also plan to offer sandblasting and powdercoating services to help make extra money. Do you powdercoat bike parts for customers and how would you price that work? TIA

@musicfan9062 2 года назад

Great video!! Can you link where you got the sandblasting cabinet I can’t find the front door loading when you pull up the SBC 420

@martinjamesdesigns3748 2 года назад

Thanks! I got it here in Canada at KMS Tools. To be honest the front load pours sand out every time you open it. That’s the one downfall with this one

@martinjamesdesigns3748 2 года назад

www.kmstools.com/

@medicbaldwin Год назад

I'm planning to get into a setup similar to yours thanks for the tour. I haven't seen too many "entry" level setups. I"m curious how you like your gun system since you've had it for a while now?

@martinjamesdesigns3748 Год назад

I love the gun! I bought the vortex cup set up as it is way more convenient for smaller jobs. The only thing is the quick connect is plastic and it breaks so I built my own

@guywalkerarmy Год назад

Hobbyist 🤣🤣🤣 got more money in that then any small businesses

@dirkventer8112 Год назад

Definitely

@BJZaxoy29 Год назад

ru-vid.com

@jarredsegal6842 Год назад

Most hobbyists will invest vastly more than any one small business as most businesses specialize while a hobbyist will go well beyond the scope for any one small job Ie drill presses, lathes, welders etc etc etc The motivations are different The business is in it for a comfortable living While the hobbyist does it because that’s what makes their lives comfortable You won’t find many painters with more than a basic socket set and or wrenches While the hobbyist will go above and beyond…… infinitely beyond

@martinjamesdesigns3748 10 месяцев назад

@@jarredsegal6842wow well said! Hobbyist does it for the love. Business does it for the money.

@Carloss80k 8 месяцев назад

@@jarredsegal6842 never thought of it that way. very wise thought

@Wayne_155 2 года назад

Hey Kodi, Merry Christmas 🎅 🎄 from Ontario. Love your setup, it's neat and organized. Where did you purchase the grounding rod❓❓ ☮

@martinjamesdesigns3748 2 года назад

Thanks Bob merry Christmas to you too! The grounding rod was purchased from rona. Lowes or Home Depot should carry them as well! It’s a 3/4” copper grounding rod

@charlespoirier5659 Год назад

does it gets dusty in the shop? I love your set up, I have the same gun😎

@martinjamesdesigns3748 Год назад

Thanks! I always have the fans going when I’m powdercoating and I clean up good after every time so it stays quite clean. There is some dust for sure but not nearly as bad as I thought.

@Iann128 Год назад

Nice setup! I have seen in the comments on the paint booth that you wished it was wider. How has it been working for you? I am at the needing a bigger oven stage. Can't afford that nice Eastwood one though so will be building one from parts.

@martinjamesdesigns3748 Год назад

Thanks Iann! Yes I do wish the booth was probably 3’ wider so I could move around the parts a bit better without having to work outside the booth. I’m happy with the fan set up cause it’s ample enough cfm to pull the powder away from outside. Yes I hear you on the oven! My first oven I built with metal studs and a few used ovens. 3 elements and reused the whole control and set up. It worked great but wasn’t an ideal set up for the amount of work I planned on doing.

@BJZaxoy29 Год назад

ru-vid.com

@raytitone1583 Год назад

@@martinjamesdesigns3748 this is the route i plan on going, have 4x4x4 bos welded up just need to finish building the door and get some used ovens to rob elements and control panel. just using a kitchen oven for small parts now but i wanna move to bigger and better things. great job on the video! you have any videos of the first oven by chance?

@martinjamesdesigns3748 Год назад

@@raytitone1583 yes episode 2 of the outcast build is where I was using the old oven in a friends shop before I built my shop

@raytitone1583 Год назад

@@martinjamesdesigns3748 hell yeah! Damn fast reply. Thank you sir! Im definitely gonna check it out and more videos on your channel, seems like you do the same stuff i like to do, and im always down to learn from someone else

@chipsammich2078 Год назад

Do you get any arcing to your led lights.. I have a very similar setup but i used the dry erase type board and i have A Kool Koat HD mine arcs over to the lights for some od reason..

@martinjamesdesigns3748 Год назад

Hey! No I don’t at all. I’ve never had an issue yet.

@chipsammich2078 Год назад

@@martinjamesdesigns3748 Yeah I'm pretty sure it's a settings or operator error flaw..

@user-xk7pm4nf3y Год назад

I recently bought the eastwood hot coat oven and it came with no wiring diagram. How do you wire this oven up. Any help will be appreciated.

@martinjamesdesigns3748 Год назад

Any electrician can connect the main power. It’s all prewired. You just need your main 40 amp breaker and the wire ran to the oven from the main panel. If you open the main box it shows you where the power wire connects too.

@conover1978 Год назад

I have one more question. How do you charge when powder coating? Sandblasting is one thing. But do you charge by the part or time or by the weight of the powder? That’s my biggest problem.

@martinjamesdesigns3748 Год назад

I honestly charge by the part. I like to see it first. Depending on the condition it’s in and what Color they chose will determine the price. If it’s a multi color powder it’s obviously more. I’d figure out how long it will take you and add your hourly rate and then charge a flat fee for your powder. I typically charge a lb of powder minimum which covers your cost. Sandblasting I always do hourly

@MilesHolt Год назад

How do you get the tiny spot under the hanging wire? Is there just always a bare spot

@martinjamesdesigns3748 Год назад

Yes every piece is different but typically you hang it from a part that won’t effect the end product. In this case I hung the sign from a mounting hole so you would never see it

@mattjefferis7823 7 месяцев назад

What was your total cost for the booth and the sandblasting machine looks great

@martinjamesdesigns3748 6 месяцев назад

The sand blast cabinet was around $1000 Canadian. It’s a decent cabinet but you need a big compressor to operate it. The booth was around $1200 for material and equipment (fans and lights) hope this helps!

@VineetGautam-lp4jl 4 месяца назад

What about the oven ? How much it cost ?

@projectpowersports Год назад

Any complaints on the hotcoat oven? I’m looking at it due to the fact it takes less than 50 amps to run. How long does it take to heat up? Thank you!

@projectpowersports Год назад

Are you using it on a 50 amp service?

@martinjamesdesigns3748 Год назад

I actually love this oven. I have a 100 amp service but it only takes 40 amps to operate. I had a 50 amp breaker on the panel originally but I was blowing some breakers when the compressor and oven were on at the same time so I had my electrician switch the main breaker out and it’s been great since. I would say it takes 10 minutes to get to 375-400 degrees

@projectpowersports Год назад

@@martinjamesdesigns3748 awesome to hear man! Thanks for the reply!

@phantomgarage1208 2 года назад

How's the Eastwood oven been? I've been looking into getting one but the only review on the Eastwood website said its built poorly and only lasts a few months.

@martinjamesdesigns3748 2 года назад

Hey! It’s actually built by another company and Eastwood puts their name on it. Davenport is the name and you can actually order direct through them and save some money. It’s just not branded. This oven is truly amazing. I’ve used it for countless hours and have never had a problem with it. Heats up quick, has a great fan that evenly distributes the heat and it’s well insulated, The outside barely gets hot. I’m happy with it this far and it’s been about a year since I’ve had it

@phantomgarage1208 2 года назад

@@martinjamesdesigns3748 that’s great to know! I’ll be ordering one shortly to start doing client work. (Been doing work for myself and my buddies for years)

@martinjamesdesigns3748 2 года назад

@@phantomgarage1208 yeah I haven’t got there yet! I enjoy doing projects for myself and some friends. This oven can definitely work for a small business. I have done motorcycle frames, rims and even a bumper

@gavingreer7094 Год назад

Stupid clean set up wow

@glock5050 Год назад

When you were looking for a new gun what made you get the kpw 2.0 over the dual voltage from East Wood?? Pros /con all that good stuff?????????

@martinjamesdesigns3748 Год назад

Hey man! I did some research and my friend had the dual voltage Eastwood gun and I found it wasn’t that more effective then the single. The one I got was more of a semi professional gun and it gave me the opportunity to get into more quality coatings for less then the professional ones. This gun has been amazing for me and I’ve had no issues

@caseyrhoads 2 года назад

How did you stack your black and red shelving.

@martinjamesdesigns3748 2 года назад

I used 2” aluminum flat stock and built brackets and drilled holes and bolted them to both sides of the racks then I lag bolted the racks as well to the back wall.

@caseyrhoads 2 года назад

@@martinjamesdesigns3748 thank you, and a very nice setup you have.

@martinjamesdesigns3748 2 года назад

@@caseyrhoads thanks Casey I appreciate that!

@leonarunok 6 месяцев назад

May I know where did you get the machine

@martinjamesdesigns3748 6 месяцев назад

What machine? The powder coat gun?

@leonarunok 6 месяцев назад

@@martinjamesdesigns3748 yes the powder coating gun

@417plasma6 2 года назад

I dont see this company in the US ..bummer

@Mms_35830 2 года назад

hello!is it possible to have a dialogue on your powder gun I would like to have details? thank you

@martinjamesdesigns3748 2 года назад

Hey Michael! I’d be happy to help. What do you mean by dialogue? The powder coat gun is made by Columbia coatings. It is the Kool Koat 2.0 DPW and the link is here where you can find all the details. Let me know if I can answer any more questions. 👍🏼 www.columbiacoatings.com/KK20DPW.aspx

@Mms_35830 2 года назад

@@martinjamesdesigns3748 thank you! I would like to have details on the use and the connection in order to realize the gun

@martinjamesdesigns3748 2 года назад

I will try and make a video shortly as a review and go over all the details. In the meantime if you have any direct questions I will do my best to answer them!

@Mms_35830 2 года назад

@@martinjamesdesigns3748 ok perfect I'm waiting for the video! because with mine low-end model, the powder flow is not constant so I would like to see how to remedy it thank you

@martinjamesdesigns3748 2 года назад

@@Mms_35830 typically that is the downfall with the Eastwood or harbour freight guns. I myself found it hard to have a consistent flow. With the Eastwood gun I found lower pressure with a good ground and a water trap/regulator was the most effective. This Columbia coatings gun has a design to push the powder out evenly through the bottle which gives a more consistent flow.

@Shanelyy 9 месяцев назад

Hello,can you help do one in Africa

@martinjamesdesigns3748 9 месяцев назад

Hello. I’m not sure how I would help?

@edwardyork5371 Год назад

M

@Arikos08 2 года назад

You don’t have a strip tank?

@martinjamesdesigns3748 2 года назад

No not yet. Just using it as a hobby set up. It’s on my list next so I can start doing rims. Just using air craft stripper or sand blasting at the momentb

@Arikos08 2 года назад

@@martinjamesdesigns3748 appreciate the response. I’m thinking about getting into the same hobby to but have no direction but I’m def subscribing to find out more. What tank are you looking into getting if you have any idea? Thank you

@martinjamesdesigns3748 2 года назад

@@Arikos08 no problem! go check out Royal Powder Coats. He made a video about the powder coat process and what tanks he is using. It was really helpful. I been mostly powder coating motorcycle parts since I set it up but I’m about to start an old Chevy pick up so a stripper tank will help out a lot!

@Arikos08 2 года назад

@@martinjamesdesigns3748 thanks Martin I will definitely do that appreciate the response.

@dakota3998 Год назад

Devilbliss

@accuratealloys Год назад

It’s not ‘Devil-biss. It’s De-‘vilbiss. But who cares. I like the Devil too.

@FryFlier 2 года назад

Jealous

@broderp Год назад

Hobbiezt my....... 💩

@martinjamesdesigns3748 Год назад

Fair enough. Thanks for watching. 🤙🏼

@StopTargetingOurKids 11 месяцев назад

Hobbyists don't have 500k worth of equipment lol. Awesome setup though

Далее

Process of Making a powder coating oven from scratch

24:27

Process of Making a powder coating oven from scratch

Просмотров 213 тыс.

Prismatic Powders® | Top 5 Mistakes Beginner Powder Coaters Make

10:48

Prismatic Powders® | Top 5 Mistakes Beginner Powder Coaters Make

Просмотров 36 тыс.

СБЕЖАЛ ОТ РОДАКОВ В ДУШЕ и ЭТО ЗАКОНЧИЛОСЬ ПЛОХО!! (SchoolBoy Runaway)

09:33

СБЕЖАЛ ОТ РОДАКОВ В ДУШЕ и ЭТО ЗАКОНЧИЛОСЬ ПЛОХО!! (SchoolBoy Runaway)

Просмотров 407 тыс.

Is it impossible to cut off so much?💀🍗

00:14

Is it impossible to cut off so much?💀🍗

Просмотров 4,3 млн

Alisha Lehmann joins Juventus Women 🤍🖤

00:16

Alisha Lehmann joins Juventus Women 🤍🖤

Просмотров 3,8 млн

Красиво уехал в закат 🌅 #911 #порше #кабриолет #porschecabriolet #porschelife #porschemoment

00:29

Красиво уехал в закат 🌅 #911 #порше #кабриолет #porschecabriolet #porschelife #porschemoment

Просмотров 126 тыс.

10 EASY Steps to Powder Coating at Home. How To Powdercoat

12:09

10 EASY Steps to Powder Coating at Home. How To Powdercoat

Просмотров 761 тыс.

Cost & Profit on a Set of Motorcycle Wheels

17:03

Cost & Profit on a Set of Motorcycle Wheels

Просмотров 55 тыс.

How To Powder Coat Without An Oven!

10:51

How To Powder Coat Without An Oven!

Просмотров 393 тыс.

My Budget Powder Coating Booth

6:48

My Budget Powder Coating Booth

Просмотров 43 тыс.

Neighbors Laughed at the Innovative Building of our Small-House, But then they were Amazed

24:57

Neighbors Laughed at the Innovative Building of our Small-House, But then they were Amazed

Просмотров 59 млн

Building the CHEAPEST Powdercoating Oven from SCRATCH and saving $7500

20:11

Building the CHEAPEST Powdercoating Oven from SCRATCH and saving $7500

Просмотров 347 тыс.

Is At-Home Powdercoating Worth It?

17:51

Is At-Home Powdercoating Worth It?

Просмотров 1,9 млн

How To Build a Paint & Powder Coat Booth

17:55

How To Build a Paint & Powder Coat Booth

Просмотров 29 тыс.

Building a Powdercoating Booth for Cheap! (DIY Spray Booth Build)

9:50

Building a Powdercoating Booth for Cheap! (DIY Spray Booth Build)

Просмотров 38 тыс.

I STARTED A POWDER COATING BUSINESS!

11:14

I STARTED A POWDER COATING BUSINESS!

Просмотров 127 тыс.

ТАТУИРОВКА прозрачной КРАСКОЙ

0:26

ТАТУИРОВКА прозрачной КРАСКОЙ

Просмотров 5 млн

Дочка помогла Отцу 🥹❤️ #shorts #фильмы

0:49

Дочка помогла Отцу 🥹❤️ #shorts #фильмы

Просмотров 7 млн

Разбил машинку в реале и сравнил повреждения с BeamNG Drive #shorts

0:43

Разбил машинку в реале и сравнил повреждения с BeamNG Drive #shorts

Просмотров 1,8 млн

Связала кофту пока ехала в машине | #джулай

0:37

Связала кофту пока ехала в машине | #джулай

Просмотров 6 млн

Когда решил жить отдельно от родителей.

0:12

Когда решил жить отдельно от родителей.

Просмотров 1,6 млн

После такого сервиса можно и не выжить....🤯

0:52

После такого сервиса можно и не выжить....🤯

Просмотров 3 млн

🔥 Лютая вещь для геймеров Да и вообще для тех кто проводит время за компом 💻

0:20

🔥 Лютая вещь для геймеров Да и вообще для тех кто проводит время за компом 💻

Просмотров 2,4 млн